Re: I just bought the coffee maker and it says the drawer...
I have a CM24P that had the power supply short out and I have decided not to repair due to the high cost of replacement parts. I have decided to part my unit out. Send part requests to Rick at email@example.com.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this is normal as there is no switch or sensor. In fact the Royal as well as the Magic and others are counting the number of coffees that you have made between two removals of the dreg drawer. For this counter to reset, you have to remove the dreg drawer while the machine is ON, and remove it for about 10s minimum.
Retry and tell me if it is better.
Hope that helps,
In your manual you will find a number to call for questions. They will replace you cant fix. You just pay a low shipping charge. You could also return it where you bought it. It is still under warranty.
Returning to Target may be a possibility, but is subject to the store's individual return policy.
An ERR 2 may be cleared by a simple reset of the coffee maker. This
means unplugging the unit and plugging it back in. When powered back
on, select a brew function to see if the error reappears.
If it does, ERR 2 indicates an internal error with the computer of the
warming plate. This may be covered under Kitchenaid's 1 Year Hassle
Free Warranty. I would advise you to call Kitchenaid Customer Service
to see what options are available to you. Repair is not recommended, as
it is not cost effective for the company or the consumer.
Their toll-free telephone number is 1-800-541-6390.
1. The drawer where the coffee grounds end up is not properly inserted. To fix insert drawer completely.
2. The tab on the left side of the drawer is broken off. To fix purchase an new drawer.
3. The drawer microswitch has a problem. There could be many reasons for this. The machine will have to be opened up to see whats wrong.
I called Miele hot line & here is the solution to fixed the problem... 800-999-1360.
Whenyou start the cleaning cycle, Don't stop the process by pulling the plug! Turnthe unit off from inside wait 5+ seconds & turn back on and thecleaning cycle should restart... If you do not use a cleaning TAB..Open& shut the LOOSE coffee Door under the drawer (Top Left) and thecycle will continue.
ok turn the machine on and wait till warmed up. Open door while machine is on and remove the dreg drawer. This you always need to do when the machine is on otherwise it will not reset.
flashing means dreg drawer steady means coffee beans