Question about GE Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

The lighrts on the display of my xl44 wont turn on...which controls the oven temp

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 338 Answers

You have 1 of 2 problems. your range is either in sabbath mode or your clock control is bad. if you have your model number i can get you directions to see if it is in sabbath mode. unless you have your user manual

Posted on Nov 27, 2008

  • kann125 Mar 26, 2011

    My oven is in Sabbath mode and I cannot get it to clear. The touchpad is not responding. Please help! GE Profile oven.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xl44 GE GAS RANGE OVEN WONT WORK, RED LIGHT IN


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101



czvb



May 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Describe your GE Profile Spectra XL44 Oven


My GE Profile Convection Microwave Oven will beep and display a F2 for no apparent reason. What is this?

Mar 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE XL44 oven won't turn off. Knob off and pin is loose


My GE XL44 oven would not shut off and it turned out to be a worn out thermostat for the oven. I have written up a step-by-step tutorial on how to replace the thermostat on my blog: John Fixes Stuff GE XL44 Oven Will Not Turn Off How To Replace Oven...

Jan 17, 2010 | GE Kitchen Ranges

1 Answer

Temp of oven did not go over 350 when it was set at 380,,,was cooking fried chicken spectra xl44


Probably the RTD is going bad. That is a resistive temperature device. It changes resistance over temp and feeds a voltage back to the oven controller telling it that the oven set temp has been reached. If you are not reaching your temperature then I would suspect the RTD.

Dec 15, 2009 | GE Kitchen Ranges

1 Answer

I have a GE xl44 gas oven/stove. I cleaned the


Change the Temp sencor for the self cleaning

Dec 05, 2009 | GE Kitchen Ranges

1 Answer

Oven temp control not working


you need to calibrate the oven.

go to this web site

http://genet.geappliances.com/geasearch/Dispatcher?REQUEST=GETSEARCHRESULT

the second in the list is your solution

Dec 02, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE Spectra XL44 oes not heat to desired setting


The oven sensor ( WB21X5301) is suppose to tell the oven control when to turn on and off to reach and maintain oven temp, but before you go replacing it, try to observe how long it takes from the time you turn the oven on to the time the oven ignites. Ignition should be 30 seconds to about 90 seconds. If it is taking a very long time, replace the igniter (
WB2X9154
). Ignitors get weaker over time, and this should be looked at first, as both parts are not real cheap, so you don't want to just start throwing parts at it. Here is a trick you can try: On the JGBP90 (model you posted under) the broil ignitor is the same part number as the oven ignitor, so if the broiler, which is generally used much less than the oven, is working fine you can interchange the two ignitors to see if that solves your oven temp problem without having to buy a oven temp sensor first.

Nov 10, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Ge xl44


GE XL44... Oven does not work. It was working just fine one day & then would not work. Everything else works fine. Stove has electric ignitiion. Could it be it is not working on the oven? Any ideas?

Jan 02, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Digital Control (for oven temp and clock adjustment) not working


Puzzeled, usually when there is a stuck or shorted keypad there will be an error code. First let's see if we can tell if we are in Centigrade or Ferenhiet. Press the bake and broil button together for 2 or 3 seconds. SF should appear in the display. Press the broil pad again and C or F will be displayed. Toggle to F and press start. See if that was the problem. If not try to increase the speed of the + and - keypads. Press bake and broil together for 2 seconds until SF displays. Press the + keypad increase the speed of the control. It should toggle from 1 to 5, 5 being the fastest. Press start and see if that works. If niether works..then have someone remove the keypad ribbon cable from the control board and clean the ends with an eraser. See if that solves the issue...Catriver..post back and let me know.

May 12, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...