Question about Jenn-Air JGD8130 Gas Cooktop

1 Answer

Jenn-Air JGD8130 Gas Cooktop will not ignite. Electronic pilotless ignition 'clicks' but will not ignite the flame. Have removed and cleaned the elements, still no luck.

Posted by on

  • 2 more comments 
  • bill-jan Feb 08, 2008

    igniters click but do not spark

  • mjg17 May 06, 2008

    On e burner of my cooktop will not light. All 3 others work normally and all 3 spark when I turn them on. The non-working one does not spark. I have cleaned the port under the mechanism but it still will not light.

  • susansarah May 27, 2008

    I have the same problem. The right side rear quit igniting first, now (a few months later) the right front has stopped. the part is 200.00, way too expensive for this part. i have done everything the manual says to fix it , still- no success.

  • Anonymous Mar 23, 2014

    Have a gas Jenn Air cooktop where the flame flares up sporadically normally while cooking on that particular eye.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just ordered one of these---sounds like people are not happy with this model---please get me more info

Posted on Mar 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do Jenn-Air cooktop igniters click when the exhaust fan is on med-high and the burners are on low flame setting ? ?


Igniters sense flame temperature, and if the fan cools the temp sensor down, your cooktop thinks the flame has gone out, so it clicks to reignite it.

Sep 02, 2014 | Jenn-Air Cooktops

1 Answer

Burners will not light; there is no sound of the ignitor either


Hi,
Here is a tip that I wrote to give details about why your cooktop will notspark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

Aug 12, 2011 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

When one burner knob is turned to ignite all four burners turn on.


What do you mean by "all four burners turn on"
Some electronic ignite systems turn on on all the burners, But just the SPARK not the gas part of the burner.
Is this what you are describing?.

Jan 11, 2011 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

THE IGNITOR WILL NOT CLICK


Reading from your description it sounds like your have a bad igniter switch and needs to be replaced.
Have a great day!

Dec 14, 2010 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

Hello. When I turn on a burner, another one


they will all click when lighting,
if this is happening after ignition, turn your flame just a bit higher, your loosing flame ground

Oct 03, 2009 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

Ignitor click and sparks, but no flames


there are two small holes at the base of the burner where the pipe goes up to it but doesn't touch. i had the same problem and it turned out that these two holes were clogged. i just straightedend a paper clip and solved the problem

Aug 29, 2008 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

Jenn-Air JGD8130 Gas Cooktop


grab hold of the installed burner cartridge at he top of unit and pry up slightly, should lift up without much effort, if not try lifting front side. they jsut lift up and slide back in no screws hold them in place

Feb 21, 2008 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

Jenn-Air JGD8130


The problem is the pot(s) is too far from the heat. Jenn-air needs to make a burner cover that is closer to the burner for boiling water...

Nov 08, 2007 | Jenn-Air JGD8130 Gas Cooktop

6 Answers

Igniter will not turn off once burners are lit.


I've had the same problem for 2 years. Today I removed the four burner tops, the 15/16 inch bolt that holds the burners in place, took everything apart (simple connections underneath), completely cleaned and dried eveything. I also cleaned the 4 knobs and making sure the 4 swiches slide up and down freely then dried everything with a hairdryer. Is now works fine but if the problem comes back, I'll simply unplug the cooktop and light it manually. P.S. I stripped one of the large 5/16 inch bolt that had become weak and brittle. - Try using water or some liquid to loosen the bolts as necessary. Good luck, CHEERS!

Oct 13, 2007 | Jenn-Air 30 in. CCG2423 Gas Cooktop

Not finding what you are looking for?
Jenn-Air JGD8130 Gas Cooktop Logo

Related Topics:

993 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Paul Carew

Level 3 Expert

3328 Answers

jason

Level 3 Expert

905 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...