I need to upload some firmware to my philips lcd tv (model#42PFL3704D/F7).my concern is that if my tv is frozen on the logo screen then how will I be able to upload it. can I use a usb cable straight from my pc to the tv?what are the ways to upload the firmware to the tv?

Mandeep Singh

• 1184 Answers
• Posted on Jan 03, 2009

SOURCE: need code for comcast remote control

HI,
Could you kindly give the exact model of the comcast remote that you are using.


Thanks
Proton

SOURCE: need help with TV calibration for philips

Try these, Contrast: 53 Brightness: 56 Color: 45 Tint: 2 Sharpness: 2 
Color temperature: Off
Dynamic contrast: Off
Digital Natural Motion: Off
DNR: Off
Color enhancement: Off
Active control: Off

SOURCE: We recently got a Philips 42PFL3704D/F7 lcd tv.

I had this a issue with the Component input not working right as well. I had a repair tech come to my house to take a look on Philip's dime. Turns out it's the main circuit board. You cannot obtain this part from Philips. I've been in a fight with Philips to replace the TV. All this started in Aug 09.

SOURCE: how do i watch movies on a philips 42pfl5603d/f7 from flash drive

the flash drive connection is usually for viewing pictures, but in most cases its used to upgrade the tv

SOURCE: Philips LCD TV "47, model PFL 8404H/12, NO SIGNAL on all 4 HDMI

This is quite tricky as it was working until last night and suddenly stopped receiving signals. What can happen wrong?
Do you have any other Player or other HDMI cables to try out. Sometimes the cables would be damaged or PC may fail to detect the HDMI.

Try this out from Philips helpdesk where there is new SW and FAQs are available.
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=42PFL8404H/12&slg=en&scy=CZ

Let me know if you are not able to upgrade the FW (if you do not get the support on ugprading)