Question about Dryers

1 Answer

DEIX2 not heating Fisher & Paykel

I move it back a few inches and it quit heating

Posted by on

  • propcon Nov 25, 2008

    I only moved it 2-3 inches. I can see that the air is going through the hose just fine because it is moving around. I don't think that is the problems. any other ideas?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 291 Answers

When you moved it back you crimped the vent hose / pull dryer back out from wall and make sure it is curled with no kinks as you slide it back into place and it will be fine.
Larry

Posted on Nov 25, 2008

  • Larry Youngblood
    Larry Youngblood Nov 26, 2008

    the hose should not be moving around so with dryer running go outside and check the outlet and see if air is coming out strong, if not clear vent hose from wall to outside ,,,,,, the air is trying to get out but not.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher Paykel DEIX2 electric dryer parts list


If you need parts manual and to order parts go to www.coolblueworld.com Thats the official website.

Aug 31, 2012 | Fisher and Paykel Dryers

1 Answer

No heat


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Sep 19, 2011 | Fisher and Paykel DEIX2 Electric Dryer

1 Answer

The model of my Fisher Paykel dryer is DEIX2 and it runs but doesn't get hot. It's four years old. Would it be cheaper to replace than repair? Thanks.


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Jan 04, 2011 | Fisher and Paykel Dryers

1 Answer

How to replace drive belt on Fisher Paykel deix2 ?


dryer runs too long doesn't seem to want to shut off automatically when clothes get dryer

Oct 30, 2010 | Fisher DEIX2 Dryer

1 Answer

Looking for a parts list for a Fisher Paykel DEIX2 dryers


DEIX2 - one of the heat coils remains hot after dryer stops. I can see that it is still red (hot) after dryer is turned off. I need to unplug dryer for it to go off.

Oct 14, 2010 | Fisher and Paykel DEIX2 Electric Dryer

1 Answer

My fisher paykel DEGx1 dryer top load is only blowing cold air


Could be something simple like a limit popped due to clogged vent or a open heating element. DEGx1 Service Manual

Jul 22, 2010 | Fisher and Paykel DEIX2 Electric Dryer

1 Answer

Fisher Paykel Dryer is taking 3 hours to dry(DeIX2)


Check your cvent going outside. also check to see if the vent is smashed. try using the time dry cycle and see how your clothes turn out. if they are still wet or damp. you have a heating problem. try those solutions.

Oct 19, 2009 | Dryers

1 Answer

Dryer tumbles, no heat


Fist thing to check is if the manual reset on the heater box has tripped. That dryer can be serviced from the front. Also, there is a heater upgrade kit that can be purchased from Fisher Paykel Parts that has several updated parts in it for the top load electric dryers.

There are several things that can cause the reset to pop out. You may have a lint build up behind the shroud where the lint bucket fits.

This is a complicated appliance. You may wish to obtain a service manual for it.

Link to factory service manual:
http://fisherpaykelparts.net/index.php?categoryid=115&productid=39

Link to heater upgrade kit:

http://fisherpaykelparts.net/index.php?categoryid=112&productid=32

Dec 17, 2008 | Fisher and Paykel DEIX2 Electric Dryer

2 Answers

Fisher and Paykel Dryer will not spin, motor buzzing


take top off. set it going and give the drum a push by hand. if it starts and keeps going then the fault is the motor capacitor - cheap part

Nov 14, 2008 | Fisher DEIX2 Dryer

1 Answer

Fisher & Paykel DEIX2 Online repair manual?


I couldn't find one either. I would like to know what the different codes mean. Can anyone help?

Apr 01, 2008 | Fisher DEIX2 Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...