Question about HP Pavilion dv1000 Notebook

1 Answer

I/O device error

While trying to use my mp3 player (rio audio se510) through a usb port i receive an error message: I/O device error. my mouse still works and the mp3 player is detected by my laptop (HP Pavilion dv1000) but it is not detected in the program it is setup to use. It shows up in "my computer" but when i try to open the file i receive the error message. can anyone please help me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

Try getting at your MP3 player in another computer and getting at your files.

This will rule out a problem with the MP3 player. My sister's MP3 player was damaged in a similar way because of faulty flash memory.

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Why won't the right USB port recognize when I plug in my mouse?


Your USB ports on your computer are plug and play. If you have issues with your USB port, it is port related, driver related or device related. The following solutions will help you identify the problem to resolve your USB port issues.
To Identify a Working USB Port
Begin troubleshooting your USB ports by checking Device Manager to see if your USB ports or hubs are working properly.
  1. Click the Start button. ClickControl Panel.
  2. ClickSystem and Maintenance.
  3. ClickDevice Manager.
  4. Double-clickUniversal Serial Bus controllersand check to see if all your USB ports, hubs and controllers are functioning correctly. Any devices not functioning will have a yellow exclamation mark in front of them.
  5. If Device Manager shows any USB ports, hubs or controllers are not functioning, check for updated drivers.

To Update the USB Port Driver

An out-of-date BIOS driver can create issues with your system recognizing the USB port.
  • Watch a Video on Steps to Update Bios on Your Computer.
    1. When the update process is complete, your computer will restart again to load the operating system with the new driver version installed.

Sep 16, 2014 | Dell Inspiron PC Laptops

2 Answers

My Acer laptop ASPIRE 5738 does not recognise USB Mouse, previously it is working fine. But if I attach other USB device it is working. It is only problem with USB mouse.


Do you have another USB mouse around that you can test with? It sounds like the USB port on your laptop is fine but the mouse is the issue.
If you can find a spare around and test or alternatively you could try to bring the laptop to a friends house and borrow their USB mouse temporarily.
My guess is that the other mouse will work fine. How many USB ports does this computer have? You can also try changing which port you plug it in to.

May 12, 2011 | Acer Aspire One PC Notebook

1 Answer

Plz help me i want connect wire less keybroad and mouse thnksvjtawale2gmail.com


There are 4 possible ways in my awareness...
Method 1: Resynchronize your device with the receiver To resynchronize the mouse or the keyboard with the receiver, follow these steps. Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put any other wireless keyboards and mouse at least 6 feet away.
  1. Press the button on the receiver, and then verify that the light on the receiver starts to blink.

    Note Some newer Microsoft devices are permanently bound to their receiver and cannot be reset. If your device does not have a button, skip to Method 2.
  2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen. Otherwise, go to the next step.
  3. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
  4. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 4 again.
  5. For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it is depressed.
The following example shows the buttons to push to synchronize a wireless hardware device:

Receiver Bottom of the mouse: The connect channel button Different kind of receiver Collapse this imageExpand this image 838398_receiver.jpg Collapse this imageExpand this image 838398_mouse_bottom.jpg Collapse this imageExpand this image 838398_portable_receiver.jpg Method 2: Try different portsTo determine whether the problem is related to the ports on the computer, use only the two cables that are included with the wireless desktop receiver, or the single cable that is included with a mouse. USB keyboard and USB mouseIf the USB cable is currently connected to a USB hub, disconnect the device from the hub, and then connect it to a USB port on the computer. If your device is already connected to a USB port on the computer, try to connect the device to a different USB port if one is available.

Note Only one USB connection to the computer is required, even if your device has two USB plugs. If the problem persists, disconnect other USB devices and connect only the USB plug from the receiver to a USB port on the computer. PS/2 devices Warning If you have to change a PS/2 connection, shut off the computer, make the changes, and then restart the computer. Do not plug a PS/2 device into the PS/2 port while the computer is running.If your devices are connected to PS/2 ports on the computer, verify that you have the following configurations:
  • Verify that the USB plug for your mouse is connected to the green USB-to-PS/2 adapter and that this adapter is plugged in the mouse PS/2 port on the computer. The mouse PS/2 port on the computer may also be green. If you are not sure which PS/2 port is the mouse PS/2 port, see the documentation that was included with the computer.
  • Verify that the USB plug for the keyboard is connected to the purple USB-to-PS/2 adapter and that this adapter is plugged in the keyboard PS/2 port on the computer. The keyboard PS/2 port on the computer may also be purple. If you are not sure which PS/2 port is the keyboard PS/2 port, see the documentation that was included with the computer.
If you have to change your configuration, shut down the computer, make the changes, and then restart the computer. If your mouse or keyboard has both USB and PS/2 connections, try using the other connection. PS/2 keyboard and USB mouseIf you are using a wireless mouse with a USB connector and a PS/2 keyboard, verify that the USB mouse is plugged in a USB port on the computer and that the purple keyboard PS/2 plug is connected to the purple PS/2 port on the computer. If you have to change the PS/2 connection, shut off the computer, make the changes, and then restart the computer. Method 3: Reinsert the batteries or install fresh batteriesBoth the wireless keyboard and the wireless mouse rely on AA alkaline batteries for power. Remove the batteries, and then insert them again. If the problem persists, install a fresh set of batteries in the device that you are having problems with. Method 4: Check for interferenceItems such as wireless routers, radios, cell phones, desktop fans, fluorescent lights, and large metal objects like computer cases and metal furniture may interfere with the signal of the keyboard. Try to keep such items away from the keyboard, and check the behavior of the keyboard.

