- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
amitchhab276: From the user manual for your DSC-T5 (click here), that error message means:
A camera malfunction has occurred. Initialize the camera (page 52), then turn the power on again.
From page 52: After you have cycled-power, you need to go to the Setup1 screen and select "Initialize" and choose "OK" with the up arrow and then press the circle button. Again press the up arrow and circle to select "OK" to reset the camera to default. settings.
Make sure that the power is not disconnected during reset!
Please follow the instructions given below 1. Turn OFF cam 2. Remove the battery or the power supply 3. Turn the switch to CAMERA for about 30 sec 4. Turn the switch to OFF 5. Install the battery or power supply 6. Turn the switch to MEMORY 7. Open the LCD cover and press the RESET button ( small inner button ) 8. You will be prompt to adjust date/time. Do it 9. Take some pictures
Second step: 1)at setup do a initialize. 2)go to flash function to turn off the flash (must do it fast,b4 the E91:01 appear,if not you need to reset it again ) by
now E91:01 will never appear.you can use it like normal,be sure not to
turn on your flash again or go to night mode.if not you need to perform
step 1 & 2 again.
Hi! Try initializing the camera. Error 91 is a flash error in Sony cameras. It is probably a dead flash fuse on the motherboard (most common problem) or a faulty flash board. If you have a multimeter, I can help you locate and test the fuse and if you have a soldering iron - even fix it. My e-mail is email@example.com. Otherwise, you should contact your local Sony service center or other local camera service center.
I have a method to stop the E:91:01 error flashing on the screen.it were not solve the flash function but atleast you can use the camera without flash.
1)at setup do a initialize.
2)go to flash function to turn off the flash (must do it fast,b4 the E91:01 appear,if not you need to reset it again )
by now E91:01 will never appear.you can use it like normal,be sure not to turn on your flash again or go to night mode.if not you need to perform step 1 & 2 again.hope it help.