Question about Sewing Machines
Tensions all should be set at "3" for general sewing if there is no other damage or lint trapped in the tension discs.
Try "flossing" each tensioner with a piece of cloth to remove lint.
If you are still uncertain, try 4 different colours and with all set at 3 to begin, adjust to suit what you see to be loose or tight (small adjustments each time)
If the little one has removed the knobs (they just pull off towards you) and turned the white adjustment wheel beneath, you need to set until happy as above, then put the outer knob back with number 3 in the 12 o'clock position.
Best of... www.bargainbox.com.au
Posted on Nov 26, 2008
Tips for a great answer:
Jun 11, 2014 | Janome HF-107
Nov 07, 2012 | Sewing Machines
Apr 05, 2011 | Janome Harmony 9102D Mechanical Sewing...
Apr 02, 2011 | Janome Memory Craft 4000 Sewing Machine
Apr 03, 2010 | Janome Sewing Machines
May 24, 2009 | Janome MyLock 644D
152 people viewed this question
Usually answered in minutes!