Question about Sony KP-61HS30 TV

1 Answer

SONY KP-61HS30 Having picture problem. feels like its in 3-D without glasses on. also all text and picture is double like I am seeing cross eyed. and screen picture bend down in the middle. Any ideas??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 192 Answers

When one or all the colors are bending severly, then the convergence circuit is not functioning correctly and must be repaired. Only one color bending means just the convergence ICs and all colors bending means convergence ICs and voltage supplies. Convergence issues are the most common problem with rear projection (w/picture tubes) televisions. The cure is replacing the convergence IC's. Sometimes the pico fuses need replaced as well. If you have the experience to use a soldering iron and a basic understanding of electronics, then, you may be able to do this job. If not then call a servicer in your area. Go to the Sony website, Sony.com, and you can locate one in your area.

Posted on Jan 07, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I do a lot of nighttime driving and sometimes I feel like my eyes get very sore and it can become hard to see. Any tips?


Minimize the glare of car headlights by focusing on the bottom right hand corner of the road. Also you should flick your eyes occasionally from the road to the dashboard to try and minimize the risk of 'road hypnosis' which can be very dangerous and lead to accidents.

Also if you wear glasses, you can get an anti reflective coating on your lenses to also help minimize the glare.

Feb 13, 2013 | Health & Beauty

5 Answers

Picture in 3d without the 3d glasses


your convergence settings are moved and they need to be adjusted and if you adjust and still have the problem then its the problem of convergence STK ICS and they need to be replaced.

for adjusting the convergence please click this link this will help you how to adjust the red, blue and green settings in your tv.

http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html

for replacing the convergence STKics just click this link
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

feel free for further assistance.

thanks.

Oct 12, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Rarely used Tasco 3087GY Binoculars. The problem is that it feels like you are looking cross eyed when using. Each eye can be focused perfectly independently but when looking with both eyes, it's like...


EARTHS TRANSFORMATION INTO THE 5TH DIMENSION I WOULD LIKE TO SHARE WITH ALL THE OCCUPANTS OF MOTHER EARTH THE

REASONING BEHIND THE "DOUBLE SHADOW". MOTHER EARTH HAS BEGUN A

SERIES OF EVOLUTIONARY TRANSFORMATIONS, ONE OF WHICH IS

AFFECTING THE NORTH POLE, OR MAGNETIC POLE, THE REASON FOR THE

NOW "QUADRUPLE SHADOWS" IS THE EARTHS ROTATION SPEED. EARTH IS

PREPARING FOR A DIMENSIONAL SHIFT, FROM A 3D TO 5D. HENCE THE

REASON FOR BINOCULARS TO SHOW DOUBLE IMAGES, THEY AREN'T BROKEN,

THE "FUZZ" OR "FREQUENCY SNOW" ALL AROUND, VISIBLE TO CAMERAS,

RECORDERS ETC. THE SHADOW ENHANCEMENT AND VISUAL INTAKE OF SUCH,

ALSO SEEMS THAT BLURRY IS EVERYWHERE, IT IS NOT YOUR VISION, IT

IS THE MAGNETIC ENERGY , NOTHING SEEMS TO WANT TO FOCUS, SEEMS

AS THOUGH THERE IS A MIST OR FUZZY FILM EVERYWHERE. tHESE ARE

THE PHYSICAL SIGNS OF THE EARTHS NATURAL AND NECESSARY CHANGE.

NOW IS THE TIME FOR ALL TO FILL THE EARTH WITH LOVE, LIGHT

HAPPINESS AND INNER PEACE. I PUSH INTO ALL OF YOU , HAPPINESS,

JOY AND LOVE. lIGHT SHALL BEAM THROUGH AND AROUND ALL OF YOU

AND YOURS. POSITIVITY AND AWAKENING TO ALL WITH LOVE.


Jan 21, 2011 | Tasco Optics

1 Answer

I have to use reading glasses to use a simmons blazer rifle scope.....othewise the image is blurry.


You can't see the cross hairs or the whole picture is blurry? I know that the rear ring on the scope will bring the cross hairs into focus, glasses or not, and the scope itself should be clear all the way down, I can't see a thing either without glasses and it has really hampered my shooting. It ain't no fun , it's frustrating. Try turning the rear eyepiece, see what happens, hope this helps.

Feb 27, 2010 | Cabela's Cabelas Pine Ridge 3 X 9 X 40...

1 Answer

I am seeing a double image whel I look through my binocular.


Hi,

Most binoculars should allow you to grip the two sides and pull them closer together to fit the distance between your eyes.. Have you tried this?
What you should see is the two images come together to form one.

