Question about Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Busy signal while taking a picture

While taking a picture my camera will say BUSY on the LCD screen..what does that mean...it will not let me take the picture...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

Have you been taking shots in continuous mode (burst)?  The camera has a built in buffer of fast memory where photos are stored before being written to the slower CF card.  Once the memory gets full the camera will not take another picture unless some of the images complete transfer to the CF card. You will notice a number inside your viewfinder (bottom left) the number goes down when you take a picture that is how much space is left in the buffer when it hits 0 the buffer is full it will go up as the buffer clears.  Note that RAW takes up more space and fills the buffer quickly.
If you get the "Busy" message even after just 1 shot then there is something wrong with either your CF card or your camera and you should take try another card or it to canon for service.

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Busy signal after taking a photo what does this mean


Some cameras, especially point and shoot models, have to write the picture you just took to the cameras memory card or internal memory. The busy light comes on as this happens to let you know there will be a wait and that you shouldn't turn off your camera until it is done.

Oct 20, 2014 | Digital Cameras

1 Answer

Busy shows up in the screen not sure what this


is it all the time or only just after picture is taken? busy means that it's processing something, if it's shows for a while and then disappears that is OK.

Sep 24, 2013 | Digital Cameras

1 Answer

Canon busy signal busy signal after take a picture


b10909f.gif

2364a9a.jpg

I can help you fix the BUSY Error or Error 99 of your Canon EOS Rebel XS / Canon EOS 1000D.

Installation of this Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update will solve these problems:
  1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the BUSY indication remains lit in the viewfinder.
  2. The message, "Err 99 Shooting is not possible. Turn the power switch to<OFF> and <ON> again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out,the LCD monitor displays in a language that is different from the actual language setting.
See the firmware instructions and download the firmware upgrade by following these Fixya Tips :

  1. Follow this link to download a pdf version of the firmware installation instruction guide.
  2. Follow this link to download the Windows Version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  3. Follow this link to download the MAC version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  4. Follow this link to download the Canon EOS Rebel XS / Canon EOS 1000D Instruction Manual.

I hope that helps.

Dec 26, 2009 | Canon EOS Digital Rebel XS / 1000D IS...

1 Answer

Canon Rebel XS displays busy signal after I take a


Is your card nearly full? Is your battery fully charged?

Dec 19, 2009 | Canon EOS Digital Rebel XS / 1000D IS...

1 Answer

Canon EOS - no data on LCD and viewfinder says busy


b10909f.gif

2364a9a.jpg

I can help you fix the BUSY Error or Error 99 of your Canon EOS Rebel XS.

Installation of this Canon EOS Rebel XS firmware version 1.06 update will solve these problems:
  1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the BUSY indication remains lit in the viewfinder.
  2. The message, "Err 99 Shooting is not possible. Turn the power switch to<OFF> and <ON> again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out,the LCD monitor displays in a language that is different from the actual language setting.
See the firmware instructions and download the firmware upgrade by following these Fixya Tips :

  1. Follow this link to download a pdf version of the firmware installation instruction guide.
  2. Follow this link to download the Windows Version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  3. Follow this link to download the MAC version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  4. Follow this link to download the Canon EOS Rebel XS / Canon EOS 1000D Instruction Manual.

I hope that helps.

Nov 04, 2009 | Canon EOS Digital Rebel XS / 1000D IS...

1 Answer

Canon XSI showing "busy" when taking multiple shots


It can be that your batteries are low and takes longer to charge the flash... It can also be that your memory card is a slow on. If the red processing light on the back of the camera is staying on a long time, it means the camera is having trouble feeding the picture to the card... You might try decreasing the picture quality a little...

Jun 12, 2009 | Canon EOS Rebel XSi Digital Camera

1 Answer

Canon 40D LCD Wont come on buSY flashes in view finder


Okay, this is simple. Your camera can take several pictures at one time in a burst. However when you release the shutter button your processor takes a second to actually SAVE the pictures to the card in the camera. One thing than has helped me in my wedding photography business is to buy the fastest speed cards I can find. It significantly reduced my "busy" time.

Nov 30, 2008 | Canon EOS 40D Digital Camera

1 Answer

Lcd screen shows data but no picture


The more professional models of the Canon Rebel are designed to by used by looking through the viewfinder and not at the screen. The screen is for reviewing pictures and setting information.

Mar 18, 2008 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Getting "busy" display on all modes except no-flash mode...


The "Busy" code will be on when the camera trys to use a flash and waiting for its charging action. Upon completion of charging the mechanism returns a signal to the camera to fire the shutter.

That means now your camera has something wrong on the flash unit and the camera waits for some certain time frame to finally determine it cannot complete a photo-taking command.

An "ERR 99" denotes that this kind of error has not been encorded explicitly and needs investigation services.

Dec 17, 2007 | Canon Digital Rebel / EOS-300D Digital...

Not finding what you are looking for?
Canon Rebel XT / EOS 350D Digital Camera Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...