Hi, my tv seems to be stuck on the av channel.
its a beko 28 in. Ive lost the remote and i cant access the menu without it
We have sky tv through a scart lead.
When I try to swap scarts to use dvd i have the same problem so its obviosly the tv
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: tv is stuck on av channel
The sky remote is very clever & can operate tv sets, To do this you need to enter the code for Beko tv sets.
Codes for all makes of tv can be found easily on the net & the instructions for entering the code will allso be found.
If you have the user manual for your sky box that tells you how to programe your sky remote to operate your tv & will contain codes for Beko tv sets.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I assume that since you do not have remote you cannot choose another AV channel on your TV. If so you can use the RF input using a RF converter to AUDIO /VIDEO or if not the sky input must be shared through a VCR/DVD or multimedia/DTS amplifier
You might try hitting the MENU button on the tv itself to see if you are able to select input / source that way. Some TVs also have the Aux Inputs selected by scrolling through the channels until you come to the aux inputs.
For many brands the way to find the a/v input is to use the channels buttons and go below channel 2 or above 125.
Or you might find it in the menu if you can access it.
Hope this help. Merry christmas
P.s please do not rate this answer (unless it helps) as it is only a suggestion.
If your connecting the likes of a DVD player, Virgin, Sky etc to your Tv via a scart. Then these should turn your tv onto the required Av channel automatically as a scart send power to the Tv.
Just make sure that you have everything connected up first of all before you turn the power on. Then what I would suggest you do is turn the TV on first then turn the DVD, Cable, Sky on after the tv is already on this should then change to the AV your appliance is connected to.
Hope This helps you out. Please Leave a thumbs up if this clarify things for you.
I turned the TV off. I held in all of the (4) buttons on the front of the TV and turned the TV back on again....this seemed to free up the remote control access and I was able to work the TV normally. The four buttons were the channel and the volume controls.