Question about Denon AVR-1100 Receiver

1 Answer

How do i reset AVR-1100 - Denon AVR-1100 Receiver

Posted by on

  • adfaccone May 28, 2012

    There is no circuiut Breaker and i dont have a manual and cant download one.

  • adfaccone May 28, 2012

    and it says protect can you help me out there

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 448 Answers

On the rear panel of the AVR-1100, there is a hexagonal point of contact which is called "Circuit Breaker". On the "Circuit Breaker", you can find the Reset button. Press and hold the Reset button to reset the device.
Ensure that all the excessive loads to the AVR-1100 are disconnected prior to resetting it.

Posted on May 28, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Denon AVR1603 RESET


Starzy, to reset on a Denon AVR-1603
  • power off the unit using the front panel Pwr switch
  • press and hold SPEAKER A and B buttons;
  • keep pressing on the speaker buttons, switch on the AVR
  • when the display is blinking release buttons Check the attached links,instruction and guides, Good luck
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.avsforum.com/forum/90-receivers-amps-processors/1386123-help-denon-avr-1603-shuts-down.html
Denon AVR 1603 Operating Instructions Manual Last Function Memory...

Jul 24, 2016 | Denon Audio Players & Recorders

1 Answer

How to reset denon avr 1913


Is thereany sign of power? relay click or anything?

Jun 07, 2014 | Denon AVR 1913 71 Channel 3D Home Theater...

2 Answers

What will factory reset avr 1709 fix


It will not fix any problems with it, It just sets it back to the way it was before you set it up.

Dec 04, 2012 | Denon AVR-1708 Receiver

1 Answer

I have lost the remote controller, avr 1100 when turned on, is in standby mode, so i cant do anything if its possible to turn on whithout remote controller ?


If it's not malfunctioning, yes. There's a power button labeled On/Standby/Off. Walk over and touch it.

Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on.

Overloads can be from excessive periods of high output or marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up.

You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.

If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.

If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'nekkid'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced and competent hands-on tech.

Check for loose speaker connections at the speaker as another possible root cause for intermittent shutdown.

The remote, should you decide to get one and make the receiver usable, is an RC-841. There are three on eBay right now.


Sep 07, 2011 | Denon AVR-1100 Receiver

1 Answer

Nothing in the display and standby light blinks


Same problem happened to me take off the cover and check all the fuses one of mine was blown now it works fine.

Aug 16, 2011 | Denon AVR-1100 Receiver

1 Answer

Denon AVR older receiver but worked fine; now


Did you try to reset the unit? Resetting the unit has fixed every problem I have ever had......turn off unit.....hold down A+B at the same time then turn the unit back on...hold buttons for roughly 3 seconds....Let me know if it works.

Aug 20, 2009 | Denon AVR-1908

1 Answer

Control other devices connected to Denon AVR-1100


No you can't use this remote to control other devices unless they are Denon devices. This is not a learning remote

Jan 24, 2009 | Denon AVR-1100 Receiver

1 Answer

Denon AVR-1100 receiver "PROTECT" mode


replace all the electrolytic capacitors in the power supply. i had the exact same problem with mine and once i replaced the capacitors it powered up and stayed on and worked perfect.
these capacitors tend to fail as they're of poor quality.
this fault is very common on denon receivers, especially the later models.

hope this helps?

Dec 25, 2008 | Denon AVR-1100 Receiver

1 Answer

Denon Avr-1803- multiple room audio difficulties!


it is true pre amp check your cables and confirm in (avr-1100)that you select the right input.

May 27, 2008 | Denon AVR-1803 Receiver

1 Answer

Says protect


Probably some speaker wires got shorted or the output stages freaked out and the cpu went into protect mode. Normally plugging it out of and in to the wall socket should/could reset it.

First check all wiring at the speaker outputs and on the speakers
then if it still wont startup you could try the avr-1500 method with
some trial and error pressing of buttons.

avr-1500 reset method:
Unplug the unit from the wall, hold down both video select and audio select at the same time, plug it back in. Keep holding both buttons for 2 secs, unit will reboot. As you have no audio select button on your avr-1100 you might try pressing video select and another key to see if this will reboot it.

Jan 13, 2008 | Denon AVR-1100 Receiver

Not finding what you are looking for?
Denon AVR-1100 Receiver Logo

Related Topics:

1,009 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Morne Olivier

Level 2 Expert

257 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...