Question about GE Zoneline AZ38H12DAD Split System Air Conditioner

1 Answer

My ac works fine but when i turn to heat no hot air

When I turn on to heat it just blows the air not hot air fan and every thing works fine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Take contuity tester to test heat protecters and inline fuse in coil area /could be that you might have to change main board

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Rheem Classic Super Quiet 80 gas furnace (for heat). The fan stops when the "heat" turns on.


Any time I ever had trouble,first thing to suspect is the thermostat.
They lose contact sometimes and sometimes you tap the face and they work til next glitch.
If the thermostat has some years on it,go ahead and replace it.
Can't you just leave the heat and fan in auto? That would be best,I think. don-ohio

Jan 10, 2017 | Heating & Cooling

1 Answer

Hi, i just bought a second hand amcor air conditioner but it dosent send hot air, what can be the problem?


Air conditioners normally blow cold air, unless it has a built in heat pump. You should post the model with your questions.

Jan 08, 2017 | Amcor Heating & Cooling

1 Answer

Mitsubishi slit air conditioner model MSZ-GA80VA I turn on and turn off cauting out door unit fuse blown I replaced still The fuse is blow is the out door air con unit Note.unit in door stop not inpos


turn off everything electrical in house and retry with good fuse or breaker if still blows unit needs repair possible shorted capacitor? if it runs it may need to be on its own circuit dedicated to it alone

Jan 05, 2017 | Mitsubishi Heating & Cooling

1 Answer

Electric Furnace stopped running


You have one of two problems. Either the capacitor for the motor has failed or the motor has failed. I would turn off the power to the unit and see if you can locate the capacitor and remove it. An ac supply or electrical supply house can match up the capacitor. This is relatively inexpensive. Otherwise you will need a new motor.

Nov 11, 2014 | Heating & Cooling

1 Answer

My termost set to a/c, the fan auto, blow very well, but when I switch to heat and the fan auto, doesn't work, but if I put fan on work why?


the thermostat says to call for heat buildup in the work if its not cold enough the thermostat won't call for heat and I won't go on but when it gets cold and the thermostat set to the temperature you want or hire someone that doesn't cycle

Oct 12, 2014 | Heating & Cooling

1 Answer

Household steamer not heating at all


Well, first thing, just hook up service water and turn it on so the water heats up. Leave it long enough for water to get hot. If water doesn't get hot like should, then heating unit is malfunctioning. If it is getting hot after a while, you pull the handle trigger and water comes out, you have to wait long enough for the hot water to get to the head/trigger for it to go into the nozzles. If it was working ok before, and you were waiting for the water to heat, then then it should be working fine. Tell me what is happening if you wait for water to heat and get to the nozzles. I'm right here at my computer and we can get this thing going if the heater unit is good. Regards, Rigger.

Oct 07, 2014 | Heating & Cooling

1 Answer

Why can't I lower my honeywell 8500 below 67 on cool?


With a two story house you have to be aware that cold air flows downwards so any cold air coming from an ac unit will flow downstairs( normally down the stairway) so unless you can close off the down stairs then the up stairs unit will be cooling downstairs as well. Ac units have a thermostat located in the air intake and it cools until the cold air has risen to that point. In effect the space above the ac unit will be hotter than the floor. Knowing how they work ,you can see that the upstairs unit will never reach the set temperature because the cold air is continually heating from the house and will never get to the top thermostat.
So your solutions are
1-- fit controls that restrict the cold air from leaving the upper floor (Doors)
2--don't run the upper ac unit unless you are living up there (waste of money
)3 place an ac in each upper room and keep the room door closed

Aug 12, 2014 | Heating & Cooling

1 Answer

Heat will not blow hot air model #310aavo48090oabjd serial #0205a42429


give name make of unit and set up of system oil/gas ect...

Oct 28, 2012 | Heating & Cooling

Not finding what you are looking for?
GE Zoneline AZ38H12DAD Split System Air Conditioner Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Heating & Cooling Experts

ray gallant

Level 3 Expert

37602 Answers

Todd B

Level 3 Expert

571 Answers

Tom Chichester

Level 3 Expert

26110 Answers

Are you a GE Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...