Question about Frigidaire 24" Built-in Single Electric Wall Oven - Black (Special Order)

1 Answer

Error F3 on display ovens beeps

The oven will sometimes start but then go to the error and beep. I have read it is a temp sensor but were is it located. My oven is a Frigidaire Model FEB 2755ABA.  Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 338 Answers

The temperature probr is located inside your oven in one of the upper corners. it should be a round stick looking piece. some are removed from the front others are removed from the back.

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHEN MY WHIRLPOOL BUILT IN OVEN MODEL RBS305PRS00 IS BAKING IT SOMETIMES CUT OFF AND YOU HEAR A CLICKING NOISE AND IT WILL DISPLAY EO F3.I CAN TURN THE OVEN OFF AND IT WILL BEEP AND DISPLAY EO F3.AFTE


That's an oven sensor error. Replace the oven sensor. If you still have the error, check the wiring and/or replace the timer/clock board.

Good luck!

Nov 26, 2014 | Whirlpool Ovens

1 Answer

F3 beeping


Hi

F3 Error indicates a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.
Daniel

Aug 02, 2011 | Dacor ECS136-SBR Electric Single Oven

1 Answer

The oven reached a very high temperature and the digital screen read F1 and F3 at times and also beeped for sometime... could not turn the oven off so I unplugged it.. Not sure what F1 or F3 means...


Hello & Welcome to FixYa

F3 error code indicates an open/shorted oven temperature sensor and to solve this problem the temp.sensor needs replacement. If you want to be sure before replacing the sensor then you can test it with a voltmeter for around 1100ohms....if it reads more then this then it needs replacement however, if the reading is around or less then 1100ohms then it is the control board that needs replacement. Please get back to me if you have any other questions.


Kevin

Mar 28, 2011 | Ovens

1 Answer

GE single oven with touch pad settings. Getting error code F-4 after selecting any bake or broil function keys. Oven light works, fan for convection oven seems to be working. Makes no unusual noise. will...


Hi, the F2 error code means that the oven is overheating for an unknown reason. F3 and F4 indicate a problem with the oven sensor, which usually requires replacing the sensor.

Jan 21, 2011 | GE Ovens

1 Answer

Oven beeps and display read "F3". what does this mean?


Hi dpaulthomas,

The F3 fault code description is a shorted or open oven temperature sensor. The easiest way to resolve this error is to check the sensor harness and harness connection between oven sensor and oven control. If you noticed that the wiring is all ok, replace the oven temperature sensor (RTD).

Hope it helps.

Thank you for using FixYa.

Aug 31, 2010 | Maytag 24" Built-In Single Gas Wall Oven -...

1 Answer

Display reads " -F3-


Replace the oven temperature sensor. Unplug the range. Open the oven. The temp sensor will be in the top right or left of the oven.A short metal piece about half the size of a pencil. Remove the screws,pull it out carefully. Disconnect the wire plug. Reverse this order to install the new sensor.

Sep 14, 2009 | Frigidaire FEB27S5A Electric Single Oven

1 Answer

F2 and F3 code appearing along with annoying beeping


i think f3 error code has something to do with the temp probe maybe it is the problem. the temp probe is located if you open the door directly in the back wall. it looks like a prong. should read 1100ohms the f2 error code though usually has something to do with the keypad i would check all the connections maybe they are loose.

Jan 04, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

My oven displays F3 and beeps


f3 error code is generally a bad oven sensor. not every code is universal, but most manufacturers use the f3 error code to indicate a sensor issue. it is an easy fix if you want to tackle the problem yourself. Joe

Nov 18, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Kenmore Electric Oven Model 4088816 - Error Code F3


f-3 means the oven temp sensor is bad. replace the sensor and problem solved

Nov 25, 2007 | Ovens

3 Answers

Oven won't stay on and give an F error message


Disconnect the power. Disconnect the sensor harness from the control. Measure the sensor resistance (white leads). The resistance should be 1080 ohms at room temp. If the sensor is open the resistance is usually over 2900 and you get an F3 message. If the sensor is shorted the resistance is usually less than 950 ohms and you get an F4 error message. Also look for damaged harness terminals if not a bad sensor.

Aug 31, 2007 | Ovens

Not finding what you are looking for?
Frigidaire 24" Built-in Single Electric Wall Oven - Black (Special Order) Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...