Question about Crime Stopper Crimestopper EZ-95FM EzeeStart 2-Way FM/FM Remote Start System w/5-Button R

1 Answer

My aunt's car has an ezee start remote for it that stopped working. i replaced the battery but it still isn't working. i believe it needs to be reprogrammed to work again but i can't find any info on how to do that. can you help? it is a 4 button remote with "ezee start" written at the bottom on the front and at the bottom on the back "fcc id:chx433tx" is written. buttons are all blue and there are 2 buttons on the right side in addition to the 4 in the front. thanks for your help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

Go to crimestopper.com and go to manuals and click on the remote start that you have and you can download the manual and follow the transmitter programming.

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ezee start


You dont mention what car or model it is but some windshields incorporate the antenna array in and arround the glass,some car models use this antena to transmit other signals to devices throughout the car.might want to check to see if the old window had a built in antenna,its possible it might be just disconnected,good luck,Gary

Oct 29, 2013 | Vehicle Security Systems

2 Answers

I am not sure if my AudioVox APS95BT2 2-Button Code Learning Remote is the reason my car wont start. Yesterday, the remote stopped locking the car and then today my car wouldnt start and I am not sure...


If the remote is not working, then disarm the alarm manually. Turn the ignition on and press and release the valet switch one time. You should hear two chirps from the alarm. Start the car. If the car starts then replace the remote battery. If the vehicle fails to start after disarming the alarm then there could several other issues. Does the vehicle attempt to start, i.e. clicking from the starter, motor tries to turn over, etc.? Does the car battery have the power to start the car?

Sep 22, 2010 | Audiovox Car APS95BT2 2-Button Code...

1 Answer

Have an ezee start remote starter which, honestly, has never worked 100%. It seems very temperamental; one day it works and the following day it doesn't.


take it back to where it was put in, any good installation place will try to fix it for free, at least that's what I do

Jan 07, 2010 | Crime Stopper Crimestopper EZ-95FM...

2 Answers

Replaced the battery in my car need to reset my viper alarm


Alarms are not supposed to shut down the engine while you are driving if it was installed properly. Could be another installed accessory or the car itself has a problem. If it was in anti-hijack mode, you would receive a warning like honking horn. You may have to visit a repair shop and maybe your local Viper dealer to have them take a look. DC

Nov 04, 2009 | Viper 5701 VIPER 5701 2-WAY ALARM w/REMOTE...

1 Answer

Ezee start 90 on 2000 intrepid,unlock feature does not work, can hear control box clicking with no effect, all other functions and remote start work fine. what can i do?


I am almost positve that your 2000 intrepid has one wire door locks, meaning there is one wire that goes to the factory lock module and is hit with different resistance values for lock and unlock. this is tricky. you have to find out what the two different resistance values are, and use two resistors inbetween the alarms lock wires, and the wire you hook to in the car. Stop by your nearest best buy, the guys in the install bay will probaly look up the info for you. I know I would at my shop.

Aug 15, 2009 | Crime Stopper 4-Button Remote...

1 Answer

Viper remote stopped working 791xv


I have the same remote and it comes disconnected in the battery section from the battery hitting it and then the commands and speaker stop working
as shown here
bf76e1a.jpg

Mar 18, 2009 | Viper 791XV The 791XV is a 2-way Security...

1 Answer

I have a car fitted with a Clifford GS 470 alarm but I cant get the alarm to stop. The car that this alarm was fitted in has not been started in 5 months and so the battery ran flat. I replaced the battery...


you might have to replace the batteries in the remotes. The reason why the alarm is going off because once you plug power back to the alarm brain it sets the alarm off and the only way to make it stop is to hit the unlock button the remote. Make sure all connections on the alarm brain are good and try changing the batteries in the remotes. also might have to reprogram the remotes to the brain if it has been sitting for awhile.

Feb 16, 2009 | Vehicle Security Systems

1 Answer

Ezee start remote stopped working


if you have the manuals look under transmitter programming. if not go to crimestopper.com and look under manuals and you can download one from there and follow the steps into reprogramming the transmitter.

Nov 26, 2008 | Crime Stopper Crimestopper EZ-95FM...

Not finding what you are looking for?
Crime Stopper Crimestopper EZ-95FM EzeeStart 2-Way FM/FM Remote Start System w/5-Button R Logo

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crime Stopper Vehicle Security Systems Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

John
John

Level 2 Expert

473 Answers

Steve
Steve

Level 3 Expert

688 Answers

Are you a Crime Stopper Vehicle Security System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...