Hi. I have had a Philips MMS 460 5.1 surround sound system for about a year already. However, its been plugged and unplugged from my computer to my ipod in various times. However, there is no power now and i do not know why. I have even replaced the adapter with another one of the same output and input thinking it might be the adapter but it still does not work and i do not know why. Any help would be nice. thanks
there is most likely an internal problem then and it would need to be tested to see what has exactly happened to it
if you cannot work on this then taking it in to a repair shop or seeing what phillips can do for you would be a couple of options
My problems are the sound in my boxes are some times good and otherwise i here sound with a bromming...
(More)
My problems are the sound in my boxes are some times good and otherwise i here sound with a bromming in the speakers
cannot get surround sound to work. Only 2 of the 5 speakers work Phillips MMS 460. Those would be...
(More)
cannot get surround sound to work. Only 2 of the 5 speakers work Phillips MMS 460. Those would be the Front Out speakers, marked as "white". The Surround Out do not work, unless I plug them in the other 3.5 jack connector. Then the Front Out speakers do not work. The Subwoofer does not have any sound either. The center speaker gives out no sound itselft, although the power button on top of it and the volume control do work. Could it be that the unit is defective and in need of repair? That I need to test it with a DVD or CD that will play in surround sound? I bought it open box and the retailer says they tested it and everything should work. I did notice that the external power cord plug does not fit snug. It should plug in right up tight to the subwoofer. It does not. Could that be the problem? I have a Gateway computer and the hookups all color coordinated, the installation was no problem.
there is no manual power switch to my home theater & my remode-controle is not working so i...
(More)
there is no manual power switch to my home theater & my remode-controle is not working so i want to manualise by putting a manual switch in circuti so where shal i inshort that switch in ckt
we want the ic no. NF2453 for home theatre remote assembly and also the ic no. CX6122 for the...
(More)
we want the ic no. NF2453 for home theatre remote assembly and also the ic no. CX6122 for the transmeter , if not the ICs whole kit will do . please reply for where we can buy or order it . or please find me the substitute . thank you
hi, i have the above speaker system which says it can connect to the tv - however there are only the...
(More)
hi, i have the above speaker system which says it can connect to the tv - however there are only the 3 jacks to connect, all headphone jack size. if i connect only one then i only get parts of the speaker system working! is there an adapter to plug all wires in to a scart to connect to my tv so i can actually use all 5 speakers - hence getting surround sound!