Question about Chamberlain 950CB Remote Control

1 Answer

Need to program my chamberlain #953CB from a working gate opener

Need to program chamberlain opener for two gates?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

The chamberlin remote only work with a chamberlin reciever, if you have this it will be a silver box that looks like diamond plate material inside you operator, take of the front cover on this box and you will see a black button that says program push and hold this button down then push your remote button down while holding it close to the box you will see a yellow led flash and then it is set. if you only have a single button remote you will only be able to set it to one operator.

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I whant to program my remote its a wejoin for a sliding gate operator wjkmp201 to a universal remote


follow the programming sequence in the user manual for the gate operation
I suspect that the frequency range of the new remote and the gate opener operation may be different and it will not work but try it any way

Sep 01, 2016 | Universal Remote Controls

1 Answer

How to program a ET BLU MIX remote on a older type centurion d5 gate motor


Ask the shop what to do when their suggestion does not work.

Oct 02, 2014 | Remote Controls

1 Answer

Program a gate at gated community


You will probably have to speak with someone at the HOA that has access to the gate opener. That is the only way to be able to program anything to it.

Sep 27, 2014 | Chamberlain Device Remote Control 953EV

1 Answer

Centurion gate motor


These gates have the ability to adjust opening, closing distances and speed. Your manual has the instruction. I would recommend a qualified technician make the adjustments as you have to get inside case(where high voltages are located).

Mar 12, 2014 | Remote Controls

1 Answer

I got my centurion gate motor D3. the problem is when i press the remote an LED lights but the gate does not open, i opened the motor cover and there is no light nor sound from the motor. the gate can be...


Try to reprogram your remotes.... or replace the batteries even if the l.e.d. still works (it only takes half a volt to make the l.e.d. work but almost the full charge of the batteries are needed to send a working signal.

Oct 18, 2013 | Remote Controls

1 Answer

How to programme a nova 4 button remote on a gemini gate motor


It's important to know that the Nova remote controls are not compatible with the Gemini gate motor. In order to get these remote controls to work with your Gemini gate motor, you'll need to install a Centurion receiver first (see http://www.centsys.co.za/upload/product_link_files/CS37_Nova_Receiver_Instructions_1031.D.05.0012_4.pdf). Once the Centurion receiver has been installed on your Gemini gate motor, follow the programming instructions as per the leaflet that accompanied your brand new Nova remote control, or download the instructions from http://www.centsys.co.za/upload/product_link_files/English_Transmitter_InsertCS37_1031.D.02.0027_1_Nova.pdf

Feb 22, 2012 | Remote Controls

1 Answer

How do you program more than 1 side to the remote? We have a remote that 1 side is for a garage - but we need to program the other side for a gate...how can we do this?


The way to program the other button is the exact same as programming the first, just use the other button when you are pressing it until the light flashes like you did with the first. Manual is linked below.

http://download.homesecuritystore.com/downloadmanual.aspx?FileName=KLIK1_Install.pdf

Jun 24, 2011 | Chamberlain KLIK1 Remote Control

1 Answer

HOw do I program my Chamberlain 953CB remote with my chamberlain power drive garage door opener?


First make sure there is a new battery in the remote. Then press and release the colored learn button on the motor head. Then press the button on the remote. The light bulb should flash to let you know the code has been received. If the remote does not work after this either the remote or the logic board in the motor unit needs replaced. Thanks BB

Sep 10, 2010 | Chamberlain 950CB Remote Control

Not finding what you are looking for?
Chamberlain 950CB Remote Control Logo

1,172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chamberlain Remote Controls Experts

Raj Patel

Level 3 Expert

845 Answers

patrolcats

Level 1 Expert

14 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a Chamberlain Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...