Question about CIPHERLAB 1000 Handheld Barcode Scanner

1 Answer

Extra zero I have a cipher lab 1000 CCD Barcode Scanner. When scanning products with 12 digit upcs it adds a zero in the front how can I program the scangun to not to add that extra zero Here is an example this what I want 700407242637 this what I get 0700407242637

Posted by on

  • lattina Dec 12, 2008

    I have exactly the same problem! Any help would be greatly appreciated!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The default setting for this scanner is EAN13 enabled. This means that all 12 character barcodes will be changed to 13 characters by adding a zero in front.
How to Disable:

Open the manual that came with the scanner (it's available to download on the Cipherlab web page if you don't have it).
Find the UPCA Parameters barcodes (currently page 29). The next heading down is Convert to EAN13. You will see the disable and enable barcodes.

1) Scan Enter Setup Barcode (on practically every page of the manual at the bottom). The scanner will beep 6 times.
2) Scan the Convert to EAN13 Disable barcode. The scanner will beep once.
3) Scan the Update barcode at the bottom of the same page.

Your scanner should now read both 12 and 13 character barcodes correctly.

Hope this helps:)

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honeywell


Scan "do not expand ean-8 to ean-13" in your programming guide.

Jan 18, 2013 | Honeywell Voyager 1200g Barcode Scanner...

1 Answer

Symbol ls1902t-1000 scans extra characters when scanning a barcode


Download the quick start guide from support.symbol.com and reset to default by scanning the code from the PDF manual. This could either be a programmed ASCII prefix, or an error in the codes you are scanning. Have you seen the same problem with more than one scanner?

Oct 29, 2012 | Symbol LS1902T-1000 Handheld Laser Barcode...

3 Answers

Im trying to get my ls2208 scanner to read comic book barcodes its 13 plus the 5 digit extension can i get some help with this. im running windows vista 64bit not sure if that matters or not.


Just take a Print out this PDF file and Scan the Barcode
1st u need to scan the enable Interface Barcode then Scan Any barcode Length

Cheers
Hope its solves
9_30_2011_11_17_41_am.jpg

Sep 05, 2011 | Symbol LS2208 Handheld

2 Answers

My scanner reads only12 numbers not 13 numbers from barcode what h do?


Perhaps you should ask for replacements and ask for a bar code scanner who reads 13 numbers because even how many times you try it over and over again if the function of the scanner is limited in reading 12 number the results will be the same..Hope it can Help you.

Jul 02, 2011 | Metrologic Instruments 9520 Voyager

1 Answer

I need to strip the last character from the barcode when scanned with a Symbol P370 scanner. Is there a procedure for that?


If the barcode is a UPC-A or UPC-E you would scan the Do Not Transmit UPC-A or UPC-E Check Digit barcode from the P370 Product Reference Guide.

If the barcode is something other than a UPC-A or UPC-E the last character can be stripped using Advanced Data Formatting which would require the use of 123Scan. You can download 123Scan from support.symbol.com.

The P370 is NOT supported by the newer 123Scan2.

Jan 21, 2011 | Symbol P370 Wireless Barcode Scanner

1 Answer

I have an IT3800 scanner and use it in a gift shop. My products have "regular" barcodes, those with 5 digits added and ISBN barcodes. My scanner stopped scanning the extra 5 digits. I went to the IT3800...


What you need is to turn on Digit Addenda for the types of barcode you are trying to scan. Here is the user's guide:
http://www.geoti.co.kr/DATA/hhp/IT3800_3900%20Users%20Guide.pdf
Please check page 7-30, where you will find the codes to turn on the supplements for EAN 13 barcodes (those with 13-digit). Also, if you don't want the scanner to insert a space between the main code and the additional digits, you have to turn off addenda separator (page 7-31)
There are similar configuration codes for other symbologies (like UPC A) throughout the manual.

Hope it helps!
best regards!
Rafael

Sep 01, 2010 | HHP IT3800 Handheld

2 Answers

Casio TE2200 with Cipher 1000 Barcode scanner still not working


I have set up the casio 7000 to use a metrologic orbit scanner. The scanner program is most important. I don't know what Cipher uses, but I think that is where your problem is. I will do some more research and get back to you.
The 9789745002500 is correct you will use a 13 digit number

Sep 23, 2009 | Casio Parts Cash Register PC Desktop

1 Answer

I would like 2 know the model number/name of a barcode reader , also want 2 convert the 12 digit to 13 digit reading


If you want a cheap but reliable scanner try the LS1203 by Motorola (formerly Symbol) with any Symbol scanner to convert a 12 digit UPC into a 13 digit number you scan the UPC-A Enable System Character Country Code from the appropriate Product Reference Guide. The guides can be found at: http://support.symbol.com/support/supportcentral/supportcentral.do?id=m1

Hint: When searching change the Document Type to Product Manuals before hitting enter or clicking Go to reduce the search results to relevant documents.

Jul 07, 2009 | Symbol Computers & Internet

3 Answers

Ean 13 problem


you are probably reading to a inteligent software package like Excell, which sees the inputted data as a number (so ignores leading zeros) you need to specify to the sytem that the incoming numbers are TEXT not numbers.

Sep 30, 2008 | Symbol LS2208 Handheld

Not finding what you are looking for?
CIPHERLAB 1000 Handheld Barcode Scanner Logo

1,645 people viewed this question

Ask a Question

Usually answered in minutes!

Top CIPHERLAB Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Tom Chichester

Level 3 Expert

30678 Answers

Brett Duxbury
Brett Duxbury

Level 3 Expert

3297 Answers

Are you a CIPHERLAB Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...