Question about Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

37' Dynex LCD flat tv, sound doesnt work on some chanels.

The sound wont work on chanels 28 and 32 and a few more, but the sound works just fine on our other TV in the bedroom, same chanels. How can I fix this?

Posted by on

  • Barbara Guderjohn Dec 03, 2008

    I wrote in already on the same problem on the sound but I noticed that my clock says 2000/01/05 and definitely not the right time. and my MTS/SAP button doesn't do anything..  I have the Dynex 32" DX-LCD32-09  Do you know whats wrong

  • outdoordecor Dec 31, 2008

    i have the same problem but only when using the HDMI cable input!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 76 Answers

There are few sound settings on most tv's the most common is D/K and B/G the one that you want is B/G it should be under tuning or sound settings.

If you have any questions please dont hesitate to ask

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Polaroid 37 in LCD TV


combination of loss of your power supply and blown resistors take it to a shop

Aug 30, 2008 | Polaroid FLM-3734B 37 in. LCD HDTV

2 Answers

My 55" Dynex lcd TV


take it back.......could be the power supply board....
cheers

Apr 17, 2011 | Dynex Flat Panel Televisions

1 Answer

Two days ago my tv stop showing pictures but I can swicth chanels, iIcan hear sound but can not see anything. Can you tell me why and should i do?


Now tv turn on,the picture flashes a few sec. than picture dies and only have sound left?Yes,than the tv have 1 or 2 long boards,that are call the LCD inverter boards are dead.These long 1 or 2 LCD inverter boards job are to provide a backlight to the LCD screen panel to produce a picture.Tries websites like Shopjimmy.com,Ebay.com to buy those refurbishes 1 or 2 long LCD inverter boards for the replacement.

Mar 28, 2011 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

I just bought a Dynex LCD TV. It seems to work


Suggestion: This TV is new and part/labor are covered by the Manufacture Warranty. Contact Bestbuy for service options. It sounds like you have a panel problem. I hope this was helpful, best wishes.

Jul 13, 2010 | Flat Panel Televisions

1 Answer

My insignia 37 inch tv


Press menu and use the up or down arrows to find the audio section adjustments. Press the right arrow and again use the up and down arrows to find tv speakers, Press the right arrow to either turn on tv speaker or turn them off ( This is used only if you are using the output signal from you tv in to you stereo input to have surround sound.) Turn them on to listen to sound from the television speakers only. If this does not solve your problem, Press the mute button on you remote control to release the mute function. If all this does not work the telephone number for Insignia is 1-877-467-4289. Talk to them about you problem and see if your television needs some type of service to restore the sound. Hope This helps you with your problem.

Mar 19, 2009 | Insignia 37" LCD Flat-Panel HDTV

2 Answers

There is no sound on only one channel


go into the menue, hit setup, hit program chanels, or auto program, and let it program again, if that chanel still has no sound, then it is in the signal and not the tv, the tv cand single out 1 chanel and mess it up, the tv dont know the diferance between one channel or the next

Jan 10, 2009 | Polaroid FLM-3734B 37 in. LCD HDTV

1 Answer

37" Dynex TV won't turn on


TV IS 2 YEARS OLD SAME PROBLEM AS ABOVE

Jan 04, 2009 | Dynex DX-LCD37 TV

1 Answer

Polaroid 37 in LCD TV


There is not a good solution. If you read about the Polaroid 37" LCD HDTV, you have a problem and it's the same one that many of us have. According to Polaroid's service center, the control box needs to be replaced. Polaroid does not stand by this product. The company gives you a lot of lip service about how many they sell and how few problems they have - they're lying. The TV's should be recalled and I'd suggest you join many of us to demand it. Write BBB, write the company where you bought the TV, write any consumer group you can think of - Polaroid TV's are junk. Sorry you've got one. Sounded like a good deal and Polaroid used to manufacture quality - no more.

Mar 24, 2008 | Polaroid FLM-3734B 37 in. LCD HDTV

Not finding what you are looking for?
Dynex 32 in. LCD Flat-Panel HDTV Logo

Related Topics:

694 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Dynex Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...