Question about Audio & Video Receivers

1 Answer

Radio problem I have a 1998 chevy tahoe with the stock radio in it. When I strart the truck and turn on the radio the radio comes on but does not have any sound. If I open a door the radio sound will come on and continue to play when I close the door. If I turn off the radio for a few seconds and turn it back on no sound will come out again and I have to open a door for the sound to come on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

The speaker wires are intermittent in the door because of faulty wire and the door opening and closing over time but the other side then must not work or if it comes on also after the door then there is a short to ground in the radio audio out wire in the door

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New pioneer FH-X820BS tiny to no sound


Most car audio is designed to push 4 ohm speakers not 8. Any chance the stock radio was attached to an amp that is not powering up with the new deck. Usually you will have a remote turn on wire that signals any amps to fire up when the deck does.

Jul 04, 2016 | Pioneer Audio & Video Receivers

1 Answer

My bose stereo in my 05 tahoe comes on but no sound, what's wrong


Try using a CD cleaner to clean the optical lens which may have gathered some dust.

Feb 15, 2013 | Bose 2003-2005/2006 Chevrolet Tahoe...

1 Answer

Kenwood radio is saying "PROTECT"


i am sorry but you have to fix it on a good sentence

Sep 18, 2012 | Kenwood KDC-148

1 Answer

Sr576 standby light blinking


Most likely, you have DC Offset(a bad amplifier). The unit is shutting down to protect your speaker system, as well as protect the unit from any further damage. If you require more assistance, or would like to inquire about repairing your Onkyo, please visit my website at audioserviceclinic.com. You may contact me there. Thank you.

Jul 22, 2012 | Onkyo TX-SR576 7 Channels Receiver

1 Answer

How do i program my eton fr 800 radio to come on automatically. Thank you.


  • To get your alert radio to come on when there is a weather alert first you needed to find the right NOAH frequency to turn on automatically to.
  1. Extend the antenna fully.
  2. Turn on the radio.
  3. .Press the "WB" button at the top of the radio.
  4. Turn up the volume and press the ^ or v button to cycle through all 7 of the weather channels.
  5. WB and CH will appear at the top of the display., with 1-7 next to CH.
  6. Select the strongest channel you can hear (if you can hear more than one channel. Usually only one channel is heard).
  7. The strongest one is the broadcast from your area.
  8. Now adjust the volume you want the radio to turn on in the event of an emergency.

  • Now once you have the weather frequency set for the radio to turn on to, we need to make it able come turn on in an emergency.
  1. Press the ALERT/WB button at the top of the radio.
  2. The alert light shines in the upper left corner of the radio.
  3. The audio will disappear but the radio is still on.
  4. It will monitor Noah until an emergency occurs and at that point a siren or a voice will alert you. Then you press the WB button to hear the alert.


Regards, Tony

Apr 27, 2011 | Audio & Video Receivers

1 Answer

Looking for repair center near Belmont,Mass. ?? in need of a 50K Ohm Potentiometer and knob, the 50K Ohm is a part # 31190335 it is for a Peavey XR-600B


you might try Radio Shack for the pot, also a larger music store with or without repair dept, typically stock various pots like that, some with audio taper and some with linear taper Also if Radio Shack doesn't actually have it in stock they have an extensive parts suppy catalog in the store, also Allied Radio out of Chicago is another option, good luck

Mar 24, 2011 | Audio & Video Receivers

1 Answer

Entering my code 3 times wrong now its locked up.my car is a range rover 1998 .


put your key in turn to position 1 turn on radio you will see _ _ _ _ on display leave like this for 1 1 1/2 HOURS then radio will read enter code put in your 4 diget number in radio will come on you dont have to press anything else tuneyour radio in sounds great

Dec 08, 2009 | Harman Kardon AVR 635 Receiver

1 Answer

My cd player in my 2005 chevy malibu wont eject all it does is clicks


we have a 05 malibu. cd got stuck and displayed locked on radio. on the passenger side floor board is a fuse box. u have to pull the panel off takes about 10sec to do. find tha fuse that says radio its a 10A fuse. pull tha fuse out. put key in ignition and turn forward. put fuse back in and hit the eject button cd will come out.

Sep 07, 2008 | Audio & Video Receivers

1 Answer

RCA audio system,and three disc. autio radio works , but the three dicc player will not play any audio discs. I think the tuner is out of programing. Haveany suggestions. it is a am fm radio and compact...


I always encountered that kind of problem,the audio works but discs player not working.This kind of a problem of a disc player had three causes,first the lense is busted already secondly the MPEG MEMORY IC is busted,thirdly the roller that's moving back and port bringing the lense set stock up full of dirt this is most common problem.That why whateveryou did is not functioning.If you know how to open your unit it's better. First you do is to clean the roller with the use of a lighter fluid to take the old greases that already harden with dirt. After that all is clean put a first class greases type-A only little to the roller and wipe the lense with a cotton buds. If all this procedure nothings happens,you better change the lense with desame code number, to avoid conflict.If the lense is change still not functioning that's the time you change the MPEG memory IC.I assure it to you it's works 100%.

Jun 15, 2008 | RCA Audio & Video Receivers

2 Answers

Sound problem


Make sure all speakers that are hooked up sound ok. If any of them sound lower then the others or sound distorted you may have a speaker with a partially shorted voice coil. If speaker or speakers pop when power is first applied you may have a grounded speaker that should not be grounded. Each speaker wire rides on 6vdc and if any speaker sees a ground you will have 6v across voice coil which would explain any popping noise when first turned on and radio may play for awhile then overheat. be sure speakers are 4 ohm min per ch otherwise amp will run to hot. Just a few Guesses

Jan 13, 2008 | Denon AVR-1708 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...