- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello if you have the remote and the unlock key number
Use the above link to the manual
If you don't have the remote you will need to get one as it is required to input the code
Need the code ask Kenwood ,the person you bought it from or take it to a local radio shack to get it read
setting the clock:
1. Press the DISP and by press and hold for more then 1 second.
2. Press the >>' to adjust the hour.
3. Press the '<< to adjust the minute.
checking the clock:
You can see the clock pressing the DISP (DISP. on the remote control).
Adjusting the beep sound
1 Press the SEL for more then 2 seconds
"BEEP ALL" or "BEEP 2ND" appear
2. Press the VOL+/- (Press the VOLUME A V on the remote control) to select beep sound.
BEEP ALL: When any button is pressed, beep sound.
BEEP 2ND: When a key is long pressed (1sec), beep sound.
Answer taken from LG documentation
As for the alarm. I found no documentation that you can set an alarm on your car radio.
thttp://www.retrevo.com/support/Blaupunkt-MP3000-Car-Receivers-manual/id/550ci556/t/2/ here is your manual....just click the red download button the fill in your email addy and the code and it will download for you. It is a pdf file so if it wont open you need adobe acrobat reader...d/l that and try again... for the clock keep pressing disp till you see clock 12----then rotate the dial to select 12 or 24 hr format----then press disp to display clock adjust-------then press muts/sens to flash the hour-----rotate dial to desired hour-----press mute/sens to flash min-----rotate dial for correct min----press disp to complete the time set.
don't forget to give testimonial and the votes 4 thumbs up if I helped.
Hi, Yes, Disp/Title stuck button could be cause of no other button function because one button can be operated at one time in these units and if any button stuck for some reason, other buttons would be inoperative. Take off front panel by pressing eject button at lower left side and try to release Disp/Title button with finger nail, if that does not help then remove screws at back of front panel, take off back cover then take out circuit board carefully and press gently, little bit Disp/Title knob from inside front panel to send it back in its original position then put circuit board and put back cover and tight screws. Check Disp/ Title button gives little click sound while pressing as other buttons give that sound. Put front panel in unit and check. Hope these info will help you. Let me know if you have additional question. Thanks.
press the disp button and release then press again for 2 seconds it will start flashing and then use your forward or back buttons to set your time when you have the correct time time press the disp button again and release to set the time.