Question about Kenmore 96422 / 96424 / 96429 Electric Kitchen Range

1 Answer

Sears kenmore self cleaning electric range

Self cleaning mode will not shut off. I ran it through the whole process and yet the self cleaning lights are still blinking. I unplugged the power but it still stays in s.c.mode and will not switch to normal function

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

F9 code appears - won't do self clean annymore

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven door is locked out - Sears no help


      1. Step 1 Read the display on the electronic oven controls, where the clock and timer normally appear. If the display reads "CLN" while the "Door Locked" light is on, the Kenmore range is in self-clean mode. When the Kenmore range is in self-clean mode, you must stop the cleaning process before the door will unlock.
      2. Step 2 Stop the self-cleaning process by pressing and holding the "Stop/Clear" button for three seconds. The oven lock should disengage after three seconds. In some cases, a malfunction between the control panel and the locking mechanism prevents the door from unlocking.
      3. Step 3 Hold the light switch for several seconds if the "Stop/Clear" button fails to unlock the range door. Engaging the light switch for several seconds resets the entire locking mechanism and overrides the "Stop/Clear" button.

Jul 03, 2015 | Kenmore 30" Freestanding Electric Range...

1 Answer

Replaced oven light and now oven won't work


Does the light work? Will it heat if you remove the light?

Nov 24, 2012 | Amana ACS7270AS Electric Kitchen Range

1 Answer

How do i start the self cleaning on Kenmore warm and ready range/self cleaning?


Hi,


Before you go working too hard to get you oven to go into the self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!

Feb 02, 2011 | Kenmore 96412 / 96414 / 96419 Electric...

2 Answers

Have a Kenmore Electric Range Model- 790.4671. Ran the self cleaning program. Error occurred at the end of cycle. F10 and F30. Oven will not unlock. Show oven locked and a picture of a lock. Oven is...


Sorry to read about your problem
Your F10 code means Runaway Temperature and f30 means open probe connection. try this and see problem comes back.
1. Unplug the unit or turn the circuit breaker off for 60 seconds.
2. Now, restore the power to the appliance by plugging it back in or turning the circuit breaker back on.
3. Check to see if the error code is still displayed on the range.

Note: General information for resolution to this problem, is based on information provided in question. Contact certified technician if problem persist. Sears Repair 1-800-469-4663

I have tried to help you.Pleas help me by Vote/Rate my response. Thanks.

If you are in the Denver,Co area I can help you out.

Dec 20, 2010 | Kenmore 46713 Stainless Steel Electric...

1 Answer

Sears (Kenmore) drop-in unit, Model 911.4698815. Ran the self-cleaning cycle - now it's showing Error Code F3 and neither the bake element nor the broil element will work. Any help would be...


All F3-E Codes - Oven Temperature Sensor (RTD) or Warming Drawer Defect - Replace oven temperature sensor (RTD).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question^$#@

Sep 12, 2010 | Kenmore 95822 / 95824 / 95829 Electric...

1 Answer

When I put oven on clean, it starts beeping to


Hi,
Before you go working too hard to get you oven to go into the self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem
http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!

May 05, 2010 | Kenmore 91112 / 91114 / 91117 Electric...

1 Answer

Kenmore Electric Range model 790 has F9 & F1 code error


Hi,
Before you go working too hard to get you oven to go into the self clean mode....check out this tip...


http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! "

Apr 20, 2010 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

Self-cleaning oven doesn't work on Kenmore electric oven


I suspect the timer is involved in this process. It can be set to clean automatically. You need to set the complete time at least 2 hours after start.

Aug 27, 2009 | Kenmore Kitchen Ranges

2 Answers

Kenmore 790 Oven Locking mechanism problem


hold down the stop/clear button for 3+ seconds

Jan 13, 2009 | Kitchen Ranges

Not finding what you are looking for?
Kenmore 96422 / 96424 / 96429 Electric Kitchen Range Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Mike Carew

Level 3 Expert

958 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...