Question about Frigidaire FMV156EM Microwave Oven

1 Answer

My FMV156CC Finished cooking cycle. I opened the door and then when I went to cook the next item, it lights up and the timer counts down, but the turntable does not work. I live in Indianapolis just north of the Greenwood Mall. Thanks, Kevin Morgan

Posted by on

  • retread2006 Nov 27, 2008

    sorry FNV156DCC

  • retread2006 Nov 29, 2008

    How do you get the front panel off to get to it ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 338 Answers

If you take your control pael off and look inside where the door closes there should be a setup with 3 switches the middle is the monitor switch and it is bad needs to be replaced.

Posted on Nov 27, 2008

  • Robert Artiaco Nov 30, 2008

    you take the front grill off.. ther are 2-4 screws holding it in. then if it doesnt pull right off it may slide to the left before it comes off. then you will see directly above the control is a screw holding it on. take that screw out and slide the control up a little and out.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp Carousel R530BK microwave won't cook unless light pressure is kept on the door button.


There are door switches and one of them is evidently out of adjustment or the little actuator arm on it is.

Nov 27, 2013 | Sharp R530EWT Countertop Microwave Oven...

1 Answer

Microwave jes1142


If the timer counts down and nothing else happens, the secondary interlock switch is bad. This switch completes the cook circuit and this is why it doesn't run. You need an ohm meter to diagnose and find the right switch. Switch failure is caused by opening the door when it is in cook mode. Push the stop button first before opening the door and this failure will cease to occur. BE CAREFUL !!

Oct 09, 2013 | GE JES1142SJ Microwave Oven

1 Answer

My GE Profile Countertop Convection/Microwave Oven PEB1590DMBB Has stopped working.


It sounds like you may have a shorted cook relay on the control circuit board which can be repaired simply and inexpensively.

A YouTube video showing how to remove a typical over the range control panel assembly in under 5 minutes, is here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 30, 2012 | General Electric PEB1590DMBB: Profile 1.5...

1 Answer

Kitchenaid KCMS185JSS


The problem is one of the door switches has failed, usually caused by food partical buildup, switch must be replaced for normal operation.

Mar 12, 2012 | KitchenAid Microwave Ovens

1 Answer

Microwave plate turner keeps spinning even with door closed and microwave turned off


My microwave is doing this as well; It's a frigidaire model #FGMV154CLFA.

After using the microwave part (it is also convection), the light stays on in the microwave and the turner keeps turning.

And I've only used the convection part of my microwave a couple times and I'm not sure if I was successful. While trying to cook something in convection mode, I pressed convection, then pressed the temp i wanted, then convection, then keyed in the time I wanted the item to cook. The microwave started and the timer started counting down but the countdown stopped with 8 minutes left? I left it alone to see what would happen and it never finished so I restarted the process again.

PS..I've never gotten an error code

Apr 23, 2011 | Microwave Ovens

1 Answer

We have a Frigidaire FMV156DCC that is about 3+ years old. as of last night when the door is closed and the time is selected one of 3 things happen (or doesnt happen) 1. is nothing, just a dark...


I would replace the door switches and set up the door gap to 1/8" just enough to alow for a little play.
Setting the door square is acheived by slackening the lower door hinge and re tightening it when the door is square.
Hope that helps.

Jan 03, 2011 | Frigidaire FMV156DC Microwave Oven

1 Answer

When I go to cook something, there is barely any noise and oven doesn't cook. Plate turns slowly and timer counts down, but its not cooking. Also, light went out


I think it is time for a different microwave. Sounds like you may have some bad or worn capacitors, circuit board, or relays. The system will need to be fully tested to determine cause

Aug 06, 2009 | Microwave Ovens

1 Answer

JVM1190 wont cook


You have a blown actuator. This is the device that creates the microwaves that cook the food. The cost of one of these will be as much as a new unit.

Nov 09, 2008 | GE JVM1190 Microwave Oven

1 Answer

Frigidaire won't run


Quite often this is due to a bad door switch. Opening the door while cooking (without first hitting the STOP pad) is the primary cause of door switch failure. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info (as well as a text file which helps in diagnosing and repairing door switch problems) at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk

Aug 24, 2007 | Frigidaire FMV156EM Microwave Oven

1 Answer

Timer will run, but won't cook


Quite often this is due to a bad door switch. Opening the door while cooking (without first hitting the STOP pad) is the primary cause of door switch failure. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info (as well as a text file which helps in diagnosing and repairing door switch problems) at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk

Aug 24, 2007 | Frigidaire FMV156EM Microwave Oven

Not finding what you are looking for?
Frigidaire FMV156EM Microwave Oven Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9011 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Frigidaire Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...