Question about Sharp Aquos LC-37GD6U 37 in. LCD HDTV

2 Answers

There is a 2 in the upper right hand corner of the screen.

The other day a 2 appeared in the upper right hand corner of the screen and I have been unable to clear it.

Posted by on

  • 2 more comments 
  • bongosophie Nov 27, 2008

    even after pressing the display button on the remote the channel goes away then comes back within a few seconds

  • Anonymous Dec 27, 2008

    Sam problem, pressing Display does nothing in my case

  • tphoenix Jan 02, 2009

    I have a Sharp Aquos 46" and a number 2 in a shadow box popped up in the top right hand corner after i installed a HDMI cable and mounted the TV on the
    wall. Wasn't sure if it was my cable or the TV until i turned of the cable box and the 2 was still up there. I hit display and reset the TV and nothing worked.


  • jenlevy Jan 18, 2009

    I Have the same problem after having installed cable HDMI with the sharp 32". tried everything via both cable and tv remote to no avail. Am using Time Warner Cable with Scientific Atlanta box

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

We had the same issue. Contacted Time Warner, and were instructed to reset the digital receiver by unplugging the power supply from the back of the receiver for at least 30 seconds. This will force the receiver to reset.

Fixed it for us. Big sigh of relief!

Posted on Jan 22, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 333 Answers

Look on your remote for a button that says display. press this button and the 2 should go away.

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I check my purchases so that I can find my voucher?


Hi Anne


On a computer: Select "my vouchers" in the upper right-hand corner of the page.

On a mobile phone: Select 'vouchers' at the top right-hand corner of the screen.

In the iOS app: Select 'vouchers' at the bottom right-hand corner of the screen.

In the Android app: Select the menu button in the upper left-hand corner of the screen and select 'my vouchers'.

From the "my vouchers" page of your account, you can also sort your vouchers by expiration date -- this is a convenient way to see which ones you need to use soon or mark a voucher as "used" to remind yourself that you've already enjoyed it!

May 01, 2016 | Cell Phones

1 Answer

HP Pavilion dv6 7040 TX Laptop screen on right hand upper corner turns dim and after some time becomes uniform


Being a led screen maybe one or more of them have gone bad
Or if you are lucky just a faulty lcd ribbon cable

Mar 25, 2014 | Computers & Internet

1 Answer

Garmin nuvi 1200 wont let me type the right letters


Try recalibrating the touchscreen. The procedure can be found here:

http://www.sharc.net/discus/messages/6/77.html?1315261162

Turn off the Nuvi. Place your finger on the upper left-hand corner of the screen and then push down on the power button to turn the unit on. Release the power button when the Garmin logo appears. Continue to press on the upper left-hand corner of the screen until you see the calibration screen.

Press each dot to recalibrate the screen.

Once completed the Nuvi will display Calibration Complete

Feb 28, 2013 | Garmin nuvi 1200 Car GPS Receiver

1 Answer

How to set the wr330 watch lost instructions.


On the face of the watch, there are four buttons arranged around the circle of the watch face in four positions. Starting with the upper left hand button (labelled SET), and working clockwise around the face of the watch (to ADJ., EL, and MODE), I'll label the buttons "A", "B", "C", and "D".

In other words...
Button "A" is the button labelled "SET" in the upper left hand corner of the watch.
Button "B" is the button labelled "ADJ." in the upper right hand corner of the watch.
Button "C" is the button labelled EL in the lower right hand corner of the watch.
Button "D" is the button labelled "MODE" in the lower left hand corner of the watch.

Setting the Time.
1. Press and hold D as if you were setting the alarm. As above, the stopwatch will momentarily appear and then after 2 seconds the alarm time will appear with the hour flashing.
2. Press and release D and the seconds on the time of day will begin to flash.
3. Press and release B to reset the seconds to zero provided they are below 30. If they are above 30, the seconds will reset and the minutes of the time of day will advance by one.
4. Press and release A to change from flashing seconds to flashing minutes/flashing hours/flashing day of the month/flashing month of the year/flashing day of the week. In each flashing mode, pressing and releasing B advances the value by one unit.
5. Press and release D to exit time setting mode.

Mar 16, 2011 | Armitron Digital Sport #45/6967PNK Watch

1 Answer

Can anyone offer any suggestions on how to delete/remove titles displaying in the upper left hand corner of my TV screen and right hand corner? For example, if I am watching a program on CITY, the title...


I believe the "Caption Vision" is selected. By pressing the "Display" button on the remote it should toggle through the choices until "Display Off" appears. That should be all.

Mar 05, 2011 | Sony KV-32S42 32" TV

1 Answer

When my daughter touches any object with the pen nothing happens. It will keep telling you to touch a picture on the screen with your pen.


You need to recalibrate. Try pushing B, A, Hint, and Home when you turn it on. Do not have a cartridge in the player or it will think it is a regular Leapster. Once it says calibrate screen it will say to press A, then wait until a target appears in the upper left hand corner, touch it and you should hear a sound, then a new target appears in the lower left hand, repeat actions, then lower right hand screen, and finally the upper right hand screen. If it stops at any time and doesn't get more arrows, try it again or turn it off and see if the pen works. It may take a few tries to get it to recalibrate correctly.

Jan 05, 2011 | LeapFrog LeapSter L-Max Console

1 Answer

Dell Latitude 620 has problem with screen .. static lines appear and upper right hand corner goes white or black


Sounds like your screen is taking a poop! Either that or the ribbon that goes to the screen is wearing out. Take to local pc repair shop.

Mar 29, 2010 | Dell Latitude D620 Notebook

1 Answer

A black _ in the upper left hand corner (size of underscore)


It is what we call a "Shatted Pixel" and you can fix it by flashing your screen

Dec 22, 2009 | Dell Computers & Internet

1 Answer

Looks like a crack in the display


such issues have occured in the Past, Please Check if the Crack appears in the BIOS mode.Safemode also Try another Monitor to find out if it is not the wall paper because if it is then the Crack will appear in the other Displa too...

Jul 17, 2008 | Computers & Internet

1 Answer

Sungale dvd2026


I found a "hack' to make mine work :)
1. Open the tray
2. Press "Setup": Menu Screen should appear
3. Press "8-8-8-8" ( if you changed the password, you might have to change it back to 8888 ) The region number should appear on upper right corner. No other notation. Typically just the numeral "1".
4. Use the right (->) or left (<-) arrow keys to change the region to 255 for all regions.
5. Use the up or down button to go to 3001 and 4000. I had to change 4000 to 4001 to get mine to work,
6. Press "Setup" to exit.
It was a big relief to find this hack, because I misplaced my receipt and thought I was simply out of $30.

Dec 09, 2007 | Philips DVDR725 DVD Player/HDD Recorder

Not finding what you are looking for?
Sharp Aquos LC-37GD6U 37 in. LCD HDTV Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73159 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...