Question about Audio Players & Recorders

1 Answer

I work at my church and need help with connecting an audio feed from the sanctuary to the fellowship hall where tvs are located. I am running a 1/4" cable out of the soundboard and into a female 1/4" audio cable (red, white, black, and green wires). From there the cable goes about 50 ft to a S-Video/RCA Audio 1 in 4 Amp and splits off to each tv. My problem is there is a major buzzing that overpowers the audio for the services. The female 1/4" has the red wire soldered to the connector and the black and green soldered as a ground. I found a splice that only had the black connected to the black and the white connected to the white. And for the RCA connector I have the red soldered to the red connector with white as ground and the black soldered to the black connector with green as ground. Can you help me stop the buzzing noise and bring clear sound to the tvs?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Audio Player... Master
  • 27,146 Answers

The cable must be screened.

Posted on Mar 12, 2017


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 71 Answers

SOURCE: Getting clear audio to televisions from a soundboard

I think you should buy a video sender. It will take audio from your audio console and send wireless to a free channel to any free TV channel. No cables!

Here's one on ebay:

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I get the steel Custom building in Florida?

Steel Buildings are fantastically versatile, providing its owners with many benefits. Steel add more value to the residence. Steel only needs a simple hose-down for a fresh. Steel buildings are used for: metal garages, barns, workshops, breweries, auto shops, church sanctuaries etc.Florida Steel Buildingscan be a great option for you to buy steel custom building with good quality and great customer support.

Apr 11, 2017 | Refrigerators

1 Answer

My church is looking for brass band instruments funding,but we don't seem to get one

.try lots of fund raising activities
using church hall and car park

church fete
baby sitting
games/movie nights ,
plays ./drama /choir nights
cake auctions,
car washes
car boot sales
bingo ,

brass instruments are never cheap
you need to look around...for used brass instruments and brass sheet music
in second hand shops , garage sales , online sales newspaper ads

never knew any government or corporate companies to throw money into brass bands


Oct 18, 2016 | Music

2 Answers

How to reach Achanakmar wildlife sanctuary?

go google and type in -- Achanakmar wildlife sanctuary and there will be pages for location and maps as to how to get there

Jul 23, 2016 | HOW Video Game Consoles & Games

1 Answer

Where can I buy communion supplies

Usually at a christian store or ask your local church.

Feb 03, 2015 | Broadman & Holman Fellowship Communion Cup...

1 Answer

What is the meaning of symbols in the logo of st.john hill academy

The Meaning Logo i believe is:

logo1.gifThe clover or leaf-like ornament with four lobes found in the logo is called a Quatrefoil. It is found throughout the architecture of our building. It is most prominent in stone work above the main entrance. You will see it at the top of the Gethsemane window. This shape has sometimes been interpreted to represent the four Gospels - Matthew, Mark, Luke, and John.

The shadow effect around the Quatrefoil represents diversity and growth, which are a part of our mission.

The four diamond shapes, also a Quatrefoil, represent the four traditions that came together in 1957 to form our denomination, the United Church of Christ. Those traditions are: Christian, Congregational, Evangelical, and Reformed. St. John Church was originally part of the Evangelical tradition. The uneven or jagged edges represent movement, calling us to always move forward with the spiritual, compassionate, nurturing, worshiping, learning, and fellowship focus of our mission.

Hope this helps. from fixya

Jun 13, 2011 | Home

1 Answer

We have a Panasonic PT-D5600U DLP Projector, and the rear infrared sensor is not working. The front sensor works fine, but the projector is ceiling mounted, and we need to utilize the back sensor from the...

Hello: in most cases, front and back sensors are identical. Might even be those little boards, as well.
I've seen repeated problem with sensor board circuitry, not a IR sensor, itself. in my 2 cases, there was a faulty sms ceramic capacitor, twice at the same make and model of Phillips TVs. If you can handle safely open and close top part of projector's cabinet, you will see those 2 small pc boards, connected to control panel. To get a part#, go to "", then look for "support", then 'parts ordering". enter your model# and you'll find whole list of the parts for your set. You don't need any authorization to buy 2 little assemblies. Get 2! The other one will quit sooner or later! shouldn't cost too much, anyway.
Good luck,

May 13, 2009 | Panasonic PT-D5600U DLP Projector

1 Answer

Yamaha DSP-A3090: All video settings trip unit and it turns off

Is the first set "stereo" settings and the 2nd set "surround" settings?
If so that may mean that the surround speakers arent all connected right.

Jan 14, 2009 | Yamaha DSP-A3090 7-Channel Amplifier

1 Answer

Getting clear audio to televisions from a soundboard

I think you should buy a video sender. It will take audio from your audio console and send wireless to a free channel to any free TV channel. No cables!

Here's one on ebay:

Nov 25, 2008 | Audio Players & Recorders

1 Answer

Cd vs. microphone

A few possibilites.

1. Even though you have some kind of peak limiting on your mics, the signal might still be peaking somewhere along the audio path and causing distortion. Gain controls might be set too high somewhere along the way.

2. The amp you are using might simply be driving too much power for the speakers to handle.

3. A faulty connection, connector, wire or input could cause distortion of something like distortion which is of course would be more apparent at higher volumes.

4. Equipment placement could be picking up sounds or interference from other sources.

5. If you are able to discern level peaks but they are occasional and not flat out, then a compressor placed in the mic signal path could certainly help - otherwise see # 1 above.

Best of luck in solving this.



Oct 25, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

5508 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75756 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides