Question about Watches

Open Question

I'm having trouble setting my nixon super rover ss. I just want the second hand to work but it doesnt tic. it has something to do with the chrono but i dont understand how to make my wtahc tick normal with hitting the start button on the chrono. any ideas?

Posted by on

2 Suggested Answers

  • 2501 Answers

SOURCE: I need extra links for

I have looked at the Nixon site and it says that spare links are provided in the bottom of the box, see below.

Do you still have the presentation box?

"The compartment at the bottom rear of the watch stand can be opened and closed, and it contains the user manual and extra links and pins."

Posted on Apr 07, 2011

  • 1 Answer

SOURCE: my new nixon 42 20

  • Undo & pull the crown all the way out,then
  • undo the adjuster button (the one underneath the crown)
  • push the stop/start adjust button one push at a time and it will move in slight increments,keep going till you get the second hand on the 12 mark
  • then push the top adjuster and it will go back to the 12 mark.
  • Push the crown in and wind your adjusting buttons up and you have finished

Posted on Sep 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a big tic fossil watch. The flashing second is working properly, but the hand doesnt. It looks like slowing down. How can I fix this problem. Thank you


your watch has two batteries inside, the small battery is the one that had to be replaced. it is under the big battery, the small battery makes the minute and hour hand move while the big battery makes the seconds flashing. i hope that i had been helped you.

Aug 01, 2011 | Fossil Big Tic JR7896 Watch

1 Answer

My new nixon 42 20 when i reset the chrono the second hand doesnt go back to zero it goes to 16 seconds past how do i sort this problem its annoying !


  • Undo & pull the crown all the way out,then
  • undo the adjuster button (the one underneath the crown)
  • push the stop/start adjust button one push at a time and it will move in slight increments,keep going till you get the second hand on the 12 mark
  • then push the top adjuster and it will go back to the 12 mark.
  • Push the crown in and wind your adjusting buttons up and you have finished

Aug 20, 2010 | Nixon 4220 PU Chrono Watch Black

1 Answer

The hour hand on my chrono will not reset to 0 when the min and second hand do


Pull the crown out as if to set the time then press the chrono pusher,this will advance the chrono hand.

Aug 16, 2010 | Nixon 51 30 Pu Watch

2 Answers

I need a couple of extra links to my black and silver Super Rover


mcdevito75 here, BEST BET, look for a small watch repair shop in your area, chances are you"ll have to order these links from Nixon watch.

Jul 12, 2010 | Nixon Super Rover NIX0123

1 Answer

I change the battery of my nixon superhero TI/PU and now i cant see the digital numbers what can i do??


you need to restart digital part of the watch. Open it ( the screws part) and there you will find 2 reset contacts. You need toen close the contacts with the big battery in it. Then it should start working. This acion have helped me few hours ago.

Jun 19, 2010 | Nixon Super Hero Ss Ii Black Watch

1 Answer

When I reset my chronograph, the second does not stop at the 12 but stops about 4 tics past 12.


pull out the stem to the first or second posistion and use the top or bottom buttons to zero it out.

Oct 09, 2009 | Nixon Super Rover Watch

1 Answer

Nixon Watch "Tide Rover" moisture problems


if it does not say water resistant, it isnt. sorry . but hope they repace it.

Mar 26, 2009 | Nixon Tide Rover Ss Silver Watch

1 Answer

Nixon super rover..need to know how to reset the chronograph


Pull the stem all the way out...like your setting the date. Then hit the upper button and that will move the hand 1 second at a time until it gets here you want.

Feb 14, 2008 | Nixon Super Rover NIX0123

1 Answer

Luminox 8152 chrono


If you have your instruction manual it should tell you how to reset the chrono. i have the Luminox 8352 and it says to pull the crown out to the 3rd position. then press and hold both the start/stop and lap/reset buttons for a couple of seconds. you'll see the second hand rotate, then you can single click the start/stop button to manually move the second hand 1 second, or you can hold it and it will continue move for a longer period until time desired. if you need to adjust the other chrono hands, click the lap/reset button and then you can click the start/stop button again. repeat for the minute/hour chrono hand. when you're finished push the crown back in. it might work even though it's a different model, worth a shot? hope that helps. these are really great watches.

Jan 02, 2008 | Luminox Field 821 wristwatch

Not finding what you are looking for?
Watches Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...