Question about Kenmore 24902 Top Load Washer

1 Answer

My kenmore 80 does not turn on - Kenmore 24902 Top Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

Check power at outlet,,if good check power cord,,,if good check power going in to timer..

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 80 series washer won't spin or agitate


check to make sure the belt hasn't come off. if it's direct drive make sure the shaft is working and moving freely. if all of these check out the motor that turns everything my be stuck, frozen up or just bad all together.

Jul 14, 2012 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series


you may need to take some clothes out, since it might consider the situation an overload..try that first and see if it helps

Mar 10, 2008 | Washing Machines

1 Answer

Kenmore series 80 heats and turns fine but stops after 30 minutes or so at any heat setting


Does it restart after it cools down? If so your motor may be overheating and shutting down.

Jun 20, 2012 | Kenmore series 70 80 90 Dryer Motor...

1 Answer

Kenmore 80 series washing machine model stopped spinning


Check this out acc8ce4.jpgmight be a partially defective coupling or lid switch. More HERE

Mar 21, 2010 | Kenmore Washing Machines

1 Answer

I just replaced the transmission on my Kenmore 80. No agitation


your motor turns one way for the spin cycle and the other way for agitate. remove the coupler and test it that way.

Feb 04, 2010 | Kenmore 24832 Top Load Washer

1 Answer

Kenmore 80 series wash machine humming


you have a clogged pump
the pump is hooked directly to the motor if thats cogged the motor cannot move producing a humming sound

Oct 07, 2009 | Washing Machines

1 Answer

My kenmore 80 top load series wont rinse top load wont rinse


drain pump is trying to drain. maybe have something in pump

Jun 22, 2009 | Washing Machines

1 Answer

Kenmore 80 Series washer wont spin or drain at end of cycle


POST ME THE MODEL NUMBER. AND ALWAYS POST MODEL NUMBERS WHEN NEEDING ASSISTANCE PLEASE:)))

Apr 17, 2009 | Washing Machines

1 Answer

Kenmore series 80 washer: does not twist in the middle


Check the agitator by turning it back and forth. It should work like a ratchet (turns one way, locks the other way).If you're able to turn it in both directions, the agitator dogs are worn and need to be replaced.
Remove the agitator cap and the bolt that holds down the agitator. With the bolt out you can remove the top section of the agitator (auger) where you should see 4 small white or beige plastic gears (dogs). Replace those and it should be ok.
12763ce.jpeg
Part number is 80040

Let me know if you need more help.
Good luck!

Apr 01, 2009 | Kenmore Washing Machines

1 Answer

I replaced the lidswitch on a Kenmore 80 series washer. Nothing


Possible bad pressure switch. Turn unit on and jump out 2 wires at a time (3 wires go to it). See if any of your combinations get unit running (one of them will cause water valve to open); if so then that is your problem. Thanks, please leave feedback or contact me again for more info if you need it.

Nov 28, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 24902 Top Load Washer Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...