Question about NetGear WGT624 Wireless Router

1 Answer

I can't remember exactly what my password is.

Tried to get a second lap top on line. It asked for my password; never had to use this before because I always used just my one lap top.
Purchased WGR614 July, 2008.
Had help connecting with agent #1581,
case #7652138.
How may I check to see what my password is?
Will I have to redesignate a new password?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Try this:

open up a web browser then type in one of the following addresses...just the numbers ie no "www." an ".com"

192.168.1.1 (this is probably it)
192.168.2.1
192.168.0.1

once you get to the routers page, just go into admin mode. You will be prompted for a user name(=admin) and a password(="password"). that should allow you to see what you have your password set as. Hope this helps.

If this helps please rate this as a fixya or helpful.

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wireless router is locked when i try to open it with my lap top it asked for a password, I dont remember doing a password. Now what?


Reset your router. there's usually a reset button at the back of most routers.
Hope that gives you an idea...

Jul 08, 2011 | Routers

1 Answer

I have a new lap top which is recognising the wireless network and then asking for a network security key. How do I find this?


The network security key is essentially a password that was setup to control access to your network. Presumably, when you set it up you gave it a password that you could remember, but not so obvious that people could easily guess. If you've forgotten or lost the password, you can reset the router by using a paperclip and holding the reset button for about 10-15 seconds. Once you reset the router, it will be restored to its original factory defaults and you can then setup again your wireless networking.

Jun 20, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I need password for my netgear wgr614v7 to hook up lap top the lap top is an dell latitude


the default setting is open (no password required) if someone else changed it in the router you need to ask the person who changed it or reset your router and start over.

Feb 05, 2010 | NetGear WGR614 Wireless Router

1 Answer

Router locked. Cant remember the password.. User "root"


Hi,
The only solution for u to login in to the router is to reset the router.

1.If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.

2.To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.

3.Wait about 30 seconds to access the router.

4The default IP address is 192.168.1.1. When logging in, type in the default User Name “admin,” and the
default Password “admin” then click on the OK button to access the web-based manager.

Regards,
Ayyasam

May 29, 2009 | Buffalo Technology WHR-G54S Wireless...

1 Answer

Connecting my new laptop to the internet


There is a wirless icon in the botom right corner of the screen right click it and say view all wirless networks. lock for the one you own say conect it might ask for a WEP password which is located on the botom of the router that is if you did not change it from the defult.

Jan 03, 2009 | Zyxel Prestige P-330W Wireless Router...

1 Answer

Can't remember pass word to get on and we have a new lap top and its asking for a password.


hi welcome to fixya! if your talking about your internet router, the common username and password which the manufacturer usually used is...
username: admin
password: admin

and if it is about your laptop... well... better seeing that person in whom you've bought that laptop and ask the password... or ask for assistance at any service center near you. I'm sure they would love to help you. have a nice day!

Dec 25, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Cannot install D-Link router


1. check your wireless adapter TCP/IP settings if its set into "Obtain as IP address Automatically".
2. if the settings is set as Automatic and your not getting IP address then select "Use the following IP Address"
3. use IP address followed to your router address like if192.168.0.1 in router type 192.168.0.2 or192.168.0.3 just check the next address IP in your network.
4. after typing subnet IP will automatically set
5. type the router IP address as your default gateway
6. click OK to save your new settings

Hope this will help

Nov 24, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Cannot install D-Link router


You may try typing admin on the username field. Just leave the password field empty.

Once you're in the setup page, click on WIRELESS tab which on the left side of the page. On the Wireless page, you will see the wireless settings set in the router. You may also enable the wireless security on that page if there is not security enabled yet.

Please check this for your reference http://support.dlink.com/Emulators/di524/h_wireless.html

Hope this helps!

Nov 12, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

2 Answers

Netgear router set up


Hi pooh -The default username is admin and the password is either password or 1234. Try these before resetting the router. If these don't work and you can't remember what you had them at before, you'll have to reset the router to factory defaults.
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
  10. You're in.
If this answers your question PLEASE rate this as fixed. Otherwise please don't rate. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

Jeff

May 18, 2008 | NetGear DG834G Router

Not finding what you are looking for?
NetGear WGT624 Wireless Router Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...