Question about Sansui HDLCD3210 32 in. LCD TV

1 Answer

Sansui san3201 green light but not swiching on

Posted by on

  • Anonymous Nov 29, 2008

    Need help with the same problem

  • Anonymous Jan 17, 2009

    I have the same lcd and mine completely has no power.Looking at getting it fixed don't hold much hope that its worth it.i will in future stay away from sansui,heard they arent very good brand they apparently are made in china and then branded with the sansui name.

    Also try turning main switch at back of tv.Im sure you have already done so.


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If some one have sansui lcd san3201 no power.i can fix for it.I am in 0413015684 frank

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Sansui HDPDP4200. It will not turn on. I did notice a green flashing led inside the back. Any Suggestions? I am also in the market for a schematic for it but have not been able to locate one

More than likely a power supply board issue. Unable to supply the correct voltage. If you can find out how many flashes the power light goes on/off. This is a key information to know what diagnostic it is giving you. Plasma's could be trickey as it could be the power supply or an Inverter board to try and power up the plasma screen.

Dec 07, 2014 | Sansui Flat Panel Televisions

1 Answer

How do i open my sansui hdlcd 4050c tv?

What are you going to do after opening it? If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
Disassemble procedure to many popular brand TVs are given with illustrations.

Jul 24, 2014 | Sansui Flat Panel Televisions

1 Answer

My sansui hdlcd1955e i can turn it on but it goes blank it still shows the green light on but it wont let u do anything i try to chagne the chanle but it wont let u

Only a green screen is a bad symptom. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
Screen shots to defective LCD panels are given. You can compare it to that of your TVs'.

May 11, 2014 | Sansui HDLCD1908 19 in. LCD TV

1 Answer

How do I swich my tv from analog to digital?\

consult the owner manual of your set.

May 28, 2012 | Sansui 19 in. LCD TV

1 Answer

Hi, I own a Sansui HDPDP4200 42 inch Plasma and recently it stopped powering up....When you hit the power button, the green light comes on for about 2 seconds then shuts off - No audio or video persent...

We are having the same problem with ours, the power won't turn on with remote or button on TV. Advice on here was leaking capacitator needs to be replaced. We haven't had it repaired yet but figured I would pass this along to you.

Dec 05, 2010 | Sansui HDPDP4200 42 in. HD-Ready Plasma...

2 Answers

I have a Sansui LCD 32'' TV model no.SAN3201 that was damaged in a power surge. What is a similar brand to replace the TV?

You can try Hisense, but really flat screens are getting pretty cheap. Try Craigslist, I got my LG 32" LCD for $300 and it's dam near brand new. Sometimes you can and will find good deals on there.

Aug 06, 2009 | Flat Panel Televisions

1 Answer

My remote control stopped working and i can't find a universal control that will work with my sansui SAN3201 32 in LCD TV, can anyone help? Is it reapirable or does anyone know a remote control that will...

Can you let me know if you still have this remote control. Mine has buttons busted too but if you cant use yours...can I have it please for parts?
This Tv is not up to much by todays standards anyway and most people are just chucking them out now.
What will you do with yours I wonder?
Pls email me at I am at Logan south of Brisbane.

Regards tminbox

Mar 25, 2009 | Sansui HDLCD3210 32 in. LCD TV

1 Answer

Do you need set top box for digital for SANSUI SAN3201-what is HDTV channel for?

yes you need one for clear correct reception

Please don't forget to rate me "FIXYA"...thank you!

Mar 19, 2009 | Sansui HDLCD3210 32 in. LCD TV

1 Answer

No audio

I will try to explain this clearly.

Make sure that there is sound leaving from the connections on the top box.

Check that the audio cables are connected to the associated audio input for the video at the rear of the set. Make sure that there are no other shared inputs for the same input. With shared inputs, only one can be the default reference for input.

Check the menus in both the top box and the TV set to make sure that all setups are correctly done.

Jerry G.

Apr 13, 2008 | Flat Panel Televisions

Not finding what you are looking for?
Sansui HDLCD3210 32 in. LCD TV Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sansui Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides