Question about Uniden Cordless Phone

2 Answers

Using two uniden bases with same #

In large house have one base uniden dect2080 with four phones, but house is too large for base station to reach remote phones. Was told I can purchase a second base and attach it to the same number and use that base in the other part of the house. Will this work?

Products are:
- Uniden Dect2080 Series w/ 4 handsets
- Uniden Dect2088 w/ 2 handsets

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

YES THAT WILL WORK, THOSE HANDSETS CAN BE REGISTERED TO TWO MAIN BASES.

Posted on Sep 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

Yes, they are compatible.

Posted on Mar 18, 2009

6 Suggested Answers

  • 3 Answers

SOURCE: "i have a uniden 6 0 dect2080 3 answering machine how to check the messages from a different phone"

The default security code is "80". If you have not reset that code, you will use 80.
This is all from the manual:
1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sounds a series of beeps.
2) During the greeting or the beeps (if answering system is off), press 0 (zero) and enter your security code within 2 seconds.
3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero" followed by a beep.
Then the manual lists all the remote commands. If you need those, you can go to uniden.com and download a manual.

Posted on Apr 26, 2009

Imsian
  • 97 Answers

SOURCE: need uniden DECT2080 user manual

hello.

You can download manual from here

http://www.uniden.com/pdf/DECT2080om.pdf

gud luck

Posted on Sep 02, 2009

Testimonial: "Great, thank you so much, downloaded it already!!!"

  • 569 Answers

SOURCE: I need an Uniden phone DECT2080 owner's manual.

You can find the manual here:
http://www.uniden.com/pdf/DECT2080om.pdf

Posted on Dec 16, 2009

  • 102366 Answers

SOURCE: lost manuel uniden DECT2080, how

You can download the manual from the manufacturer's web site at
http://www.uniden.com/pdf/DECT2080om.pdf

Posted on Aug 11, 2010

jyackle5
  • 8197 Answers

SOURCE: Need a user manual for Uniden DECT2080. I have the

You can get the manual on the link below.

http://www.uniden.com/pdf/DECT2080-2om.pdf

Good Luck and please rate 4 thumbs up for the free answer

Posted on Sep 02, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a uniden ZO68 i want to add another hand set to this i have brought another uniden ZO68 second hand hand set and i can't set it up can you help me please


did you get the charging base with the hand set
is it a charging base or a base station base
if it is just a charging base , follow the instructions as how to get the base station to recognize the next phone
if it is a base station, probably won't work as you will have 2 base stations trying to work and that will create conflicts
talk with a telephone technician to see what can be done

Oct 30, 2016 | Uniden Lands Phones

1 Answer

Uniden dwx207


When a handset is reading "Searching", it can't communicate with the base. First, check if the base station is plugged into a live outlet. (Try plugging the base into a different outlet or making sure that the circuit breaker hasn't popped. I had a cordless phone base plugged into a UPS. During an extended power outage, the UPS was turned off. The phone didn't work until someone noticed and turned the UPS back on.) Move closer to the base station.

If this was an extra handset purchased later, make sure it is compatible with the base station. The Uniden DWX207 works with the DECT1500, DECT2000 and DECT3000 series bases. Register the handset with the base. The registration procedure depends on the base station. If the base unit has an LCD screen, with the phone in standby, press Menu/Select and press the down arrow to reach "Register Handset". Then press Menu Select again. (If the base doesn't have an LCD screen, unplug the power cord. Then hold the Find HS or Find button as you reconnect the power cord until the Charge/In Use light starts to blink.) Then press the # key on the handset before the registration period ends.

Make sure that you haven't exceeded the number of handsets for your base. You may need to de-register all handsets and then re-register them.

If no handsets will pair with the base, replace the base unit. The transmitter or the receiver aren't communicating properly with the handsets.

I hope this helps.

Cindy Wells

Oct 06, 2013 | Lands Phones

2 Answers

How do i turn off the silent mode on a uniden phone, ive held down the # sign and nothings happening


Silent Mode
You can silence the ringers on the base and all handsets for a specific period of time; the answering system answers any incoming calls without playing anything through the speaker.
With the phone in standby, press and hold # on any handset. The phone prompts you to select the number of hours (1 - 9 or Always On) that you want it to stay in silent mode.
To confirm, press # or just wait about 5 seconds. The phone turns on the answering system and displays Silent Mode On on each handset.After the selected number of hours, the phone automatically exits silent mode. To exit silent mode manually, press and hold # again.
If the phone is in silent mode and you turn off the answering system, the phone exits silent mode.
Multihandset Features To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came with the base and up to 11 DCX160 accessory handsets.You must register accessory handsets to the base before using them. (Handsets that came packaged with the base are already registered.)Handsets that aren't registered display a Not Registered message. For registration instructions, see p. 18, or see the accessory handset manual.If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 18, or see the accessory handset manual.Conference Calling
When an outside call comes in, two handsets can join in a conference call with the outside caller.
To join a call that's already in progress, just press Talk/flash or SpeSpeSpeaker.To leave the conference call, hang up normally; the other handset remains connected to the call.

Aug 18, 2011 | Uniden DECT 2080-5 Quint Phone

1 Answer

Will the vtech interact with already an existing Uniden 5.8 ghz power max base unit and handset plus one additional handset and charger to give me four locations or just two more single handsets with...


Hi there, Your new phones will not interact with a base station from another brand of phones. If you want to use one base station, you can buy single phones of the same model and brand and those will interact with the original base station. Your new phones will not connect to the old base station Sorry, Alex

Jun 03, 2011 | Vtech CS62192 Cordless Phone

1 Answer

I have a dect2080 cordless. how do i turn the ringer on?


On the handset, press up-arrow to turn up the volume and down-arrow to turn down the volume or to turn it off completely.

On the base, use the volume+ and volume- buttons for the same purpose.

If you need a manual, you can download one at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT2080om.pdf

May 28, 2011 | Uniden Cordless Phone

1 Answer

My phones went dead and went into searching mode. Phone lines are working just not base


Your base station is dead, this is common with Uniden phones. You will need to purchase a new base station. You can use the new base station with existing phones as long as you buy a compatible model.

May 03, 2011 | Uniden DECT 6.0 Cordless Phone ID

Not finding what you are looking for?
Uniden Cordless Phone Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

4922 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...