Question about Uniden 2.4 GHz Expandable Phone System with Digital Answering Machine

2 Answers

Phone won't hang up

I have a Uniden 2.4 ghz digital cordless phone that won't hang up. I have to unplug it from the phone jack and the wall in order to reset it, once I am done with a call I cannot "end" the call without resetting the system. I don't know if the problem lies in the phone or the phone line.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I solved this exactly problem by doing this:
1) unplug base station from phone line
2) unplug base station from power cube
3) open each phone and disconnect battery (do not replace phone in charger; just let it sit)
4) wait 30 minutes (per instructions from Uniden)
5) reconnect batteries in phone sets
6) reconnect power cube to base station
7) reconnect base station to phone line
8) test: make a call. Hang up. Wait one minute. Pick up line and see if you get a dial tone.
(Basically you're "rebooting" the system. You don't know where the fault lies, so you power down every component to make sure you get it. The '30 minutes' is longer than I'm used to, but after being on hold with Uniden tech support for 20 minutes and finally getting through, the instructions from them were very clear: AT LEAST 30 minutes. OK! I did it - and it worked!)

Posted on Jan 21, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 381 Answers

LEO Privacy is probably one of the best privacy apps ever. Also there's this thing were it boosts your storage, which it does, but I still have to go in the settings to clear somethings. But an app can only do so much so I don't worry. You should get LEO Privacy.??
LEO Privacy Applock Boost Hide Android Apps on Google Play

Posted on Aug 09, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the amount of rings on the uniden dect1363 6.0 GHz


The Uniden DECT 1363 isn't an answering machine. It will continue to ring until someone picks up, a separate answering machine or voicemail system picks up, or the caller hangs up. You need to refer to the documentation for your answering machine or voicemail system.

If you require further assistance, please repost your question specifying the make and model of your answering machine or voicemail system.

Sep 18, 2012 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

How do I turn on my speakerphone for my Uniden EXP4540?


Sorry, Uniden EXP4540 2.4 GHz does not have a speaker phone feature. The cordless phone features AutoTalk™ and AutoStandby™. AutoTalk™ allows you to answer a call by just removing the handset from the base so you don't have to waste time pushing buttons. AutoStandby™ allows you to hang up by simply returning the handset to the base. You can check it's manual with this link http://www.uniden.com/pdf/EXP4540om.pdf.
Thanks for using fixya!

Mar 30, 2011 | Uniden EXP4540 2.4 GHz Cordless Phone

1 Answer

How to register phones?


Reset Procedure for Cordless Phones
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.

Mar 02, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Cordless phone has volume problems with DSL


For starters that dsl modem should not be filtered.
You should place the splitter directly into the wall jack and place the filter on the side used for the phone. The side feeding the dsl line should not be filtered.
The filter serves 2 purposes. 1 it reduces data noise interference onto the voice line. 2 it prevents dsl interference from voice such as picking up and hanging up the receiver.

Aug 26, 2009 | Uniden Cordless Phone

3 Answers

We have a lot of static and loud buzzing on the phone


I had the same issue that started on some 3 year old 5.8 GHZ Uniden cordless phones. I moved it from room to room and same buzzing. I found a older Uniden set I had kept in a desk drawer. I swapped out the power transformer (power cord) and it is clear as a bell now.

Jun 15, 2009 | Uniden 5.8GHz Cordless Phone

1 Answer

Uniden base display does not work after chargin for 1st time.



Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances

May 05, 2009 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Hit the deregistration button. phone will not work now.



Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.
<KEYWORDS="RESET, call,? can?t tone, dial no flashing, unavailable, range, of out working, not up, messed>

May 05, 2009 | Uniden Cordless Phone

1 Answer

Uniden 2.4 GHz cordless phone won't register to base


Same happened to me. Unplug the base from power and the phone line for 30 minutes. Same for the handsets - all. Take out the batteries. Retry. After it says 'registration failed'. Leave it in the cradle. Several minutes later it found itself.

Mar 10, 2009 | Uniden 2.4 GHz Cordless Phone System

1 Answer

My uniden 5.8 ghz will only ring 2 times. I have


Reset the base by unplugging power from back of base, press and hold the delete key while reconnecting power

Mar 04, 2009 | Uniden DXAI8580-3 5.8 GHz Trio 1-Line...

Not finding what you are looking for?
Uniden 2.4 GHz Expandable Phone System with Digital Answering Machine Logo

Related Topics:

3,951 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

4950 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...