Question about Canon PIXMA iP1600 Printer

1 Answer

Printer does not print

I bought a canon 1p 1600 photo printer and it has never worked. The power light keeps blinking green and the cartridges are always on the right side of the printer (opposite the loading area). When I try to print I get an error message that the cartridges are not loaded properly and that they are in the loading area. As I said, they are not in the loading area and in fact I have to turn off the printer and manually move the cartridges from the very right part to the left where the loading area is to load the cartridges. I have looked on the website regarding how to load the cartridges and they snap in perfectly. As soon as I turn the printer back on the cartridges again move the right of the printer. Anyone have any insight? I would really appreciate it!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi there
You can try this it some times works.

Super Canon User's method of resetting IP1600
1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16)
2.Open the cover right away
3.Release Both cartridges out and then put cartridges them back again
4.Close The Cover
5.Turn Off Then Turn On again.

You can download the Resetter tools program from my website.

Click Link = http://www.4all2sell.com/reset-tools/ip1600st-RESETTER-TOOLS.zip
1. Download software for Canon iP1200, iP1600, 2200 Printers.
2. Unzip downloaded file by etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.
Free WinZip http://www.winzip.com/downwz.htm
Please call back to vote
All the best: Pineworks

Posted on Feb 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replaced the larger black cartridge and the print is not showing some of the coloured text is working also the message waste ink absorber is almost full. I cant see in the manual what to do , any...


Before you buy your cartridge let the Serial no be sure... Ink absorber is need to reset you printer... Follow this instruction step by step to reset your printer..
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal. Thank.

Aug 25, 2011 | Canon PIXMA IP5200 InkJet Photo Printer

1 Answer

Printer not able to print?


Printer Keeps flashing green light

Mar 31, 2010 | Canon BJC 250 InkJet Printer

1 Answer

Cannon 1p 1980 printing problem


Hello my friend,this is mean that your fine cartridge cannot be recognized.Maybe your have replace it and you havent install it correcty or is incompatible with your printer

Feb 04, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

I refilled my canon pixma ip3000 black ink cartridge and now the black will not print. Can you help?


Canon 3000 INK counter reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Jan 14, 2010 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

Printhead is not recognizing the ink cartridges


Canon IP3000 INK counter reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..


All The Best Pineworks

Dec 29, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

On off light blinkinking from green to red and I


Canon IP3000 INK counter reset
Can gave it a go may work

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Dec 14, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Will not reset, light blinks 8 times


Hi there you can try this

Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i950)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter


All The Best Pineworks

Jun 04, 2009 | Canon I990 InkJet Photo Printer

2 Answers

Power & Yellow Resume Button flashing constantly & will not print


Ok please try




1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jun 05, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Canon i560 printer


I have similar problem. I found this solution that may help you. My problem insists tho.

>>> 5 flashes indicates a faulty printhead or possibly a problem with the p/head contacts. Try removing the head which is easier if you take the cartridges out first(no tools required) and re-seat it having checked the contacts for dirt.

If that doesn't work it may be that the waste ink tank is full. Try this ...
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

May 28, 2008 | Canon BubbleJet i560 InkJet Printer

15 Answers

Waste ink absorber on canon iP 1600


For Canon ip1000 and ip1600, maybe others

1. remove cartridges
2. unplug AC power
3. hold power button and plug AC power (keep holding power button.
4. press resume 4 times


The waste ink counter should be reset by now

Or

http://www.servicemanuals.ru/download/canon/ip1600.htm

Aug 13, 2007 | Canon PIXMA iP1600 Printer

Not finding what you are looking for?
Canon PIXMA iP1600 Printer Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2153 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...