Question about Kensington (1500100) Networking Hub

1 Answer

Power adapter for Kensington (K33118A)7port hub

Trying to find out what the power requirements for the hub are as my adapter was lost in a flood. What the voltage needed is and the the wahy the pin is set up Positive / Negative in or out.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This message I received from manufacturer -

Thank you for contacting Kensington Technical Support.
We would like to inform you that DomeHub USB 2.0 (7 ports) requires 5 volts, 2.5 amperes and has Center Positive.

Posted on Jan 15, 2009

  • Jay Levan Nov 29, 2011

    I came here to learn the voltage of the power supply for the DomeHub 2.0 7 port hub. However, now my question is - Does it come WITH a power supply, or is it an option? I'm asking because I'm not sure if I should keep looking for the PS that came with it or if perhaps I never had one... and so, need to find it through a 3rd party.

    Thanks you for any help with this.
    jay@phodoz.comhttp://phodoz.com

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which Kensington notebook power supply tip will fit a MSI CR600 notebook computer


this is not a supported laptop for kensington power adapters. here is a list of compativle brands and their tip numbers

http://us.kensington.com/html/13675.html

Feb 12, 2010 | ACCO Brands Kensington Wall Notebook Power...

1 Answer

Lost Power Adapter for Unicom Mini-switch/8 8 port


method 1: buy a power adapter that has a switch controlled output voltage - they usually have 3V - 4.5V - 6V - 7.5V - 9V and 12V selectable output. Start with 6V and if its not working unplug, select 9 and try again etc. etc.

method 2: open the case and locate an electrolytic capacitor right near the power plug - the biggest one. Note the voltage (for example it may say: 1000uF/15V) and have in mind that your device MUST work at a LOWER level that this.

you can combine the two methods to be safe...

Oct 02, 2009 | Port Incorporated 8-port 100Base-TX Mini...

2 Answers

I have a Q-Stor 7 port USB hub, Model QU2RCT7. I


I don't have the original power supply for my QU2RCT7 either, but most hubs use a 5v DC power adapter, typically with a 2A. (2 amp) rating. I'm using such an adapter with my QU2RCT7 and it works fine. Make sure the adapter you select is tip-positive (ie, the "+" terminal is the "tip," or center, of the connector).


Sep 14, 2009 | QPS (QU2RCT7) 7-Port USB Hub

2 Answers

Need to know power requirements for the kensington k33141 usb hub


hello,
i believe i know the answer. i have the kensington pocket hub se 2.0 model: k33141. it seemed to work with the adapter i found in our closet. it is a dve Model : dsa-0131f-05 us 13 and it outputs 5v 2.5a. the adapter has a thin profiile like it would be plugged into a strip. and it has an rf blocker which suggests computer equipment.

Apr 05, 2009 | Kensington (1500100) Networking Hub

8 Answers

Power supply for Targus 4 hub usb 2


Most USB hubs do not need an external power supply, except when a connected USB device draws more power than the computer/laptop USB port can supply. In this case an external power supply will need to be connected to the USB hub.
Normally this would be a 5 volt power supply, but make sure the polarity on the connector matches the power connector on the hub, check the label on the hub, sometimes it states to power requirements of the hub as well as the polarity on the connector. Normally the pin on the hub's power connector is positive (ie. +5V)

Nov 13, 2008 | Targus PAUH217U 4-Port USB Hub

3 Answers

Entrega Hub 4U


The adapter that works on my machub4u y Entrega Technologies has a output of +5VDC at 2.5A with the inner post being positive and the barrel being negative.

Sep 01, 2008 | Entrega (HUB-4U) Networking Hub

2 Answers

Cpqusbfw usb hub


i have one of those hubs the ac adapter is output +5V, and current 0.2 - 2.5A, inside of connector is pos(+), outside is neg(-), input: 100 - 120 Vac and 0.45A Max

Aug 30, 2008 | Micro Innovations Compaq CPQ24USB

3 Answers

DC power adapter


The adapter for the DE-805TP supplies 9 volts dc at around .5 amps

Jan 13, 2008 | D-Link DE 805TP (DE-805TP)5x10 Mbps...

Not finding what you are looking for?
Kensington (1500100) Networking Hub Logo

Related Topics:

1,759 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kensington Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

69664 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

11983 Answers

Are you a Kensington Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...