Question about Dryers

1 Answer

Indesit washer dryer will not heat up in dryer mode

Posted by on

  • blonderenne1 Nov 28, 2008

    Found problem with the washer dryer the therma-fuse was blown.

    It was left attached to one connection above the heating coil but I cannot see where to attach the second connection on a new one which I have viewed on the web and am about to order.

    Can you assist please Barry

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

This will probably be one of the thermostats on the element, on some models these have a reset button.

Take the lid off the machine and you will see the heating element, the thermostats are sat on top of it with wires going to them, if they have buttons in the middle press them and if one of them clicks your heat should be restored.

Try this and post back your findings for further assistance if required.

Thank you for using Fixya

Posted on Nov 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Indesit iwde7168 fault code f01 on drying


Indesit F01 is a board/motor fault, as it is happening on dry I would suggest looking at the board again ensuring there are no other blown solders or indeed the repaired solder connecting to another

Apr 07, 2014 | Indesit IWDE7168 Washer Dryer - White

1 Answer

Washer dryer not drying properly


the heating element of you dryer broken already

Feb 03, 2014 | Indesit Washing Machines

1 Answer

Indesit IS60V tumble dryer runs but doesn't heat


Hi,


Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - teresa241964


]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\]\

Apr 19, 2010 | Indesit WA 115 Front Load Washer

1 Answer

WIDL102 indesit washer dryer not working properly


check heater element/ should read about 32ohmns on multimeter if not reading replace,if ok replace stat

Apr 03, 2010 | Indesit W 123 Front Load Washer

1 Answer

Indesit washer dryer, washer is fine, but dryer does not heat up


If you don't hear the fan running then the fan motor has gone bad. If the fan motor is bad then most likely your element has burned out. If you hear the fan motor than probably your element has gone bad..

Jul 29, 2009 | Splendide 2100 Vented Washer-Dryer

1 Answer

Tumble dryer not working


SOUNDS AS THOUGH YOUR HEATER ELEMENT HAS GONE..
IT IS POSSIBLE TO FIX IT YOURSELF BUT VERY COMPLICATED, CALL OUT FROM A REPAIR PERSON IM AFFRAID, COMBI WASHER/DRYERS ARE RENOWNED FOR THIS & ALSO BEARING KITS

May 22, 2009 | Indesit W 123 Front Load Washer

2 Answers

Indesit WDG1095W combined washer/dryer - program wheel stopped


I'm a bit confused you posted under Bosch but you specify Indesit, which is a UK machine. The really bad news is you need to replace the timer. the really really bad news is you can only buy the timers from Indesit, I can't find them anywhere in the US. The really really really bad news is they want 117.99 british pounds for them! plus shipping and handling. Here is a link to the Indesit site where you can purchase one.

http://www.4indesit.co.uk/cgi-bin/product.pl?PID=111846&query=Indesit%20WDG1095WG&model=WDG1095WG&path=52691

May 22, 2009 | Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

No heat on Indesit IS60V tumble dryer


The heater and stats are located at the rear of the m/c behind a removable panel.
you need a meter to test them, more likely to be a stat problem, but again you must test them for continuity.
Plz leave feed back for my solution.
Thanks.

Dec 14, 2008 | Indesit WA 115 Front Load Washer

2 Answers

My indesit widl126s


my washer works fine but the dryer wont heat up or dry the clothes it goes onto dry but all the clothes are still coming out wet and the drum is cold

Apr 01, 2008 | Washing Machines

2 Answers

Indesit washer dryer stops halfway through a wash....


depends on what lights are flashing this is your fault code

Mar 28, 2008 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Dryers Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

69014 Answers

Brad Brown

Level 3 Expert

15000 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...