Question about Kenwood Car Audio & Video

1 Answer

I need to install a kenwood cd player into my 2001 ford explorer step by step

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Goto the auto parts store and purchase a pair of stereo keys, fascia adaptor and wiring harness (you may need to get fascia and harness from a car audio store or circuit city.)
Then use the stereo keys to remove the factory stereo. Push them into the small holes on the front of the stereo push them slightly outwards and pull to release the stereo. Unplug all the connectors from back keeping track of where they fall.
Insert wiring harness into the stock wiring
attach fascia in regards to its packaged instructions.
Place cage from new stereo into the hole in the dash using the tabs on cage to secure it,
Attach stereo to other end of new harness along with aerial (may need adaptor for this also depending on the new head unit.)
Insert stereo into new cage and voila nice new stereo.

Posted on Nov 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a radio wiring diagram


whats the nake and model of the cd player an the make and model of the car of instalation.

Oct 14, 2012 | 1995 Dodge Dakota

1 Answer

What's your problem?I drive a 1999 ford crown victoria. This unit did not come with a a wire harness.. so how do i install my Kenwood KDC-138 FM / AM Receiver correctly


you need to go to any appliance store that cells cd players and buy a wire harness that connects to the cd players wires its called a ford wire harness, the people at the store should know where and what it is.

Oct 17, 2011 | Kenwood KDC-138 FM / AM Receiver

1 Answer

Installin kenwood stereo on 2001 ford f250


HI and thank you for using fixya:
Put cables together and

Aug 20, 2010 | Kenwood KDC-MP228 CD Player

1 Answer

I need help wiring a kenwood cd player into a 1991 ford explorer


Here is a link for your explorer

http://www.installdr.com/Harnesses/Ford-Wiring.pdf

and there should be a diagram on the back of the kenwood deck which would explain the deck side. if not your main power should be yellow = Constant 12V for clock
Red = Ignition 12V switch turn on the deck
Black = Ground
blue purple green white= for speakers

solid color = to positive on speakers
color with black stripe = negative on speakers

I would solder and heatshrink all connections Good luck

http://www.installdr.com/Harnesses/Ford-Wiring.pdf

Oct 27, 2009 | 1991 Ford Explorer

1 Answer

Stereo installment 2000 ford mustang


can you please describe your problem more in detail? I have the same car and also have a kenwood cd player installed.. what wires are u looking for?

Mar 31, 2009 | 2000 Ford Mustang

1 Answer

Installing kenwood cd player in EF ford falcon


this is not a sales pitch but i purchased the correct patch harnass from pmr, it should be available at any good sterio store for about $10

Mar 17, 2009 | Kenwood KDC-MP4028 CD Player

1 Answer

I have a factory cd player in my 2001 ford explorer sport. usually i can put the cd in half way and it would automatically take it in. the cd player doesnt do that anymore. how do i fix that?


sorry but i dont think you can. it will be that your cd player is probably on its way out. does it eject cd's alot slower than what it used to? if it does this is definately the case. the little motor that does this will be failing, if it ejects at the same rate still i think the sensor that determines when to automatically pull the cd in will be shot

Dec 31, 2008 | 2003 Ford Explorer

1 Answer

Kenwood KDC-X589 seems like the CD player doesn't put out sound


you have to change the cd read setting it might got set to cd read 2 it needs to be cd read 1 in standby mode press menu button scroll through with track button till you see cd read and set it to cd read 1 if not in standby mode try in cd mode same steps

Jul 03, 2008 | Kenwood KDC-X589 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...