Question about Belkin F8Z182 TuneCast Auto for iPhone and iPod (722868641798)

1 Answer

Belkin Tunecast auto F8Z343 just doesn't work

Hello. I've done everything to try to make this work. I press that "C" area and tune my radio to the station shown, and my iPod music just doesn't come through -- I either get the radio station or static. All the connections seem tight enough, and my iPod isn't in the "locked" position. Is there something else I should be doing? I've tried it with a number of radio stations....

Posted by on

  • 3 more comments 
  • Anonymous Jan 02, 2009

    I can't get mine working either

  • shfire2000 Jan 13, 2009

    Same problem, The clear scan only lands on the most strongest overpowering radio stations in the area. All the other frequency's I use get very bad reception from it at best.

  • SafariFerrar May 12, 2009

    Same deal. But I use an iPhone and the songs come out the iPhone's speakers. 


    So.. solution: Go to BestBuy. Purchase a new one. Save the receipt. Go sit in your car and make sure the new one works. Then take the old one and put in back in the package and take the receipt with it, up to the return counter and tell whoever that it didn't work and you'd just like your money back. :) That's what my friend told me to do. And I would never do that. 

  • lance hoblestein Oct 25, 2012

    Mine initially worked, but now i get a message on my iphone "this accessory is not supported on this device", or something along those lines and it will not play music. It jut plays through my phone it charges my phone but my music volume bar stays on the screen like nothing is plugged into it. Could it be a problem with my phone possibly?

  • lance hoblestein Oct 25, 2012

    My problem with this device is that it was initially working. Now it sais "accessory not supported on this device", or something along those lines. It charges my iphone but it wont play music or even register with my music. The volume bar is still there when i double click the home screen like nothing is plugged in. Do you think it could be a setting on my phone possibly or what is the problem?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi there
just bought same product - had trouble initially but friend told me to find fm station with the most static then tune device to that. save station on both device.
not all that impressed with device although it does work better at night - clearer signal perhaps.

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgot how to programme radio stations on Philips Micro System MC-222


Tuning to radio stations

  1. 1 Select TUNER source. ? TUNER is displayed briefly.
  2. 2 Press BAND once or more to select your
    waveband.
  1. 3 Press down on TUNING a? or a? and release button.
    ? The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.? If a FM station is received in stereo, STEREO is shown.
  2. 4 Repeat step 3 if necessary until you find the desired station.
To tune to a weak station, press TUNING briefly and repeatedly until you have found optimal reception.


Programming radio stations
You can store up to a total of 40 radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already.
Press PRESET 3 or 4 (on the remote control ¡ or TM ) to select the preset number where programming should start.
Note:
- If no preset number is selected, default is preset (1) and all your presets will be overridden.
Press PROGRAM for more than 2 seconds to activate programming.? AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW and LW.The last preset automatically stored will then be played.
Manual programming
Tune to your desired station (see "Tuning to radio stations").
Press PROGRAM to activate programming. ? PROGRAM flashes in the display.
Press PRESET 3 or 4 (on the remote control ¡ or TM ) to allocate a number from 1 to 40 to this station.
Press PROGRAM again to confirm the setting. ? PROGRAM disappears, the preset number and the frequency of the preset station are shown.
Repeat the above four steps to store other stations.