Do not put the mouse or the receiver near any electrical devices, especially transmitters such as cordless or cellular telephones or other wireless mouse devices or receivers. A distance of at least 8 to 12 inches is recommended. Do not put the mouse or the receiver on metallic surfaces or objects, especially long metallic rails or cables. We recommend that you keep the mouse and the keyboard a minimum of 3 feet from metallic objects.

Nov 21, 2010 | PC Laptops

2 Answers

USB device not recognized


This solution worked for me when I got the USB device not recognized message:
http://www.infobarrel.com/USB_Port_Repair
It can be quite frustrating. I've heard that older computers are more likely to have the USB device not recognized message.

May 31, 2009 | Dell Inspiron 6400 Notebook

5 Answers

CL51-15 USB Port Problem


I have the same problem with the USB's not working. Suppliers say Motherboard problem. solved it by purchasing a PCMCIA to USB port. at least i now have 2 USB ports. you could probably get one with 3 ports.

Kevin S.A.

Sep 26, 2008 | ASI CL51-15 Notebook

5 Answers

USB ports not working


I think the root issue of usb ports not working is a problem with your USB port's drivers no longer communicating with your computer. This often occurs when you install an update to your computer's operating system.

Sep 02, 2008 | Acer Aspire 5315 Notebook

1 Answer

Aspire 3610 USB ports


I think you might have a loose cononection for the data ports. Try putting a little bit of force on the usb device. Up, down left right. NOT ALOT. If it starts working when force is used, i tihnk you should try to take it apart and resolder the connections. If it dosen't work, uninstalling the driver and installing.

Jun 01, 2008 | Acer Aspire 3680 Laptop

1 Answer

Mouse not being recognized


Hello Narin,

Check the USB properties if there are some errors at Control Panel> System> Device Manager> USB device. Install the compliment CD driver for USB devices. Also try placing the mouse into other USB port(s). Update your OS as necessary for device patches and if there's a need to install driver for the said mouse please install then.. Hope thos helps.

Best regards,
Rosener Guyano

Feb 14, 2008 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

My sony VGN N220E does not detect external devices


Try reinstalling your usb ports.

1. goto desktop, right click on my computer and press manage.
2. goto the device manager, find the usb devices / ports.
3. Make sure you are useing a ps2 mouse / keyboard since if your mouse/keyboard is connected to usb they will stop working untill your pc is restarted and the devices are reinstalled.
4. Uninstall all usb devices.
5. after all usb devices are uninstalled reboot the pc.

If the problem is with your drivers ( your pc detects the mp3 player but no drivers found) Download the newest drivers for your product and operateing system from the vendors website.

Nov 30, 2007 | PC Laptops

2 Answers

Power Surge error message


Hello,

 

 

I guess that this could be your error message:

"Error message when you wake up a Windows XP-based computer from hibernation or from standby: "Power Surge on Hub Port: A USB Device has exceeded the power limits of its hub port"

 

If it is the case, please try below solution:

 

SYMPTOMS

 

When you wake up a Microsoft Windows XP-based computer from hibernation or from standby, you may receive the following error message:

 

Power Surge on Hub Port: A USB Device has exceeded the power limits of its hub port. This error message is displayed even if there are no USB devices connected to the computer.   WORKAROUND loadTOCNode(1, 'workaround'); To work around this issue, disable the USB 2.0-enhanced host controller.

Note When you disable the USB 2.0-enhanced host controller, you lose USB 2.0 functionality. That is, you revert to USB 1.1 functionality.

To disable the USB 2.0-enhanced host controller, follow these steps: 1. Right-click My Computer, and then click Manage. 2. Under Computer Management (Local), click Device Manager. 3. In the Device Manager pane, expand Universal Serial Bus controllers. 4. Right-click the USB 2.0-enhanced host controller, and then click Disable.

Note The name of the USB 2.0-enhanced host controller may vary. 5. When you receive the confirmation message, click Yes. 6.

Close Device Manager.

 

 

I hope that this should resolve the issue for you.

 

 

Please let me know the result. 

 

you can mail me at thumuvikram@rediffmail.com for any further assistance on this issue.

 

I'll be glad to help you.

Oct 18, 2007 | IBM ThinkPad T43 Notebook

Not finding what you are looking for?
HP Pavilion dv1000 Notebook Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Laptops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a HP PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...