I have got new batteries, got a new mem card, and cleaned the lense with a cloth no lubricants. And everytime i turn my DV3000 Mustek on it turns off sometimes 20 seconds before i press anything and sometimes i have to press the buttons lightly to make it change to pic mode from video mode. But mainly when i press delete or the lighting change buttons it turns off automatically even when i have full battery power.
!! Please Help !!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Without the memory card, turn your camera on. (If it works then it?s your memory card that is faulty) 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a No power repair or a new cable.
Please remove your battery and polish the terminals with
a dry cloth and make sure the terminals are clean. If the terminals are
covered with oil from your skin or similar matter, this may cause poor
contact and power may not be fully supplied to the camera.
polish the battery charger terminals with a dry cloth before charging
the battery. If the terminals are covered with oil from your skin or
similar matter, this may cause poor contact and the battery may not be
Next please remove your memory card and format in your pc using card
reader and then use it on your cam.If you have another mem card then
use it in your cam and see if you face the same problem.
Also try removing your mem card and battery from your camera and allow
it to reset for 20min,then just insert the battery without the mem card
and see if you face the same problem.
If you need any more help let me know..
Please don''t forget to rate or accept the solution no. 2 in the premium problem.
Damp or just dry flex ribbons inside connecting the touchpad can be the cause and opening the camera and giving it a good wipe with wd40 or another lubricating fluid(use a fine artist paint brush)may solve your problem.The camera is easy to open but when lifting the right half of the housing away(screen side) be gentle and disconnect the flex ribbon underneath or you will tear them.