Jun 19, 2016 | Philips Audio Players & Recorders

Tip

How do I Attach my iPod to a Radio in a 2002 Miata


<p> <p>Apple's iPod is a great way to listen to your favorite music in private and comfortable. The transfer of this experience in the private confines of your Miata is a great way to enjoy your music while you drive. Apple recommends a variety of devices that you connect your iPod directly to your Miata radio. Attaching your iPod to the radio in his 2002 Miata is a task Hable accompli given the right materials and installation. <br /> <p><br /> <p>1. Buy a car adapter. Apple recommends a variety of products at a price range and power, the Monster iCar Play Wireless 800 FM Transmitter $ 79.95 Belkin Tune Cast Auto for Live for $ 69.95 in FM Transmitter Griffin Road Trip with Smarts scan for RDS + Power $ 99.95. All products are recommended by Apple, the producer and distributor of iPods and all are available through the online store Apple Auto Accessories.<br /> <p> <br /> <p>2. Attach confirmation that the iPod radio tuner device purchased at the door on your iPod and plug the other end of the device in device port Charger / charger in his 2002 Miata. Depending on the interior options that you selected for your Miata, and the automatic or manual transmission, the device port cigarette lighter / charger is located in the panel below the radio in the glove compartment or center console area between the two banks front. <br /> <p><br /> <p>3. Miata Turn on the radio and choose a radio station with little or no audible sound. Typical among the 90 FM stations are reserved for local stations with low transmission towers, so they are often your best option. <br /> <p><br /> <p>4. Connect your iPod and select the radio through stereo cables to your Miata on your device FM radio tuner. For example, if your radio is tuned to 88.1 Miata, you have radio receiver can be tuned to 88.1. <br />

on Aug 09, 2011 | Apple iPod touch

Tip

How to use your iPod as a radio.


Connect the iPod Radio Remote to your iPod Nano by plugging it into the dock connector. Plug your headphones into the port at the top of the Radio Remote, next to the hold switch.
Once the Radio Remote is connected, select "Music" and then "Radio" on your iPod. The Radio Remote will automatically tune in to the first available station it finds. The iPod screen will show the radio station and any other available information or data.
Press the center button on the iPod. Use your iPod click wheel to find other stations. Once you have found your favorite station, hold the "Center" button down until a triangle appears on the radio dialer on your iPod screen.
Step4 Once you have set up all of your favorite radio stations, use the "Next/Fast-Forward" or "Previous/Rewind" buttons to navigate between them.

on Feb 11, 2010 | Computers & Internet

1 Answer

Wat is het en wat doet het ?


De Belkin TuneCast 3 verbindt draagbare muziekspelers aan uw auto of stereo-installatie snel en gemakkelijk over FM- radiogolven.

May 16, 2015 | Belkin TuneCast 3 (F8M010) FM Transmitter

2 Answers

How do you auto preset radio stations?


Hello
[1] Press RADIO BAND.AUTO PRESET until the band you want appears on the display [direct power ON]. Each time you press the button the indication changes as follows. "FM" => "AM"
[2] Hold down TUNE+ or --ve until the frequency digits begin to change in the display.
The player automatically scans the radio frequencies and stops when it finda a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step.
If FM band is noisy, press the MODE repeteadly until "MONO" appears in the display and the radio will play it monatural. If FM radio signal at your area is very weak, this type of noise may occur. OK.

Sep 28, 2011 | Sony CFD-S350 Radio/Cassette/CD Boombox

2 Answers

How to make it work i have no instructions


make-work-no-instructions-bfxxrbmmyqdtirkdvrpqygkb-5-0.jpg
These instructions is direct from "Belkin" website.

-Glenn

Mar 03, 2011 | Belkin F8M066 TUNECAST UNIVERSAL FM...

2 Answers

What staion do i put my car radio on


You need to manually tune your radio on FM to whatever frequency you have chosen on the tune cast.

Feb 28, 2011 | Belkin F8Z209 TuneCast Auto and Dock...

1 Answer

I have no instructions for my tune cast auto. how do i use it


This is a link to the user manual for setup instructions...MANUAL

Aug 19, 2010 | Belkin TuneCast II FM Transmitter

Not finding what you are looking for?
Belkin F8Z182 TuneCast Auto for iPhone and iPod (722868641798) Logo

Related Topics:

1,956 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Audio Players & Recorders Experts

ocgordy

Level 1 Expert

2 Answers

woodzowl307

Level 3 Expert

652 Answers

Renee Knafel-Bullock
Renee Knafel-Bullock

Level 2 Expert

288 Answers

Are you a Belkin Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...