Question about Technics SL-1210 Turntable

1 Answer

Deck does not play/turn on

I was replacing the target light and when i turned the deck over i accidently turned it on and the wires tuched and now it does not turn on or play. i have replaced the plug fuse and both the internal fuses from my other deck but the deck does not turn on or play still.

Posted by on

  • angelak_scot Dec 03, 2008

    i dont know very much about turntables i set  them up an mixed on  them straight away then disconnected the power when i reconnected the power my mixer had power but both of my turntables had no power even when i change power socket there is nothing no lights its like the power isnt makeing into the turntable can you please help with my problem 


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Problem is not the fuses, but the power supply / power transformer has blown. This is why you should always wrap exposed wiring with electrical tape or heatshrink tubing.

The power supply can be purchased HERE, but this is not an easy replacement. And if you blew it by not properly replacing the Pop-up light, than I DON'T suggest you try to replace the power supply on your own either. You could really cause even more damage, and possible harm to yourself and your property.

- OPTiC
Turntable Repair Expert
Digital Analog Therapy
A DJ PRO AUDIO Co.

Posted on Dec 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I took my Pioneer SX-450 Receiver and Pioneer CT-1040W Tape Deck apart to move it. Put it back together. Now can't get a tape to play.


After putting a known good tape in the deck, push play, if the tape doesn't move, try rewind and FF. If nothing happens, the deck has a problem. I assume this is a cassette deck. If so, I always try the thrift stores for a new(used) one. There are good bargains there.

Dec 22, 2016 | Pioneer Audio Players & Recorders

2 Answers

How do you dub cassette to cassette


Hi
If you have a dual cassette deck, then one deck will only play cassettes,whilst the other will have a record facility as well.
Basically you need to place the original cassette in the play only deck and the target cassette in the record/play deck.
Start the playback in the play only deck and immediately press the record and play buttons together on the record deck. Some decks have high speed dubbing but this varies so much that you will need to consult your manual for this.
Cheers

Apr 09, 2015 | Audio Players & Recorders

1 Answer

Technics 1210 mk2


As everything was normal before you started the work, I'm thinking you might have disturbed something. Such as caused a wiring plug to come loose. Maybe even a bad solder joint somewhere?

Apr 28, 2014 | Audio Players & Recorders

1 Answer

Cutting grass on even


If the deck is level maybe its the wheels, check your tyre pressure. Stephen.

May 06, 2010 | John Deere 420,1020,2010,2020,2510,2520...

1 Answer

Target light won't turn off


Your wires are crossed. You'll have to switch them out. Make sure when you put the wires back together, that they are covered properly with either electrical tape, or heat shrink tube. If any part of the wire is exposed and it touches the cabinet, it will ground/short out your turntable, and you'll have an even bigger and more expensive issue to fix.

- OPTiC
The ORIGINAL 1200 TECHNICIAN.

Technics DJ Repair Videos
Technics DJ Repair
Technics DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Mar 30, 2009 | Technics SL-1210 Turntable

1 Answer

Sony output problem


All i did was mess with the REM wire, and found out i had to hook the REM wire to the blue/white wire on the deck. Instead of the blue/white wire, i had it hooked up to the solid blue wire on the deck which was preventing my amp from playing on CD.

Nov 22, 2008 | Sony TA-E9000ES Amplifier

1 Answer

Cd player installation


read my other solution on the other one you posted. yes, the fuse is more-than-likely blown. but also you wired it completely wrong. look on my other solution on the other one you posted, it has the correct wiring diagram. there are 2 wires on the wiring diagram i posted that have the lights. one red is the int.light, and the other one is the turn signal wiring.

Aug 22, 2008 | 1990 Ford Taurus

3 Answers

Kicker 750.1 Amp wont play music


it is probably the rca inputs on the amp may have fried. was your cd decked turned up loudly before the power went out? did any wires accidently touch each other? If had worked fine and then suddenly stopped, than either a wire came loose or the inputs fried. try using different cables and I also suggest disconnecting power for 24 hours and then reconnect. If the green light is on then it is getting power and the problem is in the rca cables or the inputs

Jun 03, 2008 | Kicker 06ZX750.1 Car Audio Amplifier

4 Answers

How do i bypass the parking brake switch in order for my video to play


you need 2 toggle switches . yello/blue wire to switch - switch to ground.
yellow/black wire to switch- switch to red ing. wire. turn this switch on and pulse the other(yellow,blue) 3 times and leave on, then turn the other switch off and then you can ride and watch dvd. just did it this morn. QTRHRS

Feb 24, 2008 | Alpine IVA-D310 Car DVD Player

1 Answer

Remote wire


easy way to find out ..test light .one end into blue wire .other end onto earth turn deck on .if lights up yes ..just check that if you insert a disc or anything it does not shut down ..if it does it will not turn your amp on when play discs

Jan 22, 2008 | Pioneer DEH-P3500 CD Player

Not finding what you are looking for?
Technics SL-1210 Turntable Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4943 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...