- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need standard HDMI only if your laptop have HDMI port. I think hp 6510b not include HDMI port. It has VGA and SVEDIO Output. Your toshiba TV have many PC INPUT Ports such as S-Vedio, D-sub , VGA like old Desktop PC connection with Projector). So buy VGA cable or S-vedio Cable, then you can connect.
Decide if you want to watch the television on your computer
or use the TV as a larger monitor. If you want to view the contents of
the TV on your laptop, you need a video card connected to to the
computer. These cards can either be inserted through the express PCI
card slot on the laptop, or via USB cable. Make sure the video tuner
card supports component video.
Connect the DVI-to-component cable into the DVI port if you
want to use the TV as a large monitor for your laptop. However, if you
have a VGA port, plug the VGA-to-component cable into the VGA port.
Plug the RGB component cables into the component side of the
DVI- or VGA-to-component cable. If you want to watch the TV on your
computer, insert the RGB cables into the TV video card.
Plug the other end of the RGB component cables into the TV.
If you are using the TV as a monitor, plug the cables into the
"Component In" ports. However, if you are sending the TV signal to the
computer, plug the cables into the "Component Out" port (the other end
of the DVI- or VGA-to-component cable that you connected to your
computer in Step 2).
Power on the TV. If you are using the TV as a computer
monitor, press the "Video" button until "Component Video" appears on the
screen. If you are watching TV on your computer, launch the television
viewing software that came with the TV tuner card. You can now see the
contents of the TV on your computer.
You can use either an HDMI cable or a VGA cable to connect your computer to your TV. Your computer has both HDMI and VGA ports. You can use either ports but you cannot use both or else your video card will crash.
The price difference in the cables are what type of metal wire that is in it. One might have copper or even gold plated and the lower price one might have some low end metal. I have not seen any difference. Yes, all you have to do is plug it in and Windows 7 will recognize your TV. You might want to go into the Control Panel and open Sounds and make sure you have the audio turned on for your HDMI connection. Your laptop screen and the TV will be displaying the same.
Youre laptop would have to have a video card that has a TV-out port... And for that you would have to run a S-Video cable from the TV-out port of your laptop to the S-Video port on your TV... I assume your TV has a S-Video port?
Hi, You need s-video cable or VGA cable (if VGA ports are available on your laptop and TV) to connect your laptop to the tv.Connect the one end of your cable to your laptop port and another end to the tv port.and then set your tv to s-video mode.
S-Video - This is probably the most common method out there currently because an S-Video cable is cheap as heck and just about every TV under the sun has a S-Video port. You’ll have to make sure you laptop is equipped with this port. Remember, there are two types of S-Video cables: 4-pin and 7-pin. Most laptops and PC’s are equipped with a 7-pin port, so if your TV only has a 4-pin S-Video port, then this method will not work.
you can get s-video to scart connections;and if youve no scart you can connect s-video to phono....thats ur red,yellow n white audio / video plugs.yellow=video...white/red=left/right audio.
if you download a service manual it shows the pinout for s-video connections making it able to connect phono's.you only need the yellow and either red or white cos pc only outputs mono to tv.
there are also wireless systems you can get though never tried them.
you could also connect to another monitor,just plug the monitor into the back of pc(ext)only go into on place one way so no prob there.if no picture on ext monitor u need to switch screens
(alt+f 4)usually.press together once switches to ext mon,press together again enables both screens,and again returns to pc.