Question about Lexmark C510 Laser Printer

1 Answer

Lexmark c510 error message ;83 photodeve cart missing

I changed the power source over with out turning off the unit , then this error messsage appeared although the photodeveloper cart.is in place properly. ( the unit is 2 years old).I have removed the cartridge and replaced it several times with the same error appearing.
what is the problem?? help.

Posted by on

  • wayne churchill May 11, 2010

    Have you replaced the photodeveloper with a new replacement or just reinstalled the original?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

See User Reference
http://www.lexmark.com/publications/pdfs/c510/eng/userref.pdf

Understanding printer messages
pages 184 and 185

"Message:
83 Photodev Cart Exhausted

What this message means:
The photodeveloper cartridge is completely used.

What you can do:
Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Life Warning

What this message means:
The photodeveloper cartridge is nearing the end of its life.

What you can do:
• Press Go to clear the message and continue printing.
• Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Missing

What this message means:
The photodeveloper cartridge is either missing or incorrectly
installed.

What you can do:
Correctly install the photodeveloper cartridge to clear the message and continue printing.
See also: Replacing the photodeveloper cartridge [page 73] "

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Lexmark C510 Laser Printer was giving me- 83 Photodev Cart Warning so I replaced Photodeloper but printer is not recognizing that I replaced it


To specify which supply has been replaced:

Make sure the printer is on and the Ready message is displayed.
  1. Press and release Menu until you see Supplies Menu, and then press Select.
  2. Press and release Menu until you see Replace Supplies, and then press Select.
  3. Press and release Menu until you see the relevant item:
      • Yellow Toner
      • Magenta Toner
      • Cyan Toner
      • Black Toner
      • Photodev Cart
      • Fuser

  4. Make sure the item you replaced is on the second line of the operator panel. Press Select.
  5. Press and release Menu until you see Replaced, and then press Select. The Saved message appears.
  6. Press and release Return until the printer returns to the Ready state.

Feb 14, 2012 | Lexmark C510 Laser Printer

1 Answer

Hi, I have a Lexmark C510 Laser Printerphotodev exhausted message, changed it and still have the massage! Maybe it needs to be reset? I shut it off and restarted, but still have the message.. HELP!...


The 83 Photodev Cart Exhausted message on the operator panel indicates that you must replace the photodeveloper cartridge immediately. To replace your photodeveloper cartridge please clink on the link below.
http://bitly.com/nG3Toi

Jun 17, 2011 | Lexmark C510 Laser Printer

1 Answer

屏å¹?提示ï¼?83 photodev Cart Exhausted æ??ä¹?å??äº?ï¼?


You need the OPC Image Unit 20K0504 which contains the developer. This is a supply item

Whit
Item, Inc.

Aug 10, 2010 | Lexmark C510 Laser Printer

1 Answer

Message of '83 photodev cart exhausted', where abouts is it, in the machine?


Here's an article in the Lexmark website on How to Replace the Photodeveloper Cartridge in the C510. Just click on this link: http://bit.ly/bOJQDz. Follow the instructions carefully. Hope this helps.

Jun 14, 2010 | Lexmark C510 Laser Printer

1 Answer

Lexmark C510 Code error: 995 Service Engine Error


Hi,
The error 995 refers to a problem with the High Voltage Power Supply. This could mean three things one is that the Photodeveloper cartridge is damaged and needs to be replaced. The second one could be a problem with the High Volt Power Supply not providing enough charge to the Photodev. The third thing could be that the Engine Board is damaged causing the error in the display. You can try to reset the Photodev by pulling it out and the seating it back in the printer.

Jan 08, 2010 | Lexmark C510 Laser Printer

1 Answer

Not printing


The problem could be the Developer Clutches not turning the cartridge. Thus toner does not develop and get transferred to the photodev cart. This may be due to a missing retainer clip try replacing the clutches. That should solve the problem.

Dec 09, 2009 | Lexmark C510 Laser Printer

1 Answer

Color cartridge missing


You may want to remove the power brick at the back of your printer, wait a few seconds and reinsert back. Then try the steps listed in the user guide to install new carts, page 42.

http://www.lexmark.com/publications/pdfs/x5150/eng/ug.pdf

Jun 01, 2009 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Error message 83 - photodev cart exhausted


The photoev cart is the photo developer cartridge.

See User Reference
http://www.lexmark.com/publications/pdfs/c510/eng/userref.pdf

Understanding printer messages
pages 184 and 185

"Message:
83 Photodev Cart Exhausted

What this message means:
The photodeveloper cartridge is completely used.

What you can do:
Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Life Warning

What this message means:
The photodeveloper cartridge is nearing the end of its life.

What you can do:
• Press Go to clear the message and continue printing.
• Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Missing

What this message means:
The photodeveloper cartridge is either missing or incorrectly
installed.

What you can do:
Correctly install the photodeveloper cartridge to clear the message and continue printing.
See also: Replacing the photodeveloper cartridge [page 73] "

Dec 08, 2008 | Lexmark C510 Laser Printer

1 Answer

83 PHOTODEV CART MISSING


To specify which supply has been replaced:
  1. Make sure the printer is on and the Ready message is displayed.
  2. Press and release Menu until you see Supplies Menu, and then press Select.
  3. Press and release Menu until you see Replace Supplies, and then press Select.
  4. Press and release Menu until you see the relevant item:
      • Yellow Toner
      • Magenta Toner
      • Cyan Toner
      • Black Toner
      • Photodev Cart
      • Fuser
  5. Make sure the item you replaced is on the second line of the operator panel. Press Select.
  6. Press and release Menu until you see Replaced, and then press Select. The Saved message appears.
  7. Press and release Return until the printer returns to the Ready state.

Oct 15, 2007 | Lexmark C510 Laser Printer

Not finding what you are looking for?
Lexmark C510 Laser Printer Logo

827 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...