Attach Bertini Shuttle Pram Toddler seat - Bertini M5 - TS Energy Stroller

Seating configurations are on the baby jogger website and yes you can use 2 both parent facing tried to upload a pic but it wouldn't let me

Hi Gemma
We'd recommend you contact Dorel Australia for assistance.

Hi, you have to remove the bumper bar and the hood, then click the toddler seat into the opening that the hood goes into, once in, you can then refit the hood but you are unable to use the bumper bar with the toddler seat in position.

Hi,

You will need to recline the main seat unit fully (undo the zips on the inside of the seat unit) and attach the toddler seat on top (with two right angled connectors put into the slots where the bumper bar clicks).
With this setting, you will be able to use this for a toddler and newborn.

I hope this helps.

No, the older toddler seats will not fit the newer model strollers. You will need to check the toddler seat and see how it attaches to the pram, there are two different styles.

http://www.bertini.com.au/pages/contact.php

There is their web address. Contact them.

please rate my answer as a fixya!

You can not get a manual any more as they are not made. They are releasing a new seat in Feb 2010. This works in an identical way so I have been told. I have the old seat. It is easy to understand how it is fixed, but I would have a strong man to help, it can be tough.

Step 1 : locate bumper bar and with an alan key undo the two black clips either side that hold it together. Remove bumper bar from pram, Keep the two clips on the pram with the opening facing up.

Step 2 : With your toddler seat you should have another two of these black clips, place these two on the pram in the same way, but as far forward as they will go.

Step 3 : On your seat either side of the black knob that reclines the seat you will find two holes, simply place the seat lined up with the clips, put the screws with the clips threw the clips and the holes in the seat place, put the other side of the screw on and tighten. Thats it seat on.

I went to the Valco site and wrote and email to the Support Team and they emailed me the instructions to collapse the Toddler seat with the pram. The pram now 'squashes' nicely!

i found rain cover on ebay thanks

hi I think I could help I bought a bertini shuttle as well if you stand behind the pram on the right run your hand down the right side of the hood there is a push up lever there mine is grey ok you need to push the grey? lever but also on the left and right there is a black lever you must push up al together hope this helps good luck from debbie