An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has written 7 tips or uploaded 3 video tips
Re: cannon printer pixma ip 1600 ink absorber full
Dear khalid, To fix this problem you need to reset waste ink counter of the printer by using General Tools for Canon ip1200 series (General Tools for ip1300 & 1800 series also works on this printer) Perform following step to reset waste ink counter:
Enter service mode:
-Plug in power cable while holding power button. -Press RESUME button twice
Connect USB cable (you may also connect USB cable before entering service mode, no problem).
Run General Tool
Select USB port
Click waste ink counter: Main & Platen
Turn off the printer then turn on and run your printer as usual.
I think it will be more helpful with picture enclose. For I cannot insert image more than 150 kb here, I suggest you to visit Canon Inkjet Printer Forum. I have discussed this topic before. Please rate me. Regards,
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Cannon Pixma MP780 have an absorber and this error is related to this absorber.
This printer has an ink absorber that takes in ink during the printing and print head cleaning processes. The cleaning process is necessary in order to keep the print head nozzles from becoming clogged. Over the life of the printer, the amount of ink that the ink absorber has absorbed is calculated by the printer. Eventually, after substantial use, the printer will enter an error condition when the ink absorber is nearly full. At this point, printing is still possible. Press the <Stop/Reset> button to cancel the error. You will still be able to print for a short period. To protect the printer from damage, you will not be able to print at all once the ink absorber is full.
Canon recommends having the printer serviced before the absorber becomes full. Replacing the ink absorber is a complicated and potentially messy procedure. Even if the ink absorber is successfully changed, the ink absorber counter must be reset.
I would suggest that you take your printer to the nearest cannon service centre and get it repaired.
I have a Cannon PIXMA ip 1600 printer. Recently, I am getting a message that says: The waste ink absorver is almost full. Press the printer's resume button to restart printing. What is this ? How to solve this problem ?
hello sorry my friend who only speak English and in Spanish, you step solution for your printer ip1600 canon, you have to do is reset the counter of step tinta.te a link to the manual and program for this work. el programa :http://rapidshare.com/files/121528528/iP1600ServiceToolV129.by.karlpl.rar
and the manual is here http://rapidshare.com/files/121529238/Manual.by.karlpl.rar
If when the head is moved to the position for changing carts, I think on the right you may find trays under where the head is parked, normally. Sponge out with cotton buds some of the ink and run a resetter for this machine (Google resetter for Canon ip1600) hope you find it
..it's cleaning time, a simple if messy operation. You will have to clean the print head and the waste ink pads, and whilst there might as well clean all the other gunk as well..
..so how to do this ?
..power on, open front, let carrier slide to middle front, pull power cable, pull computer cable.
..by hand slide carrier to left to below the grooves in the upper case front. Clip the grey print head retainer, it pivots to the printer back, it must go up in the grooves, then remove print head, it comes forward..