Question about Car Audio & Video

1 Answer

Connecting Bluetooth to Kenwood KDC X590

HI,what sets/procedures and accessories do i need to connect Bluetooh from my Cell phone, to car Deck. Also, how do i do it?

thanks RB81

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

You need a kenwood kca-bt200 which is a bluetooth plugin for your head unit. when you have installed this here is a check to see if its recognised.
1 Select the STANDBY
Press the [SRC] button.
Select the "STANDBY" display.   2 Enter Menu mode
D-1:Press the [MENU] button for at least 1 second.
D-2:Press the [MENU] button.
D-3:Press the [FNC] button.Turn the Control knob to select "MENU", and then press the Control knob.
"MENU" is displayed.   3 Select Bluetooth device selection mode
Push the Control knob towards up or down.
Select the "Phone Selection"/"PHONE SEL"/"PHN-SEL" display.   4 Enter the selected Bluetooth device selection mode
Press the Control knob for at least 1 second.   5 Select the KCA-BT200 Firmware
Push the Control knob towards up or down.
Select the "BT200 FW ***" display.   6 Exit the Bluetooth device selection mode
D-1/D-2:Press the [MENU] button.
D-3:Press the [FNC] button


after this you should be able to pair from the headunits menu

Posted on Nov 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change time


Hi here is user manual for your Kenwood KDC-X590.
Please download and review your manual via link below.

Kenwood KDC-590 User Manual

Good luck!

Nov 18, 2013 | Kenwood KDC-X590 CD Player

2 Answers

My kenwood KDC-X590 car stereo has no illumination but radio and cd player works. Is something burned out? HELP!!


there are about 8 - 10 surface mount resistors inside of the deck that need to be resoldered. They are on the front right of the board with the face toward you.

Jul 29, 2012 | Kenwood KDC-X590 CD Player

1 Answer

I can't get my Kenwood KDC-X590 out of demo mode. Help!


Press the [MENU] button for at least one second. Push the control knob toward [AM] or [FM] to select "DEMO." Press the control knob for two seconds to alternate between "DEMO ON" and "DEMO OFF."

If you need a manual you may download a copy here.

Jun 15, 2012 | Kenwood KDC-X590 CD Player

1 Answer

I have protect displaying on my stereo


This is most likely due to speaker, speaker wiring, or faulty headunit problems. To troubleshoot this you need to slide the deck out and disconnect only the speaker connections. Turn on the stereo and if it still says "protect" then it's most likely a faulty deck. Otherwise, repeat the procedure of plugging in one set of speakers at a time until the "protect" comes back on. This is now your faulty speaker line. This could be the wiring or the speaker causing the problem so you could try swapping a speaker that you know works. If the problem persists you'll have to run new wire in place of the faulty line.

May 04, 2011 | Kenwood KDC-3031A CD Player

2 Answers

I bought the deh-2200ub to replace an infinity stereo in a 2005 kia optima. There's less wires on the pioneer, which I just taped off, I have no sound. AARRRGGGGGG!!!! help


Hi, the wires should be connected as indicated below. Please let me know if you have questions, and thanks for using FixYa.

2005 Kia Optima Car Stereo Wiring Schematic Pioneer wire color
Car Radio Battery Constant 12v+ Wire: Orange yellow
Car Radio Accessory Switched 12v+ Wire: Yellow red
Car Radio Ground Wire: Black/White black
Car Radio Illumination Wire: Brown/White none
Car Stereo Dimmer Wire: Gray none
Car Stereo Antenna Trigger Wire: Gray blue/white
Car Stereo Amp Trigger Wire: Green blue/white (same as above)
Left Front Speaker Positive Wire (+): Yellow white
Left Front Speaker Negative Wire (-): Black white/black
Right Front Speaker Positive Wire (+): Blue gray
Right Front Speaker Negative Wire (-): Red gray/black
Left Rear Speaker Positive Wire (+): White green
Left Rear Speaker Negative Wire (-): Brown green/black
Right Rear Speaker Positive Wire (+): Orange violet
Right Rear Speaker Negative Wire (-): Green violet black

Apr 10, 2011 | Pioneer DEH-P4000UB CD Player

1 Answer

Problema con mi kenwood kdc-x590 me pide un codigo de 4 digitos como puedo desbloquearlo ayuda porfavor???


halo you will need to contact kenwood give them the model and serial number they will give you the 4 digit code

Mar 26, 2011 | Kenwood KDC-X590 CD Player

1 Answer

How do I set this deck to use my iphone to make calls trough the stereo?


You will need to purchase the KCA-BT200 bluetooth unit and connect it to your head unit. Then you can even connect up to five bluetooth phones. dreamsystems.

Feb 21, 2011 | Kenwood KDC-MP2035 CD Player

1 Answer

Display screen not working


Sounds like you might have a bad connection where the faceplate connects to the unit, or the faceplate is bad.

May 21, 2010 | Kenwood KDC-X590 CD Player

1 Answer

How to set Pioneer DEH-P440 AUX input ON


hit the 'source' button.

you might have to turn aux on first, in that case, turn the deck off, hold down.... fuction then turn it on.

May 01, 2010 | Pioneer DEH-P440 CD Player

1 Answer

Turning on the bluetooth


Most of the autoradio bluetooh is working with the emulation of the phone.
Then you will have to make the research of the peripheral of the autoradio, normaly it should appear on the screen of your phone.

Sometimes, with products you have to activate the bluetooth to be pair.

Into the settings, you should normaly find the it.

But precise the product you have to be able to sort it out.

Feb 20, 2010 | JVC KD-G430 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...