Question about Intel SS4000-E (SS4000ENA)

3 Answers

Active Directory authentication problem

After changing the authentication mode to 'Active Directory authentication' server is downloading the list of users correctly. When I try to explore shared resources server is requesting authorization even if I am logged on the workstation. I don't get access to the system when I enter proper login and password again. Here are the screens: 1. 2. 3. Jacek

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers
Re: Active Directory authentication problem

* see netlogon service is running on the server * verify the srv record on the server ( ) *see all authentication on the DC *check the event viewer if any error is occured *veryfy the DC thanks Arun

Posted on Jul 21, 2007

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers
Re: Active Directory authentication problem

The SRV record is a Domain Name System (DNS) resource record that is used to identify computers that host specific services. SRV resource records are used to locate domain controllers for Active Directory. To verify SRV locator resource records for a domain controller, use one of the following methods.

Posted on Oct 20, 2011

Re: Active Directory authentication problem


Posted on Jul 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hyudai A7HD password reset

Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
Windows Advanced Options Menu
Please select an option:
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode
Start Windows Normally
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice
select safe mode with command prompt
Click start run type cmd press Enter
black screen should open DOS mode
this will vary depending on your operating system
type in net user username
For eg. If you want to change administrator password , type net user Administrator
It will prompt you to enter the new password.
Enter the new password and the password is changed
if this fails you will need to
Select safe mode with networking to download
you could download all of these or just one save them to a usb drive for later use if one fails to remove the password
Windows Password Recovery Basic
A CMOS BIOS password recovery tool
Editors note: This tool should only be used by experienced computer users.
Please see the enclosed read me if you would like to run it from Windows.
Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus. Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.
Lazesoft Recover My Password Home Edition is a very easy to use Windows password recovery freeware

Oct 03, 2013 | Network Storage Systems

1 Answer

My sofware disc to xycel nsa 210 has dissappeared and now now I do not where to dto download software for needed reistalment

Good Day b_g_a_son!

You can download the software driver from ZyXEL website.

Go to

You can select the right version for your system from the list.

You can comeback later and give my answer a positive ratings.
Thank you for asking Fixya.

Jun 11, 2011 | Zyxel NSA210 2000 GB Network Storage...

1 Answer

I have a FIA POPNETSERVER 4600 with no Software or Docs HELP!!!

The IP-address probably is provided by a DHCP-server on your network. Login to that DHCP-server, and look at the list of "active" clients, i.e., computers that have obtained an IP-address from the DHCP-server. One of the IP-addresses should be allocated to your FIA box.

Rather than "flatten-and-rebuild", you probably should investigate new software and new hardware to replace it, *BEFORE* it "dies", forcing you into a "panic-repair" situation, i.e., you need a "BCP" (Business Continuation Plan) which proactively addresses the non-availability of your "unmanageable" server.

Apr 08, 2010 | FIA Storage Systems Group POPnetserver...

1 Answer

How do I configure it?

Use its ip address or its snap# to browse into it using Internet Explorer ( http://snap30123 ).The default log in is administrator and no password.
If the password is changed, hold down the reset button for 15 seconds and it shoud reset to default.

Jan 25, 2010 | Quantum Snap Server 4000 (5325301085) 30...

2 Answers

How to manually uninstall MioNet. Easy to answer!

Target is "C:\Program Files\MioNet\ARPMio.exe". There are no command line arguments. "Start in" directory is C:\Program Files\MioNet .

Nov 14, 2009 | Western Digital My Book World Edition 1TB...

1 Answer

How to setup PLDT DSL with Netgear DGN2000

Hi, Follow the below steps to configure the router:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser(Internet Explorer or Mozilla Firefox).
4. Access the router (usually
5. Login to the router (Username = admin Password = password unless you have changed it).
6. Click 'setup wizard'(at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoE Detected" and then click next.
9. Enter the login and Password of ISP click apply.
10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.
14. Open up another browser window and try to access internet.
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Oct 09, 2009 | NetGear Network Storage Systems

1 Answer

Disjoin SS4000-E from active directory

If a computer is a member of a domain you need to logon using the local administrator account to change the name.

Another method, which takes a little more time is to remove it from the domain, rename it and then add it back.

Remember to restart after each change.
You may also have to go into DNS and WINS and make sure that the old name is removed and the new name is associated with the IP address.

If this helps please vote for my solution.

Aug 29, 2008 | Intel SS4000-E (SS4000ENA)

1 Answer

Can´t CONNET to AD

You have to make sure that the clock of your NAS is synchronized with the ActiveDirectory. Configure your NAS to use NTP. This should be under the clock configuration screen. Enter the IP address of your domain controller(s) as the NTP server address.

Also, it would be a good idea to make sure that you domain controllers are synchronized with a root time source (on the Internet). In order to do that, run the following command on all you DCs.

C:\>net time /

Of course, your DCs must be able to access the internet on port UDP 123.

Judging by your email address, you seems to be located in Brasil. If you are not in Brasil, you may look for another NTP server

Feb 02, 2008 | Intel SS4000-E (SS4000ENA)

1 Answer

User access

what version of vista are you using, this is a very important piece of information, vista home flavors are not very network friendly,I recommend that you keep using XP until a few service packs are out for vista. If your using ultimate then something else would be wrong, possibly a setting on the vista box, Im not real sure how vista's authentication works but if they changed it enough then it might require a compatiblity mode or something in order to authenticate with 2000/xp, but then again i could be wrong and vista might authenticate exactly the same way as 2000/xp, try setting an xp box up as a server and see if the vista box can authenticate with it, if so then maybe 2000 is the problem, sorry i couldnt give an actual solution but im still new to vista myself and dont have any pc's that will run it, my good computers are all macs.

Apr 15, 2007 | Sony StorStation FSV-E1 80 GB Network Hard...

Not finding what you are looking for?
Intel SS4000-E (SS4000ENA) Logo

1,435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Network Storage Systems Experts

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Brad Brown

Level 3 Expert

13362 Answers

Daily Mehdi
Daily Mehdi

Level 2 Expert

48 Answers

Are you an Intel Network Storage System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides