Question about Printers & Copiers

1 Answer

Sharp AR-5127, the error code U2-40

I have the copier machine Sharp AR-5127, the error code U2-40 appears and coping cannot be done. I tried what you wrote before but it didn't work
I don't have a [Image Quality] key. I have [Auto Image] key and 14 can be entered directly without pressing 10 + 1 + 1 + 1 +1 GUD DAY!!!! I HAVE Sharp AR-5127 a problem is call for sevice f1-15. anybody can help mme on this problem tnaxs a lot

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

U2-40 is a board error, F1-15 is finisher lift motor error.

To reset: #, interrupt, clear, interrupt. (screen should say service mode), enter 16, print, are you sure? , yes.

For the finisher error, follow above procudure, entering 14 instead of 16. if error returns, disconnect the finisher

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have the copier machine Sharp AR-5127, the error code H4-00 appears and coping cannot be done what do i do


The heating element or the thermal fuse in the fuser unit has failed. Try pressing clear,interupt, 0, interupt, 1,4, the blue copy button to reset it.

May 23, 2012 | Printers & Copiers

3 Answers

Solution for SHARP AR 5127 error U2-40 call for service


This means that the cartridge's sensor is miscommunicating with the copier memory thus the code U2 -40. You should clean the inner sensor connector and the toner sensor of the spilled toner by low blower. Perform this code ;# , interrupt , C, Interrupt keys in that order and press 16 then Print key and the code will be cleared.

Feb 02, 2010 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

ERROR CODE U2-40: SHARP AR 5127


ERROR CODE U2-4 COULD BE RELATED TO THE MEMORY BATTERY BEING DEAD ON TEH MAIN BOSRD IF IT IS AN OLD MACHINE SO YOU COULD CHECK THSI OR REPLACE AND TRY WITH NEW

Jun 12, 2009 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

Sharp AR-5127 H2-00 code reset


Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Feb 01, 2009 | Printers & Copiers

3 Answers

Error code sharp 5127


go to percision roller in phx arizona you can get all sharp service manuels i have alos seen them on ebay?

Jan 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Error messsage cal for service E1-88 from sharp AR-5127


Unplug the Machine, remove the board you installed, re-seat the board,
make sure everything is connected, turn machine back on..

This is what the Manual says:
IMC PWB communication trouble (Timeout)
Check the connectors of the IMC PWB
and MCU PWB.
Check the grounding of the copier.

If you need further help let me know..

Oct 26, 2008 | Sharp AR-5316 Advanced Digital Imager...

7 Answers

Sharp AR-5127, the error code U2-40


SOLUTION: ERROR MESSAGE U2-40, SHARP COPIER AR-5127
PRESS #
PRESS =
PRESS C
PRESS =
TYPE 16
PRESS ENTER BUTTON (the button for making photocopy)
PRESS 'OK' TWICE
Note: be fast in pressing all the buttons.
FROM EKPA ONU - (+2348055790979, NIGERIA,LAGOS)

Apr 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

2,301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...