Question about Canon W8200PG InkJet Printer

1 Answer

Need to pack up amd move W8200

Hi friends, I have a Canon W8200 which I need to pack and crate up to transport internationally. Originally the printer was installed by a technician but because of the remoteness of the printer I need to package it myself. As the printer needs to be raised at one end to get through a narrow doorway what other precautions besides using the menu "move printer" or perhaps remove the ink cartridges do I need to do? Is there a ink overflow tank for surplus ink? Obviously I don't have any of the riginal packing pieces such as any cable brackets etc Any help would be very much appreciated chris

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: need to pack up amd move W8200

Canon have a specific protocol to be followed to prepare the printer for transport. It is shown in a pdf file I downloaded from
the file is in the Guides section

Posted on Dec 13, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

New canon 6220 printer will not power up has error light on

Try to reset the Ink carthridges and check for any hidden packing material or tape. Often the manufacturer will tape down parts that can become loose in transport. They will restrict the free movement of print heads and other moving parts.

Jan 18, 2015 | Canon Printers & Copiers

1 Answer

Access service mode w8200

keep trying man you'll get it please keep trying

Aug 17, 2013 | Canon imagePROGRAF W8200 InkJet Printer

1 Answer

I have a Canon W8200 and i get the error code"

Try this:
1) As an error (E02802 or E02805 to E02809) is shown on the display, install the correct
combination of printhead and ink tanks according to the error.
2) Perform ink filling*3 following the installation sequence. After filling ink, when "Load Roll
Media" is shown on the display, turn off the power.
3) Turn on the printer while holding down the ONLINE button, ENTER button, CANCEL button,
and PAPER SOURCE button.
4) Check that "Canon W8200" is shown on the display, and then release the buttons. When
printer enters Reset mode for the dye/pigment model setting, all the LEDs on the operation
panel turn on.
5) "TYPE RESET" is shown on the display.
6) Select "YES", and then reset the dye/pigment model setting in the printer.
When reset is selected, the ink drain sequence is executed. It takes approximately 4
minutes for the process to be completed.
7) Check that "Turn Power Off!!" is shown on the display, and then turn off the power.
8) Unplug the power cord from the outlet.
9) Move the carriage, and then takeout the printhead.
10) Replace the following parts
• Ink tube unit : See "Part 5: 5.2.6 Ink tube unit".
• Purge unit : See "Part 5: 5.2.9 Purge unit".
• Ink tank unit : See "Part 5: 5.2.10 Ink tank unit".
11) Turn on the printer, and then continue with the installation operation (from installation of the
printhead). At this time, replace the printhead with a new one*4.

For service manual, You can write me on

Hope that helps!

Jul 29, 2011 | Canon W8200PG InkJet Printer

1 Answer

When I ordered the printer to print anything I hear a strange sound and the paper remains as it is (not withdrawn) to within therefore does not execute the Print command ......................... I hope a...

Did you open the printer and remove the cradle lock and packing. These are shipped with new printers to keep the internal components from moving during transport. Open the front door and make sure all of the packing is removed and the print cartridges are installed correctly.

May 14, 2011 | Printers & Copiers

1 Answer

I cannot find drivers for My W8200. I am using Windows7 64bit

There are no drivers yet for Canon imagePROGRAF W8200 on windows 7

Jan 22, 2011 | Canon imagePROGRAF W8200 InkJet Printer

1 Answer

I have an error on my w8200, on the screen

i have an error on my w8200, on the screen written ERROR E20D01,
what is the code mean?

Jun 04, 2010 | Canon W8200PG InkJet Printer

1 Answer

Canon W8200 error message "Print Head Error" "turn off printer"

There was no response to the question, so we called in a Canon service person who has ordered a replacement print head.

Nov 24, 2009 | Canon imagePROGRAF W8200 InkJet Printer

3 Answers

Error code on canon w8200

Clean the round rod that the print head moves along and also the metal work above where the carrage rollers run.
I wipe mine with a drop of oil after cleaning as error is indicating that the carrige is sticking and not moving at the correct speed.


Mar 19, 2008 | Canon imagePROGRAF W8200 InkJet Printer

2 Answers

Canon imagePROGRAF W8200 InkJet Printer Problem Printhead Error! Turn Power Off!

you need to enter a service mode before the error message pops up. hold down paper source button + online.
that should override the message before it pops up.
go to replace print head selection. or do a clean. it may still be working. let me know if this doesn't work....but at least you can still get past the message now! marty

Oct 27, 2007 | Canon imagePROGRAF W8200 InkJet Printer

Not finding what you are looking for?
Canon W8200PG InkJet Printer Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

93861 Answers

old marine
old marine

Level 3 Expert

1298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides