Question about Samsung PCK5315RX TV

1 Answer

I need to program the remote from my TivoHD to operate power and volume on my Samsung LN52A850

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 34 Answers

You should be able to go to the tivo menu and push Messages and Settings, followed by Settings, and finally Remote Control. Then follow the directions on the screen. You normally would program volume and mute, power, and tv input. It will walk you through the manufacturers and give you the codes to try.

If the codes do not work, it is possible that Tivo does not have the codes for the TV yet, but I would first make sure that you have the most recent version of the Tivo operating system (force a network connection a few times).

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I switch the Input Select to watch a movie when the button doen't work?


I recommend getting a universal remote to replace your tv remote.

Apr 28, 2014 | Symphonic ST420FF 20" TV

1 Answer

How can i program my remote control to operate my TV?


You will need to get a programmable remote. The one you have will not work.

Jan 26, 2014 | Standard (CRT) Televisions

1 Answer

Want to program my dish network remote to operate the phillips/magnavox TVs volume and turning it on and off. The TV is a 1998


Hello!! It should be pretty easy to get this programmed. Below are instructions to program the remote along with codes. I hope this helps!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code.

566
770
550


or if that doesn't work, here are the steps for a power scan. The remote scans the TV for the correct code.

1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.

Becki Barned
DISH Network Customer Service

Feb 27, 2011 | Philips Magnavox 20MT133S 20" TV

1 Answer

Hi. Can you please tell me the correct code for the Curtis tv for Cablevision Remote? We have two remotes now, the cable remote cannot operate the volume or the power on/off tv, must use Curtis remote.....


Hello
Codes for Curtis TV with Cablevison remote control are:-

070 004 101 127 236 011 072 081 120 164

*Tip: The iO button will light on for 20 seconds. The

next step must be entered while the iO button is
on.

STEP2 Press the [INFO] button.

The iO button will blink number of times indicating the

number of each digit of the code number. Each digit is

separated by a 1 second interval of the iO button being

turned off.

Example :One blink, three blinks and eight blinks with

an interval of 1 second of iO button being

turned off, indicates the code number 138.


Note :Ten blinks is equal to the number 0.


D. Program the Volume Controls.

By following the steps below, the user can program

the volume controls (Volume UP, Volume Down and

MUTE) . The default volume control settings on the

remote control is TV volume control. If you wish you

can control the volume via your CABLE box, use the

following steps.

STEP1 Press the [CBL] button and the [SEL] button

simultaneously for 3 seconds. The iO button

will turn on.

*Tip : The iO button will light on for 20 seconds.

The next step must be entered while the

iO button is on.

STEP2 Press the [VOL +] button.

STEP3 Press the [CBL] button.

The iO button will blink twice to confirm the

programming.

To return to original state:

If you wish you can control the volume via your TV,
repeat the above steps by pressing [TV] in STEP3 .
OK.

Dec 23, 2010 | Curtis CM13102 13" TV

1 Answer

Model F32674SB remote


Hi,

You can use any of the universal remote controls
RCA
Philips
GE
Samsung

For programming the remote you can see the video below which is given for RCA universal remote control.Same steps are incorporated for all make.

http://www.youtube.com/watch?v=5YHGdPOy5dc

Thanx

Jul 23, 2010 | RCA F32674SB 32" TV

1 Answer

Orion TVD2710. Lost remote, can't change signal input


I would suggest you try to find a universal remote that has an "input" or "source" button and program that one to your tv. By pressing the "source" or "input" button, it will change the input to the tv. I hope this helps! -Der Strom

Apr 06, 2010 | Orion STV2763 27" TV

1 Answer

Ican`t program my samsung tv to my directv remote, to control the the tv`s volume,on off button, and the volume. samsung, tx T2082 slim fit dolby digital


All remotes available are in the hands of DirecTV and Samsung. I believe DirecTV has a way of getting their remote to try every code that's stored inside their remote. If that doesn't work, you will have to use two remotes.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further

Aug 05, 2009 | Standard (CRT) Televisions

1 Answer

STB with Magnavox remote (need codes) - Samsung #TXK2766


Did extensive checking and finally found out that the remote for Magnavox TB100MW9 analog/digital converter is not made for volume control. The channel changing buttons are half-way operable--sometimes yes, sometimes no--and to think they call this a remote! Therefore you must keep the other TV ready remote that you have been using (tape them together probably) for volume and mostly channel change. I know what Magnavox can do with these remotes - and you know how much more Magnavox I will be buying in the future. Nada, none,---from a very disappointed, frustrated customer.

Feb 12, 2009 | Samsung TXG2746 27" TV

1 Answer

Samsung WS32Z308P TV has tuned out


I rand the Samsung help desk and they guided me through how to reset the TV back to its original factory settings. This solved the problem.

Jul 17, 2008 | Samsung WS32Z308P 32" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...