Question about Proview PA-32JK1A 32 in. LCD Television

1 Answer

I have a Proview TV that we just bought from Rent A Center and when we connect our cable to the TV it tells us to scan the channels. We did this and still we get a blank blue screen that says No Signal. What do I do?

Posted by on

  • Anonymous Jan 02, 2009

    Cannot get all channels even though I have cable

  • katscan111 Feb 13, 2009

    I have the same problem. I tried scanning all four settings in the Tuner Mode. None worked. Any other solutions out there???

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try this as your model is basically the same as mine.

Push Menu on your remote.
Then a small screen comes up.
Using your left right arrows move left to set up.
Scroll down to tuner mode and again using left right arrows, there are 4 setting you can choose. Once the setting you choose is showing then scroll up to Channel Searching and hit OK on your remote. This will scan all the channels Digital and Analog.

Depending on which of the 4 setting you picked on TUNER MODE you may have to do this again in the next mode to see which will get the most channels on your TV.

I hope this is helpful; Ken, Attica, NY

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get my TV to do a digital scan to detect channels?


Where are the digital channels coming from! Cable, satellite, box or TV?

Dec 31, 2015 | Proview Televison & Video

1 Answer

I just bought a progressive scan Tv and can't get it to srtup to any channel it just stays on channel 3 mono


Progressive scan has nothing to do with your tuning, it refers to the scan lines in laying the picture on the screen...ie. progressive scan versus interlaced scan.
to program TV channels you will need to go into the menu to do that either automatically or manually. If you have a cable or satelite box connected to unit, that may explain why it programs to only ch 3.
If using cable or satelite box I highly recommend use of Either HDMI cable or composite cables.

Apr 07, 2014 | Televison & Video

1 Answer

Connecting to basic cable


I just bought an RCA TV and was ready to throw it out the window. Spent 2 days trying to set it up asking RCA 5 times for help and went online and still couldn't solve my problem.

If you are connecting your TV to a cable box, your channels are already there so you do not have to scan for channels.

Dec 25, 2013 | Mitsubishi LT-46144 46 in. LCD HDTV

1 Answer

I am setting up my proview pa-32jk1sa, for the first time. we have dish network, but all my tv says is please scan channels. i have my coaxial plugged into hdtv, and also went to settings for hdtv and set...


chances are that your reciever is outputting conventional NTSC .. not high def ... so you would scan for standard channels not hdtv .. if chanel selection is done by the satelite reciever then the scan will only find one channel 3 or 4 usually (or better yet you can use Svideo or component oututs if it has them .... if the receiver is a block converter that uses the tv to tune channels then you should get more channels detected ..

Jun 24, 2010 | Proview PA-32JK1A 32 in. LCD Television

1 Answer

I have a RCA HDTV model# R52WH74. The cable company said all I needed was a digital box from them and a connector cable which I have. However the connector cable that fits into the digital box does not...


The cable company is always encouraging customers to rent cable boxes. It is hard to tell if a HDTV has a Quadrature Amplitude Modulation feature unless you ask at the time of purchase. Now the only thing to find out is to have it scan. Your TV has 2 RF inputs. You can choose one to hook up directly from cable source. Make sure to set up the right one for the input that you connect then let it scan. You will see something like channel 7, channel 7.1.... After that you have to make notes of what number is for which channel since it doesn't list out as what you have with a cable box. That is the inconvenience to watch without a cable box, but if you know what channel already then you can go straight to it without searching from remote.
I find out that cable box renting is a rip off. Another option is buy a new TiVo HD 20GB is selling now for 249.99 at Best to replace cable box legally and have all features just like cable box plus many more. However you have to pay TIVO service in order to record program. It still about the cost, but at least you know there is an option. Hope this can help.

Dec 29, 2009 | Televison & Video

1 Answer

Can't get digital channels on 37


Bob,

Are you certain you've connectet the antenna coaxial cable correctly?

There's 2 of them on this TV, one for digital and one for analog/cable connections, make sure you're connected to the correct input for digital TV.

If you're certain you've got it connected correctly then your problem is going to most likely be in the TV tuner board inside the TV.

Good Luck!

Ren

Jun 03, 2009 | Akai LCT3701AD 37 in. LCD Television

1 Answer

I have the tv and i have the cable channels but they r fuzzy


Do you have a vcr/dvd player connected to this tv? Make sure it is off. Do you have a cable box? Make sure your TV is on channel 3 or 4 and the same for the cable/satelitte box. Make sure you have good grounds on your cables and rca jacks. Should be easy to correct this.

May 01, 2009 | Proview PA-32JK1A 32 in. LCD Television

1 Answer

Proview 3200 HD TV


as you are using the ch3 , have you previously scanned and locked in all the channels for cable,

Apr 25, 2008 | Proview PL913S 19" Flat Panel LCD Monitor

Not finding what you are looking for?
Proview PA-32JK1A 32 in. LCD Television Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Televison & Video Experts

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Tony

Level 3 Expert

2598 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Proview Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...