If you have tried this already and you still get the two images then it's possible the model is just too wide for your eyes.. If they're new you could try return them for another type that fit better..

If this works for you then here are the instructions for setting up the binoculars to give you the best result for your eyesight..


This is more common than you would think.. Here's how to set up a pair of binoculars to suit yourself.
Any good binocular will be able to do this and the reason is to allow you to adjust them for the difference in strenght between your two eyes. I wear glasses myself and sometimes contact lenses so it's good to be able to quickly adjust them.

1. turn the binoculars over so you are looking at the underside.
2. on the eyepieces can you see on one eye(usually the right eye) a little plus - minus marking. The eyepiece should be able to rotate a little to each side of this marking.
3. Set the rotating eyepiece to the middle setting.
4. Look through the binoculars as normal and bring the two sides together until you form the two circles that you see into one.
5. Pick an object app 10 meters away.
6 Presuming that the adjustable eyepiece is on the right hand side then close your right eye, look at the middle distance object you chose with your left eye and use the central focusing knob/wheel in the middle to bring your left eyepiece into focus.
7. Now, close your left eye and adjust the rotating right hand eyepiece while looking at the same object until your right eyepiece is in focus.
8. The binoculars should now be set for the differences in strenght of your eyes and you can use the middle focus control as normal.

Most binoculars have a soft rubber eyepiece that can be folded back for people who wear glasses but I, like most people I know who wear glasses, find it horribly uncomfortable.

This method allows you to set them for yourself and if someone else uses your binoculars you can quickly reset them for you.

Hope this helps...


- Oh yeah, sorry, forgot to mention.. This set up is so you can use them without wearing your glasses.. Much more comfortable!!

Oct 20, 2009 | Sharper Image Optics

1 Answer

The screen is doubled and pinkish blue kind of like 3-d screen


this is aconverson problum.
first tv-set menu open and select converson option select and see to screen CENTRL cross line in 2 or 3 colour [RED /GREEN /BLUE] hten set on your REMOT cantrol arow key or [ ch+ ch- v+ v-] up down to arow key an set all colour line is meching with centrel and see cross line is complitly waite an d seethe pictur is normal ...
if not converson seting facility in the menu system pls. set your tv-set with tech . he is set menualy sum time's

Oct 06, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Double vision in minolta binoculars


Hi,

This is more common than you would think.. Here's how to set up a pair of binoculars to suit yourself.
Any good binocular will be able to do this and the reason is to allow you to adjust them for the difference in strenght between your two eyes. I wear glasses myself and sometimes contact lenses so it's good to be able to quickly adjust them.

1. turn the binoculars over so you are looking at the underside.
2. on the eyepieces can you see on one eye(usually the right eye) a little plus - minus marking. The eyepiece should be able to rotate a little to each side of this marking.
3. Set the rotating eyepiece to the middle setting.
4. Look through the binoculars as normal and bring the two sides together until you form the two circles that you see into one.
5. Pick an object app 10 meters away.
6 Presuming that the adjustable eyepiece is on the right hand side then close your right eye, look at the middle distance object you chose with your left eye and use the central focusing knob/wheel in the middle to bring your left eyepiece into focus.
7. Now, close your left eye and adjust the rotating right hand eyepiece while looking at the same object until your right eyepiece is in focus.
8. The binoculars should now be set for the differences in strenght of your eyes and you can use the middle focus control as normal.

Most binoculars have a soft rubber eyepiece that can be folded back for people who wear glasses but I, like most people I know who wear glasses, find it horribly uncomfortable.

This method allows you to set them for yourself and if someone else uses your binoculars you can quickly reset them for you.

Hope this helps...


- Oh yeah, sorry, forgot to mention.. This set up is so you can use them without wearing your glasses.. Much more comfortable!!

Aug 30, 2009 | Minolta Activa Standard Zoom Binocular

1 Answer

Our tv is 10 years old toshiba cinema series it has blue and red


It will be 11 years next month that I've had my Toshiba 55H55 Cinema Series and have the same problem every now and then, if you haven't already done so, go to the picture settings and scrolling down to conversion and it will take you through 3 steps of adjustments,there is a white cross in the middle of the screen line up the red first and then the blue, it will then take you to a screen with numbers, ID the clearest number and exit out, you should have a clear picture again. I hope this helps.

Jan 06, 2009 | Toshiba 50H81 50" Rear Projection...

Not finding what you are looking for?
Sony KP-61HS30 TV Logo

Related Topics:

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...