Question about U.S. Robotics MAXg USR5421 802.11g/b Wireless Adapter

1 Answer

How to connect maxg with a my netgear broadband router

I have a Netgear wireless router that work fine, the problem is that I need a network printer for the family we have 7 computers.

I bought maxg hoping to useit as a wireless router+printserver but when I connected it to my broadband my phone stop working.

So how can I hook it up my my Netgear router so that I can still use the printserver on maxg....I have tried by using rollover cable to connect the 2 router

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

Try to turn off the DHCP server in the secound router, that way it'll be a swich technically, and set the secound router's fix ip address to something different, because I'm quite sure that both routers have the same 192.168.0.1 IP address and that's nogood.
Set it to anyting from 192.168.0.2 to 192.168.0.254

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP 6400 wireless printer will not work with netgear wndr3400v3 router


If the printer is connected via wireless it may not be set up correctly, as a network printer.
Connect it up via a USB cable to make sure it works, then change it to Wireless configuration and re-install it as a network not a USB printer.
see manual

http://www.hp.com/ctg/Manual/c01325559.pdf

Sep 13, 2013 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

Hi I have installed a netgear wireless usb adapter wg111v3 onto a PC (on another PC i have a netgear DG834GT router). After installing the adapter the "signal strength" is EXCELLENT and the "status" is...


You might not be getting a correct ip from your wireless router.

first, try to power down the computer and your netgear router for about a minute or two. turn the router on first. once the lights are stable on the router, boot up your computer. if your still not able to access the internet. try this

go to start > control panel > network and internet > network connections or network and sharing center > right click on wireless network connection and go to properties > highlight "internet protocol version 4 (TCP/IPv4)" > left click on properties, the wireless network connnection properties will then be opened.
make sure that the radio buttons are on "obtain an ip address automaticaly" & "obtain DNS server address automaticaly".

Sep 17, 2010 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

My Netgear WG111v3 cannot connect to internet


Hi,


You need to do some wireless setting on router,
Please follow steps to fix your issue

1.Please changed network (SSID)name of router
2.Reinstall adapter driver
If you follow above steps defenately your issue would be resolved

Apr 26, 2010 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

Netgear wireless adapter wg111t will not work work


It's impossible that the wireless router cannot detect your wireless adapter wg111t.
0a45630.jpg
You try to test another one if still have a problem connecting with your wireless router.
If that router can see another wireless network available then maybe your Netgear wireless adapter have a problem incomplete installation or the wireless device is defective.
I have encounter like this before so maybe it's the same with.
Hope my tip will help you a lot.
Good luck!
Please rate me.
Thank you.

Sep 14, 2009 | NetGear WG111T 108 Mbps 802.11g Wireless...

2 Answers

Netgear wireless adapter


In this case can you please tell me what is your wireless router and how may computer do you have so we can check if this is a problem with the wireless router or with the netgear wireless adapter. because if you only have 1 wireless computer so the problem here is with the wireless router we may need to change some wireless settings like the wireless channel .....

Nov 15, 2008 | NetGear WG111 802.11g/b Wireless Adapter

1 Answer

About wi-fi


Windows XP has a built in wifi configuration tool, previous versions of windows dont have this feature. But if you were to buy a wireless card it comes with software for wireless to work on all versions of windows from 98 - XP most if not all new laptops have wifi built in & that will be able to share your broadband connection through the netgear router. You can configure the laptop & pc to share files & printer between each other, easy way of doing that is by using the wireless network setup wizard which can be found in Start -> All Prograns -> Accessories -> Communications -> Wireless Network Setup Wizard.

Feb 10, 2008 | Network & Wireless Adapters

1 Answer

Need to know the solution


After a small amount of trouble, I have configured my Win 98 laptop to use
Netgear WG111v2 wireless modem to connect to my wireless router. I used
the driver from the CD that came with the modem, following the instructions and
got to the point, after rebooting a couple of times, where I was connected to the
router, but could not reach another computer on my network (or the outside world).

I double-clicked on the wireless model icon in the system tray and noticed that,
on the NetGear SMART WIZARD panel, the WEP key was set to use the
"Create from passphrase" option, even though I supplied the already generated key (the
hex numbers) during installation of the modem. (The modem was using the key
as a passphrase to create another key.)

To fix this, on the SMART WIZARD panel, I
selected the "Enter key manually" option and, er, entered the hex key (the one
the router/access point uses for security) manually.
I hit "Apply" on the Wizard and, lo and behold, I was pinging the rest of my network.

I rebooted one more time (I had some leftover bad settings in my "Network Connection"
TCP/IP entry for the WG111 connection; I reset them before the reboot
to allow my network to automatically assign an address) and I was then able
to view my favorite site (bythestadium) from my favorite browser (firefox)

Nov 20, 2007 | NetGear WG111 802.11g/b Wireless Adapter

2 Answers

There is some prob with my Netgear USB


yes , first of all just tell me which windows operating system u r using on ur computer

Nov 20, 2007 | NetGear WG111 802.11g/b Wireless Adapter

2 Answers

Help needed with WG834g & usb adapter


Sometimes a hard wire cable whether lan or usb is needed to set up the router first before going wireless. If not it maybe your pc needs a ip/dns flush from the last allocated numbers from your bt router. To clear this:- Click Start>Run, then type ipconfig /flushdns then press enter.

Jan 21, 2007 | NetGear : WG111 54 Mbps Wireless USB 2.0...

Not finding what you are looking for?
U.S. Robotics MAXg USR5421 802.11g/b Wireless Adapter Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top U.S. Robotics Network & Wireless Adapters Experts

Imre Vetro

Level 2 Expert

70 Answers

Sunday Ojelabi
Sunday Ojelabi

Level 2 Expert

301 Answers

Bilal Ahmed Qureshi

Level 2 Expert

195 Answers

Are you an U.S. Robotics Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...