Question about E-Machines eMachines Desktop PC

2 Answers

Computer is not working

My friends computer is a emachine 26532 but when he turns it on the moniter displays a no signle sign and the computer is making a high pitch sound can you help me and my friend????

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 174 Answers

Disconnect EVERYTHING FROM EVERYWHERE!
Reset CMOS.
Grab the main power cable from the power supply unit and attach the ATX connector to the motherboard.
Make sure the processor fan is connected to the correct socket on the motherboard or to a molex connector if it needs one.
Bung in a RAM module, in memory slot 1
Fit the display card and attach a molex power connector to it if it requires one.
Connect up the power switch, power LED, Reset and speaker cables from the front case panel. Unsure that all the front panel connectors used for this are facing the same direction. Sometimes even a power LED connector facing the wrong way can stop the system from booting.
Connect the monitor and keyboard, fit the power cord, and turn it on. MAKE SURE NOTHING ELSE WHATSOEVER IS ATTACHED TO ANYTHING.
If you've attached everything correctly, and you don't get a display showing the machine doing its self tests and ending up sitting there confused because there's no drives attached, then something's dramatically wrong!

Posted on Nov 26, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 251 Answers

Yes it is ur video card i suggest taking it to computer store

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green power light comes on goes off then on again stays solid, moniter says no signal, mouse lights up, and three red lights on key board flash then nothing why?


If the monitor power light is on or flashing, but nothing displays, borrow a monitor from a friend. If that works, your monitor needs replaced.

Nov 21, 2012 | eMachines EL1852G-52W

2 Answers

I keep getting no signal when i turn on my emachine desk top


Its probably the power supply..they tend to go quick on emachines.!Replace the Power supply.

Jun 11, 2010 | E-Machines eMachines Desktop PC

1 Answer

My emachine computer was working then just stopped, when I tried to turn it back on. the moniter is showing no signal received. I have tried checking the VGA connection, changing it out for another, no...


Try your monitor on another machine - if it is working you have operating system/hard drive/motherboard/memory/heating problems. You must work that out if the monitor is good.

Apr 01, 2010 | E-Machines eMachines Desktop PC

2 Answers

I have an eMachine that the moniter will not turn on. I run a virus scan. But cannot get the moniter the stay on. the power light is on, the screen is not working.


The first thing we need to do is figure out if the problem is the computer or the monitor.

Have you got another computer around, a laptop will work too.

Jun 17, 2009 | E-Machines eMachines Desktop PC

1 Answer

System failure?


Look up and locate the jumper for the CMOS reset. I had to do that to my Emachines. It was doing the same thing. My jumper was near the battery, and it said on the motherboard what it was. May or may not work but worth a shot.

Mar 30, 2009 | E-Machines eMachines Desktop PC

1 Answer

My emachine moniter keeps on displaying self check , check your pc and signal cable , moniter is working.


There is a problem with your video card / and or motherboard usually when you experience a problem like this.

Open the case, remove the video card from the motherboard, re-install it.

Let me know what happens and we'll go from there.

Feb 24, 2009 | E-Machines eMachines Desktop PC

2 Answers

Emachine problems


Hi..

Since your computer is working but no display at all. Hope this steps would be helpful in your problem.


1. Turn on your computer, If the problem works again and no display.

2.Turn off your computer by pressing long your power botton until the fan stops properly.

3. Unplug you computer 220volts power chord at the back of your computer.

4. Reconnect again the 220volts power chord after 1 minute.

by. arnold@supportsave.com


Jun 04, 2008 | E-Machines eMachines Desktop PC

1 Answer

The crazy blue box


crazy stuff here.. it might be the display or the harddrive check the pins on the display cable. how old is the PC? and have you added anything to the computer to damage the motherboard? I suggest doing a system recovery it might solve the promblem.

Sep 12, 2006 | E-Machines eMachines Refurbished EMA...

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...